
词语导航
基本信息
词语:挤出速率
繁体:擠出速率
拼音:jǐ chū sù shuài
英语翻译
【化】 rate of extrusion
分词翻译
挤出的英语翻译:WWw.weNTIyi.coM
extrude; extrusion; pile out; squeeze out; wangle
【化】 expression; extrusion; extrusion molding; extrusion moulding
【医】 extrude; milking
速率的英语翻译:
rate; speed; tempo; velocity
【化】 rate; speed
【医】 speed; velocity
翻译例句
1. 本级支持与厚壁产品的高挤出速率。
This grade enables high extrusion rates with thick-walled product.
2. 并对凝固浴浓度和温度、挤出速率、芯液流量等纺丝工艺条件进行了探讨。
Several spinning procedure conditions were discussed, such as coagulation bath concentration, temperature, extruding rate and core layer liquid flow rate etc.
3. 网络的输入包括:挤出机温度、喷头温度、熔融体挤出速率、空气流率及接收距离。
The network inputs include extruder temperature, die temperature, melt flow rate, air flow rate, die to-collector distance.
4. 熔纺时控制了挤出流量和牵伸速率的良好匹配,获得了丝径均匀的大直径中间相沥青炭单丝。
The large diameter mesophase pitch carbon monofiber in uniform size was obtained by controlling the matching of extrusion flow and drawing rate.
5. 在聚合反应挤出过程中,化学热效应显著影响材料体系温度,从而影响反应速率以及高分子材料结构与流变性能。
The chemical calorific effect has a great influence on the temperature, the reaction rate, the polymer material structure and rheological property in reactive extrusion processes for polymerization.
6. 分析了狭缝口型中的一维复合共挤出流动,叠代计算得到两相界面位置以及速度、剪切速率和切应力的分布。
The interface between two molten polymers, as well as the distribution of flow rate, shear rate and shear stress were obtained by using an iterative calculating scheme .
7. 研究了PVC材料通过矩形口模挤出时,口模的几何参数和剪切速率对离模膨胀的影响,并从理论上分析了其特征规律。
The effects of geometrical parameters of die and shear rates on the die swell of PVC extruded through rectangular die were discussed, and the special rules were also analyses theoretically.
8. 利用该仪器可以测量聚合物在稳态和动态挤出过程中的流动速率、压力降、离模膨胀和表观粘度等。
The flow rate, pressure drop, die swelling and apparent viscosity in dynamic and static extrusion can be measured by using this equipment.
9. 较低的分子量和较高的温度有利于提高临界剪切速率,改善挤出物外观质量和降低熔体粘度。
Moreover, the low molecular weight and higher temperature are favorable to reduce the melt viscosity, to increase the critical shear rate and to improve the apparent quality of extrudates.
10. 计算结果表明:牵引速率对密封条的挤出形状有很大的影响。
It was expected that drawing speed obviously influenced the sectional shape of products.
11. 本课题以三角形排列的三螺杆挤出机三维流场为研究目标,研究内容包括速度场、压力场、剪切速率场等。
The three dimension flow field in the triple-screw extruder with triangle configuration is the research objects, including velocity field, pressure field and shear rate field etc.
12. 测试不同储存时间下的硅烷接枝聚乙烯的熔体流动速率和硅烷交联聚乙烯电缆料在挤出机中停留不同时间后挤出物的表面状况、凝胶含量等。
By testing the MFR of silane grafted PE with different preservation time, and the surface condition and the gel content of the silane grafted extrudates with different retention time in extruder.
13. 适当增加流道的长度,可以减小胶料出口处的速度场、剪切速率场的集中程度并使之趋于均匀,能够有效降低挤出胀大和模外熔体偏转流动现象。
The velocity field and shear rate distribution are reduced and uniform along with the proper increase of slip length. The die swell and the interface deflexion phenomenon will be reduced effectively.
14. 选用熔融纺丝法制备PDLLA/HA复合纤维,探索了熔融纺丝过程中温度、挤出机转速、拉伸速率、加料速度和冷却速率等一系列工艺参数的选择及其影响因素。
PDLLA/HA composite fibers were produced by melt spinning, and the choices of the process parameters such as temperature, revolving speed and drawing speed etc were discussed.
15. 这种档次的SantopreneTPV是剪切速率依赖型产品,可在常规热塑性注塑,挤出,吹塑,热成型或真空成型设备上加工。
This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection molding, extrusion, blow molding, thermoforming or vacuum forming.
16. 首次提出了聚合物材料熔融过程的两相柱团、固相高度变化函数及液相增长速率的概念,较为真实地刻画了聚合物在同向旋转双螺杆挤出中非充满螺槽的熔融行为。
Some new concepts are proposed, such as two phases column group of solid and melt of channels filled partially, the function of solid height which are different from t…
17. 首次提出了聚合物材料熔融过程的两相柱团、固相高度变化函数及液相增长速率的概念,较为真实地刻画了聚合物在同向旋转双螺杆挤出中非充满螺槽的熔融行为。
Some new concepts are proposed, such as two phases column group of solid and melt of channels filled partially, the function of solid height which are different from t…
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
