
词语导航
基本信息
词语:等体过程
繁体:等體過程
拼音:děng tǐ guò chéng
英语翻译
【化】 isochoric process
分词翻译
等的英语翻译:
class; grade; rank; wait; when
【机】 iso-
体的英语翻译:
body; style; substance; system
【计】 body
【医】 body; corpora; corps; corpus; leukocytic crystals; scapus; shaft; soma
Somato-
过程的英语翻译:
course; procedure; process
【计】 PROC
【化】 process
【医】 course; process
【经】 process
翻译例句
1. 抛光过程中决定抛光质量的参数有:抛光浆体、抛光温度、抛光时间等。
The parameters deciding the quality in polishing process are as follows: slurry, temperature, wafering time, and so on.
2. 在纺丝过程中,要严格控制煤沥青熔体的粘度、纺丝温度、压力、卷绕速度等主要参数。
The main parameters of viscosity, spinning temperature, pressure and winding velocity for coal tar pitch fluid should be rigidly controlled during spinning.
3. 以MDI - 50为原料,制得复合塑胶跑道施工要求的预聚体,探讨催化剂、橡胶颗粒、增塑剂等对反应过程及制品性能的影响。
Prepolymer based on MDI-50 for athletic tracks was prepared, the effects of catalyst, rubber granule and DOP on reaction process and product performance were also studied.
4. 影响碳纳米管阴极场发射稳定性和寿命的主要因素有真空度、场发射过程中的热效应以及场发射体对场发射电流的承载能力等。
Field emission stability and life time of CNT cathode is closely related with the vacuum level, thermal effects during the emission and the current transport capability.
5. 结果:在薄膜包衣放大生产过程中,载药量、片芯的质量与设计、挡板的类型、锅体转速、设备的干燥能力及喷液速度等是影响包衣产品质量的关键因素。
Results: the key factors during film coating included pan load, quality and design of the core, baffle style, pan speed, drying capability of the coater and fluid delivering rate.
6. 药物对映体结构特异性对局麻药药代动力学的各个过程都有着很大影响,包括药物的吸收、蛋白结合率、代谢等。
The enantiomer-specific structure of local anaesthetics has large impact on the pharmacokinetic process of these drugs, including absorption, protein-binding ratio, metabolism, and so on.
7. 以制造泵体发泡模具为例,详细介绍了在LOM原型的基础上,通过LOM原型的预处理、电铸和电弧喷涂等工艺手段快速制造发泡模具的过程。
The manufacturing process of foaming mould of an oil pump body by using LOM prototype, electroforming and wire-arc spraying was introduced in detail.
8. 详细研究了坐标系统的转换,处理图像数据的过程,体素排序等。
Particularly the conversion of coordinate systems, processing of the image data, and voxel ordering are studied.WWw.WeNtiYi.COm
9. 这种方法已经被用在一些生物活性分子的全合成过程当中,如甾体酮类似物等。
The methodologies have been used in the total syntheses of several biologically interesting molecules, such as estrone analogous.
10. 其基本过程包括合金熔炼、预结晶器预热、熔体搅拌和振动、凝固拉坯等基本环节。
The essential procedures consist of alloy melting, preheating pre crystalizer, melt stirring and oscillation, solidification and drawing.
11. 介绍了高原高寒地区预制桥梁施工过程中混凝土施工、梁体养护、张拉压浆等的质量控制技术。
The paper introduces quality control technologies for concreting work, curing of beams, stretching and pressure grouting in the course of bridge precasting in the frigid plateau region.
12. 铸造过程中设备、工艺技术等的组合(即现代铸造系统的一体化)有助于提高铸造企业竞争力。
The combination of the equipment and technologies employed in a casting process, namely the integration of a modern casting system, helps to improve the competitiveness of foundry enterprises.
13. 它涉及到染色体结构的改变、顺式作用元件和反式作用因子相互作用等多种过程。
Many events such as the alteration of chromatin structure, the interaction between cis-elements and trans-factors are involved in this process.
14. 在减体重过程中,受试者每2周测定一次体重、腰臀围比、体成分和血压等。
Weight, waist circumference, hip circumference, body component, and rest blood pressure were measured every 2 weeks.
15. 介绍塑料成型加工过程中固态聚合物性质、熔体的流动性质以及热物理性质等。
This paper introduces some polymer properties including solid property, melt flow property and some thermal physical properties in the molding.
16. 分析在熔体直接纺过程中,熔体原料、工艺流程等因素对成品丝匀染率的影响;
The factors such as raw melt PET , process etc. on influence of the rate of even dyeing are analyzed in direct spinning process.
17. 采用DSC、TGA、IR及PGC等方法对AN-VDC共聚体纤维在空气中受热过程中发生的化学变化进行分析。
The chemical reactions which toke place while AN-VDC copolymer was heated in air were studied with the help of DSC, TGA, IR , PGC.
18. 石化行业中,粉体静电放电会引发火灾、爆炸等事故,因此,粉体处理作业过程中带电量的有效实时在线监控,一直是静电研究领域十分关注的前沿课题。
So, the effective, real-time and on-line detection of electrostatic charge of particles in the process of particles disposal is the advanced task which has attracted the most attentions.
19. 评述了聚氨酯弹性体所经历的热氧降解、水解、光降解和微生物降解等降解过程。
The mechanism of oxidative degradation, hydrolysis, photodegradation and microbial degradation of polyurethane elastomers are reviewed.
20. 把化工行业的相关技术,应用在白酒的生产过程中,让计算机帮助做酒体的勾调混合、老熟等后续工作。
The interrelation technology of the chemical industry were applied in the process of production of the distilled spirit, and let computer to assist to do the later works e. g. blending and aging.
21. 岩体变形大小与变化过程还与地质条件、施工爆破、锚固等因素有关。
The range and process of the rock mass deformation are related to the geological conditions, blasting, and c…
22. 针对等离子体渗氮工艺过程特殊,控制量变化复杂,人为因素影响较大等情况。
There is the special process for the techniques of plasma nitriding, which includes some complex controlling variables, a high influential artificial factor and so on.
23. 邓馨等( 2000 )的研究结果发现牛耳草离体叶片在脱水过程中类胡萝卜素的含量显著增加,推测可能存在叶黄素循环的保护作用。
Deng et al . ( 2000 ) found an obvious increase in carotenoids content in detached boea leaves during dehydration , indicating a protective role of xanthophylls cycle in dehydrated boea leaves.
24. 介绍了铝合金支撑体的锻模设计、锻造加热工艺和锻后热处理等技术;指出了设计过程中应该注意的问题和具体预防措施。
This article introduced the technology of aluminum alloy forging die design and heating technology as well as the heat treatment after forging.
25. 重点讨论铁电材料制备过程中的粉体团聚和膜裂纹扩展等有关问题。
Some technological problems in the preparation of ferroelectric materials are discussed in detail, such as the prevention of the powder agglomeration and the development of cracks of the film.
26. 对液相沉淀法合成纳米粉体的沉淀反应过程、洗涤过程、干燥过程以及煅烧过程等环节的控制方法及原理作了详述。
The control method and mechanism of the liquid precipitation method including reaction, washing, drying and calcining are introduced in details.
27. 当创建表以后,在建立索引,视图等。当删除表的时候,所有依赖于该表的对象都变的无效了,包括视图,包,包体,函数和存储过程。
Whenever you create a table, index, and view, and then drop the table, all objects dependent on that table are invalidated, including views, packages, package bodies, functions, and procedures.
28. 具有调阻精度高、刻线速度快、性能可靠等优点。可以长时间连续进行工作。整个调阻标刻过程可以自动完成,方便可靠,一体化设计。
With the trimming of high precision, fast groove, performance, and reliable. Can work long hours. Marking the trimming process can be automated, convenient and reliable, integrated.
29. 具有调阻精度高、刻线速度快、性能可靠等优点。可以长时间连续进行工作。整个调阻标刻过程可以自动完成,方便可靠,一体化设计。
With the trimming of high precision, fast groove, performance, and reliable. Can work long hours. Marking the trimming process can be automated, convenient and reliable, integrated.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
