加工高度用英语怎么说,加工高度的英文翻译


词语导航

基本信息

词语:加工高度

繁体:加工高度

拼音:jiā gōng gāo dù

英语翻译

【化】 working height

分词翻译

加工的英语翻译:

machining; process
【化】 processing
【医】 elaborate; elaboration
【经】 extra work; process; processing; transform

高度的英语翻译:

altitude; height; high; highly; highness; stature; tallness
【计】 H
【化】 height
【医】 height; super-

翻译例句

1. 原因:尽管谷物被高度加工和损失掉绝大部分营养素和全部纤维素,但食品标签还是可以声称产品含有谷物的。

The reason: Labels can claim that products contain grains even if they \ \ \ "re highly processed and stripped of most of their nutrients and all of their fiber.

2. 以进口加工食品来取代传统食品,已导致肥胖症在太平洋岛屿居民中高度流行,并出现其他有关健康问题。

Replacing traditional foods with imported, processed food has contributed to the high prevalence of obesity and related health problems in the Pacific islands.

3. 我们正在消耗令人难以置信的真正高度加工的高热量的无菌食品,它们缺乏对微生物的基因转移至关重要的基因库。

We"re consuming a lot of really highly processed calorie-dense food that"s incredibly sterile, so they lack the microbial reservoirs for these gene transfer events.

4. 很多人从高度加工和精致的事物中无法获得这种必须的营养物资保障。

Many people in our society live on nutrient deficient diets from highly processed and refined foods that do not supply essential nutrient protection.

5. 这里有一个高度提炼,加工糖,肥胖和糖尿病,该行业内是一种天然产品。

Here"s a highly-refined, processed sugar, linked to obesity and diabetes, that the industry insists is a natural product.

6. 肉的替代物要经过高度加工,经常要耗费大量的能源来生产。

Meat substitutes were also found to be highly processed, often requiring large amounts of energy to produce.

7. 我们从再加工的计划中,知道,高度的浪费会被处理。

We, from the reprocessing plan comes the high level waste that will be disposed.

8. 这些筷子尚未完成还有待加工——在阿梅里克斯境内,若使用这种筷子吃饭,你最好另一只手里准备好一把镊子,最好还能高度耐痛。

They still need to be finished—to eat with a pair of Georgia Chopsticks right off the Americus line you would need tweezers in your other hand and a high pain tolerance.

9. 因为运输成本的下降,一些重要领域,比如肉类加工业和钢铁业才逐渐变得产业高度集中化。www.wentIYi.cOm

Key industries, including meatpacking and steel, became highly concentrated in response to the reduced cost of transportation.

10. 芹菜含有钾,镁,钠,铁,因此是非常碱化并中和酸化的食品,如肉,奶制品和高度加工的食品。

Celery has potassium, magnesium, sodium and iron and therefore is very alkalizing and neutralizes the effects of acidifying foods such as meat, dairy and highly processed foods.

11. Audacity有多种过滤器、控件以及以高度可视化方式显示多声道声音的复杂波形的功能,它是您媒体编辑器工具的一个很有价值的附加工具。

Audacity, with its great variety of filters, controls, and highly visual way of displaying the complex waveforms of multichannel sound, is a valuable addition to your Arsenal of media editors.

12. 在表面粗糙度的影响因素和影响规律方面:主要研究了残留面积高度、走刀行距、每齿进给率和最优化走刀路径对零件加工表面粗糙度的影响。

For influence factors and rules of machined surface roughness, we studied on the influence factors of machined surface roughness such as scallop-height, path interval, feed rate and optimum tool path.

13. 高度专业化的业务外包精加工就是金钱浪费。

Outsourcing all highly specialized finishing jobs is a waste of money.

14. 气泡损坏:由于不正确的加工,搬运引起的气泡损坏,以致不能经受高度的压力对产品起保护作用。

Broken bubble: bubble is broken caused by incorrect process, carrier; the broken bubble can not endure the high pressure to protect the products.

15. 研究了填料区域规划、加工区域判别以及安全填料高度的计算方法。

The methods of feed region planning, machining region distinguishing and safe feed height calculation are researched.

16. 与以往的等残留高度刀具轨迹规划方法不同的是此算法在保证刀具轨迹光顺的前提下使加工效率达到最佳。

Unlike the traditional constant scallop height tool-path planning method, it produces the optimal machining efficiency under the condition of ensuring the tool-path smoothness.

17. 刨加工表面的高度均一性较好,但斜率均一性较差。

The height distribution of the surface machined by planing is homogeneous, but the slope distribution is not.

18. 提出了一种四坐标联动等残留高度端铣加工任意曲面叶片的方法。

A flat-end cutter was used, its paths were generated based on the constant scallop height principle and machining strips were enlarged by adjusting inclinati.

19. 针对高速研磨加工中使用的弯曲成型法非球面磨具的变形特点,分析了磨具在弯矩作用下产生的弯曲变形,指出磨具高度对磨具成形误差影响较大,磨具宽度对其影响较小。

The bending deformation of the aspherical bending lapping tool under the action of bending moment was analyzed according to its deformation feature in high speed lapping process.

20. 随着外加脉冲偏压的增大、脉冲时间的增加,加工得到的点状纳米结构的高度和半径会随之增加。

It is concluded that the height and the radius of nanostructures increase with the raising of the applied voltage and the pulse time.

21. 通过采用一套能自动进行加工、检测、装卸、运输的机器设备,组成高度连续的、完全自动化的生产线,来实现产品的生产。

Automatically by using a set of processing, testing, handling, transport equipment, composed of highly continuous, fully automated production lines, to achieve production.

22. 角钢及丁字钢,除热轧、热拉拔或热挤压外未经进一步加工,截面高度在80毫米及以上。

L or t sections, not further worked than hot - rolled, hot-drawn or extruded, of a height of 80mm or more.

23. PY P公司自成立以来,双方股东给予了高度重视和支持,共同着眼于建立世界一流的管加工厂。

PYP Corporation since had been established, the shareholders namely gave have taken highly with the support, focused together on the establishment first-class manufacture workshop of the world.

24. 切削力回归方程与实验高度符合,运用该回归方程作出的响应曲面有助于合理选择铝衬微波印制板高速铣削加工切削参数。

The regression equation of cutting force meets the experiment result very well, the response curved face derived from the regression equation can help to choose proper high-speed cutting parameters.

25. 当模具大小和高度不同时,可根据情况而定调整机头行程。可以节省人力负荷加工产品准确度可达98%。

When the dimension of the mode is different from its height, it is allowable to adjust head piece stroke according to circumstances, which saves up 98% labor-saved loading converted products accuracy.

26. 双语对齐作为语料库加工过程中的关键技术,已经引起研究者的高度重视。

As the key technology during the course of building the corpus, Bilingual alignment technology is growing High recognition.

27. 因此,集高强、保温隔热、质轻、可加工性强等优点为一体的加气混凝土受到了人们的高度关注。

Therefore, Aerated concrete as a kind of lightweight wall material received attention for its unique combination of superior strength, lightweight, heat insulation and processability.

28. 本文通过对电火花线切割加工工艺规律的分析,选取影响工艺效果的主要因素:工件厚度、脉冲宽度、脉冲间隔、脉冲高度,作为输入向量。

By analyzing the law of WEDM processing, this article selects the main factors affecting process: the thickness of the work-piece, pulse width, pulse interval, pulse height, as the input vectors.

29. 本文通过对电火花线切割加工工艺规律的分析,选取影响工艺效果的主要因素:工件厚度、脉冲宽度、脉冲间隔、脉冲高度,作为输入向量。

By analyzing the law of WEDM processing, this article selects the main factors affecting process: the thickness of the work-piece, pulse width, pulse interval, pulse height, as the input vectors.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!