低循环疲劳用英语怎么说,低循环疲劳的英文翻译


词语导航

基本信息

词语:低循环疲劳

繁体:低循環疲勞

拼音:dī xún huán pí láo

英语翻译

【化】 low-cycle fatigue

分词翻译

低的英语翻译:

hang down; low; lowness
【医】 hyp-; hypo-

循环的英语翻译:

cycle; recur; circle; rotate; circulation; repetition; revolution
【计】 DO-loop; for-loop; loop; unwinding
【化】 recirculate
【医】 circuIation; cycle
【经】 cycle; revolving; rotation

疲劳的英语翻译:

fatigue; prostration; tire; tiredness; wear out; weariness
【化】 fatigue
【医】 defatigation; fatigue

翻译例句

1. 还介绍了发生过载损伤后高温低循环疲劳断口的特征。

In addition the features of high temperature low cycle fatigue fracture surfaces are given.

2. 在同样的强化工艺条件下,低循环疲劳载荷大小影响强化效果,载荷越小效果越明显。

Under the same strength technique conditions, the size of low cycle fatigue load will influence the strength effect, and the smaller load means more obvious effect.

3. 这种热应力与离心应力、气动应力合成的综合应力可能引起涡轮叶片的低循环疲劳失效。

The synthesis of thermal, centrifugal and aerodynamic stresses may cause the low cycle fatigue failure of the blades.

4. 对在低循环疲劳试验过程中破裂的某型机低压涡轮盘组件的残骸进行了材质和断口分析。

The materials and fracture surfaces of a low pressure turbine disk assembly that was broken during LCF testing were examined. The fracture of the LP turbine disk was resulted from low cycle fatigue.

5. 设计了涡轮盘低循环疲劳试验件,在旋转试验器上进行了涡轮盘的高温低循环疲劳试验。

An experimental turbine disk was designed, and the high temperature LCF test of the rotor was carried out on the spin test rig.

6. 噪声载荷是一种高频、宽带随机载荷,在低循环疲劳寿命预测中被广泛采用的时域计数法很难直接利用。

Sonic loading is a high frequency, broadband random process. Basic cycle counting methods, which are prevalently used in time domain, are difficult to be applied.

7. 采用斯贝MK202发动机应力标准(EGD-3)提供的方法,对该涡轮盘的低循环疲劳寿命进行了估算。

The LCF Ufe of the turbine disk is evaluated using the method provided by SPEY MK202 engine stress standard ( EGD - 3 ).

8. 本文同时编写了该方法的Fortran计算程序,利用该程序可以比较准确地计算出膨胀节的低循环疲劳寿命。

In addition, the FORTRAN calculation program of this method is compiled in this paper, by which the low cycle fatigue life of bellows expansion joints can be calculated accurately.

9. 低循环多轴疲劳失效是航空发动机低压压气机轮盘的主要失效形式。

Low cycle multiaxial fatigue failure is the main failure mode of aeroengine compressor disk.

10. 本文对45号钢在静载荷下与在循环加载下的本构关系进行了探讨,并给出了低周与高周应变循环的疲劳寿命表达式。

The 45 steel natural relation of dead load with cyclic load and low frequency and high frequency strain cycling fatigue life are studied.

11. 在应变疲劳曲线上,弹性线和塑性线的交点随弹簧钢回火后硬度的升高而向低循环寿命移动;

The point of intersection of elastic line and plastic line moves toward the low cycle life with the hardness of the spring steel raised after tempering from the strain fatigue curve.WwW.WeNtiYI.coM

12. 在低循环应力时,真空环境中的疲劳断裂次数可比室温大气环境中的高近4倍。

Under lower cyclic stresses, the fatigue cycles to failure in vacuum is increased approximately 4 times than in air.

13. 提出了一个用于计算非对称循环载荷下材料低周疲劳寿命的累积损伤模型和方法。

In this paper, a method of computation for the low-cyclic fatigue life under the action of asymmetrical cyclic load is proposed.

14. 结果表明,扭转预应变降低低周疲劳寿命,循环应力随扭转预应变的增大而增大。

The results show that low cycle fatigue life is reduced and cyclic stress is raised by torsional prestrain raising.

15. 记录了各自的循环应力—应变滞后环,得出了试样的循环响应特征和各试样的高温低周疲劳寿命。

The individual cycle-strain hysteresis loops were recorded, and the cycling response and high temperature low cycle fatigue life were obtained.

16. 对调质处理的45碳索结构钢进行了应变循环低周疲劳实验以及应力控制棘轮失效实验。

The cyclic strain low cycle fatigue and cyclic stress ratcheting failure of 45 carbon steel treated by quenching and tempering were experimentally investigated.

17. 观察了低碳钢在低周冲击疲劳过程中循环形变的显微特征。结果表明:循环形变主要由滑移引起。

The micro morphology of low carbon steel cyclic deformed with low cycle impact fatigue was investigated it was found that the cycle deformation is caused by slipping.

18. 引入了概率循环应变—寿命曲线描述低周疲劳循环应变—寿命试验数据的分散性。

To model the random cyclic strain life relations during low cycle fatigue, probability based cyclic strain life curves are suggested.

19. 在低循环应力时,真空环境中的疲劳断裂次数可比室温大气环境中的多2至3倍。

Under lower cyclic stresses, the fatigue cycles to failure in vacuum is increased 2 or 3 times.

20. 室温及疲劳循环应力低、循环周次多的断口粗糙度大,纤维拔出较长;

Fracture morphology is more rough in room temperature, low fatigue stress and more fatigue cycles, but the length of fiber pullout is longer.

21. 在高低周复合疲劳研究中采用了正交试验设计的方法,并以此为基础综合研究了低周应力、高低周应力比、高周循环次数和高周循环频率对复合疲劳寿命的影响及其机理。

Based on the orthogonal test design, this paper studied the effect of low cycle stress, high-low cycle stress ratio , high cycle number and high cycle frequency on complex fatigue life.

22. 在高低周复合疲劳研究中采用了正交试验设计的方法,并以此为基础综合研究了低周应力、高低周应力比、高周循环次数和高周循环频率对复合疲劳寿命的影响及其机理。

Based on the orthogonal test design, this paper studied the effect of low cycle stress, high-low cycle stress ratio , high cycle number and high cycle frequency on complex fatigue life.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!