轴向力用英语怎么说,轴向力的英文翻译


词语导航

基本信息

词语:轴向力

繁体:軸向力

拼音:zhóu xiàng lì

英语翻译

【机】 axial force

分词翻译

轴的英语翻译:

axes; axis; shaft; spindle
【医】 ax-; ax.; axes; axio-; axis; core

向的英语翻译:

always; at; be partial to; direction; face; out; to; toward
【医】 ad-; ak-; ob-

力的英语翻译:

all one"s best; force; power; puissance; strength
【化】 force
【医】 dynamo-; ergo-; force; potency; potentia; Power; stheno-; strength; vis

翻译例句

1. 磁轴承只传递一个方向的轴向力。

Magneto bearings transmit axial forces in only one direction.

2. 得到了轴向力随流量变化的规律。

The variation laws of axial thrust with flow rate are found.

3. 同时分析了轴向力对于固有频率的影响。

Meanwhile the axis force influence on intrinsic frequency is discussed.

4. 桁架考虑轴向力效应。

Let us consider the axial forces effect of truss.

5. 可以考虑轴向力、转动惯量和剪切变形的影响。

The effect of axial force may be taken into account.

6. 轧辊间的空间交叉是产生轧辊轴向力的主要原因。

Crossing between rolls or roll and strip is one of the major reasons to emerge axial force.

7. 泵的轴向力与径向力分别由轴承盒内的滚动轴承来承受。

Pump axial force and radial force by the rolling bearing box to bear.

8. 只有在这个范围内,才能使用式(13)的轴向力计算式。

Only in this context, in order to use equation (13) of the axial force calculations.

9. 其中几何刚度矩阵由轴向力、双向弯曲和截面翘曲的影响组成。

The geometric stiffness matrix is composed by the effect of axial force, bending moment and bimoment.

10. 例如,在遇到转动力和轴向力时,可选择金字塔形突出部136。WWw.WeNTiyI.com

For example, the pyramid shaped protrusions 136 May be selected when both rotational and axial forces are encountered.

11. 本文分析了轴向力和支承运动作用下梁的参数共振和内共振问题。

The parametric resonances and internal resonances of beams with axial force and supporting motion have been investigated.

12. 这一时间点后,继续双膦酸盐治疗与骨轴向力和结构完整性降低相关。

After that point, continued treatment was associated with decreased axial strength and structural integrity.

13. 四辊轧机工作辊轴承及支承辊止推轴承失效的主要原因是轴向力过大。

The axial overload is the main factor which causes work roll bearings and back up thrust bearings of four high mill invalid.

14. 定量分析了穿孔轧制力和顶头轴向力对毛管壁厚及其横向均匀性的影响。

The influences of the separating force and axial force of the piercing point bar on the wall thickness of the shell pierced, and on its lateral uniformity are analyzed quantitatively.

15. 阐述一套大型机组轴向力在线智能监测系统硬件、软件的功能及其结构。

The functions and composition of the hardware and software of an on-line intelligent monitoring system are described.

16. 轴向力由副叶片或平衡孔平衡,对于径向力在的规格采取了双壳体设计;

Axial force is balanced by back vane or balanceable hole, for the specification with big radial force; we adopt double-wear passage design.

17. 径向力:与轴承的轴线所垂直的载荷;它和轴向力是影响轴承设计和应用的两个力。

RADIAL FORCE : The load on a bearing perpendicular to the axle, this and the Thrust load are forces that affect the design and application of bearings.

18. 采用力学分析的方法,结合测井资料,由下到上计算了抽油杆柱的扶正器间距和轴向力。

The axial load and centralizer spacing from the bottom to the top are calculated by using the mechanical analysis method and the log data.

19. 本文主要对双螺杆磨浆机的动力学参数(流率、功耗、螺杆扭矩和轴向力)进行了研究。

The paper focuses on the study of dynamics parameters that include flow rate, power consumption, torque and axis force of twin screw pulping extruder.

20. 针对水平井井眼具有一定曲率的特点,建立了抽油杆柱下部任意一点最小轴向力的计算方法。

In the light of characteristics that horizontal hole possesses a certain rate of curvature, the method of estimating minimum axial force at any point along a rod string is established.

21. 介绍了用空心液压缸对旋转部件进行轴向力加载的原理,以及空心液压缸的结构和设计问题。

The principle of loading axially on rotating assembly using hollow hydraulic cylinder, as well as the structure and design of hollow hydraulic cylinder are introduced.

22. 推力球轴承是专为支持轴向力设计的,他们用于轴向力过高,可以由径向轴承传播(的地方)。

Thrust ball bearings are designed for supporting axial forces; they are employed where axial forces are too high to be transmitted by radial bearings.

23. 对屏蔽电泵在非设计流量下工作存在较大的轴向力不平衡,造成前端轴承磨损严重进行了分析。

It is analyzed that the head bearing is heavily worn because there is a rather large axial force existing in shielded electric-pump when operating under non-designed flew.

24. 刀具磨损后仍继续使用,会加大电主轴轴向力,导致轴承受损,而且还会影响雕刻的精度及效果。

Continued to use of tool wear, spindle axial force will be increase, leading to bearing damage, but will also affect the accuracy and effectiveness of engraving.

25. 在不降低效率的情况下,在屏蔽电泵的泵头加入平衡盘使轴向力得到平衡,并取得了满意的效果。

A balance plate is put into the pump head to balance the axial force without lowering efficiency and a good effect got.

26. 采用力学分析的方法,结合井眼轨迹数据,由下到上逐跨计算了抽油杆柱的扶正器间距和轴向力。

The axial load and centralizer spacing from the bottom to the top are calculated by using the mechanical analysis method and the well trajectory data.

27. 采用力学分析的方法,结合井眼轨迹数据,由下到上逐跨计算了抽油杆柱的扶正器间距和轴向力。

The axial load and centralizer spacing from the bottom to the top are calculated by using the mechanical analysis method and the well trajectory data.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!