调节螺栓用英语怎么说,调节螺栓的英文翻译


词语导航

基本信息

词语:调节螺栓

繁体:調節螺栓

拼音:tiáo jié luó shuān

英语翻译

【化】 adjusting bolt

分词翻译

调节的英语翻译:

adjust; accommodate; measure; regulate; screw; tune up
【计】 conditioning; governing
【化】 adjustment
【医】 a.; Acc.; accommodation; adjustment; control; regulation
【经】 accommodation; co-ordinate; modulation; reconcilement

螺栓的英语翻译:

【电】 bolt

翻译例句

1. 它的压力弹簧上还可设置压力调节螺栓,外壳侧部还可设脚踏板。

A pressure regulation screw bolt can be arranged on the pressure spring, and the pedals can also be installed on the lateral part of the casing.

2. 在上模节流棒槽内装入节流棒,将节流棒调节螺栓装配进节流棒的螺丝孔中,再装配上压块。

Mount restrictor bar into the restrictor bar groove of upper die, mount adjusting bolt for restrictor bar into the bolt hole in the restrictor bar, then mount lower press block, upper press block.

3. 我想知道我的后减震是不是调节好了,因为我能看见一个黄色的数字“1”,就紧挨着右边减震器的螺栓,合适吗?

I"m wondering if my rear shock is adjusted optimally. As it is, I can see the number "1", surrounded by yellow, just to the right of the bolt on the shock.

4. 调节探测范围以及在白天进行功能测试时应该将螺栓向左旋到尽头。

Adjust the detection range, and functional testing during the day should bolt to the left to the end.

5. 感应器起作用的光敏值要求可在2~2000LUX之间调节,螺栓向左旋到尽头为白天模式2000LUX(出厂设置)。

Photosensitive set; Photosensitive sensors work value requirements can be adjusted between 2 ~ 2000LUX, bolts to the left to the end of the day mode 2000LUX (factory setting).

6. 仪表件、螺栓、螺帽、锻造轴、调节杆、非标、美标、英标等。WWw.WENTiYI.cOm

Instrumentation parts, bolts, nuts, forging shaft, regulation pole, non-standard, American standard, British standard, etc.

7. 变剧凸轮是控制弹簧的有效圈数,节距刀下面螺栓调节弹簧高度;

Variable play cam is the effective number of the control spring, and the height of the bolt adjusting spring;

8. 板和螺栓调节的几何形状。

Plates and bolts for adjustable geometry.

9. 美式结构,刀头优质碳钢锻压,整体热处理,刃口高频感应淬火,刀片上偏心螺栓调节间隙,剪切硬度HRC30。

American type, drop-forged blades with high quality carbon steel, body heat treatment, cutting edges induction quenched, easy adjustment, cutting abilityHRC30.

10. 高弹性可调滑动板和Y形定位板通过蝶形螺栓在调节滑槽、调节滑槽处固定连接。

The high elastic and adjustable sliding plate and the Y-shaped positioning plate are fixedly connected at the adjusting sliding grooves through the butterfly shaped bolt.

11. 我们要采购制动鼓,制动盘,螺栓,螺帽,自动调节疲弱,坚果和螺栓。

We want to buy Brake Drums, Brake Discs, Bolts, Nuts, Automatic Slack Adjusters Nuts and Bolts.

12. 我们要采购制动鼓,制动盘,螺栓,螺帽,自动调节疲弱,坚果和螺栓。

We want to buy Brake Drums, Brake Discs, Bolts, Nuts, Automatic Slack Adjusters Nuts and Bolts.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!