滚齿用英语怎么说,滚齿的英文翻译


词语导航

基本信息

词语:滚齿

繁体:滾齒

拼音:gǔn chǐ

英语翻译

【机】 hobbing

分词翻译

滚的英语翻译:

roll; trundle
【医】 rolling

齿的英语翻译:

tooth; tine
【医】 dens; dent-; dentes; denti-; dento-; odont-; odonto-

翻译例句

1. 环纹滚刀可以实现高效率的径向进给滚齿加工。

The ring teeth hob can realize high efficient radialfeedhobbing.

2. 本文是“滚齿加工误差分析与检验组”一文的第一部分。

This paper is the first part of the machining error analyses and check groups of gear- hobbing.

3. 介绍了一种可用在通用万能铣床上进行齿轮展成法加工的自动滚齿装置。

The paper introduces a kind of automatic cutting equipment which can use generating method to process gears on the universal miller.

4. 介绍剃齿刀、插齿刀、滚齿刀的微机设计和校验计算程序的编制及其应用。

Introduces the composition and application of a microcomputer pro-gram used for designing and calculation checking of gear shaver, shaper cutter and hob-ber.Www.wENtIYI.cOm

5. 本文阐述了滚刀滚齿时齿轮齿根过渡曲线的延长渐开线的等距线与齿轮齿形渐开线的关系。

This paper discussed the relationship between the involute pitch of tooth root and tooth profile involute in hobbing.

6. 精选高精度同心滚齿钢轮铜乡里撕膜,具有不易打滑、不易脱齿、不易变形、超长无间距特点。

High precise concentric gear and steel roller for removing film, which can avoid skid, distortion and clearance.

7. 精选高精度同心滚齿钢轮铜乡里撕膜,具有不易打滑、不易脱齿、不易变形、超长无间距特点。

High precise concentric gear steel roller for removing film, which can avoid skid, distortion clearance.

8. 这对于提高滚齿的加工精度、特别是利用目前较热门的数控补偿的方法减小加工误差有着重要的理论和实际意义。

It is very important to improve the gear accuracy, and is effective to decrease machining error by the pop NC compensation technology.

9. 实验结果表明,采用这里提出的滚齿加工误差综合补偿方案可使被加工齿轮的运动精度提高2 ~4级,工作平稳性精度提高1 ~3级。

It is proved with experiments that the motion accuracy of machined gear is enhanced for 2 ~ 4 grades, the smooth accuracy is enhanced for 1 ~ 3 grades.

10. 本文在建立滚齿过程数学模型的基础上,求出实际方程,在计算机上对实际滚齿过程和齿形检测过程进行了仿真,并对齿形轮廓和齿形误差进行了分析。

The mathematical model in agreement with the practical generating process is established. The practical generating process and the testing process of gear shape are simulated by use of computer.

11. 应用齿顶整圆弧滚刀是提高齿轮弯曲疲劳强度的有效措施之一。

Full radius hob on tooth tip is one of the effective measures by increasing gear tooth bending strength.

12. 在研究滚刀加工不同齿数带轮所形成的误差分布规律及误差对带与轮啮合传动影响的基础上,确定了滚刀可加工的齿数范围与参数。

At the basis of distribution law of error formed by the processed pulley with various teeth and its effect on transmission, the scope of tooth of pulley processed is defined.

13. 分析了滚刀齿高和齿顶倒圆半径对所切齿轮齿根弯曲应力的影响。

And it analyzed that hob tooth height and tooth top pour round radius impacted on gear tooth root crooked stress.

14. 本文研究了一种新型行星传动——滚锥齿超环面行星蜗杆传动。

The paper researches a new type mechanical transmission mechanism-the Rolling cone-type toroidal drive.

15. 该系统可优化滚刀设计参数,自动校核齿背铲磨,实现齿轮刀具快速可靠的设计。

This system can optimize the parameter of gears, check relief grinding of tooth back automatically and design the gear hobs rapidly and reliably.

16. 介绍了硬齿面滚刀倒棱的齿形计算公式和误差分析,探讨了新型的倒棱滚刀结构方式及制造工艺。

Profile formula for hard gear chamfered edge hob and its error analysis are introduced. A new kind of chamfered edge hob structure and manufacturing engineering are investigated.

17. 滚刀、插齿刀设计成较大的修缘角,有利于提高啮合质量。

Designing of external gear shaper cutter with large tip relief Angle can improve the meshing quality.

18. 在应用无差动法滚切斜齿圆柱齿轮的基础上,通过理论推导和实验验证,得出进一步减少斜齿轮齿向误差的可行的挂轮选配新方法。

Through theoretical derivation and experimental verification, a new method is obtained for further reducing tooth curve error of oblique gear and for choosing feed gear wheel.

19. 在齿轮热滚挤加工中,轮齿上的金属在强制挤压力的作用下沿齿面产生塑性流动,使齿形发生变化。

During ausform finishing process of hardened gears, there is plastic displacement of metal on the tooth surface and the distortion of tooth profile.

20. 当前,齿顶整圆弧滚刀广泛应用于重型汽车变速器齿轮的生产中。

At present, full radius hob is used extensively for heavy transmission gear production.

21. 介绍了齿顶整圆弧滚刀的应用和设计。

This paper introduces application and design of full radius hob on tooth tip.

22. 介招了带轮滚刀(梯形齿)的齿形计算公式。

In this paper, the calculating formula of profile of belt wheel gear hob cutter was introduced.

23. 如果以齿纹中点法剖面作为齿形检测和设计剖面,用平面啮合法设计花键滚刀时,则齿形误差最小。

If the normal section in the center of the tooth line is taken as a tooth measuring and design section, when spline hob is designed in a plane meshing, the tooth profile error is minimum.

24. 按照此法计算,可使滚刀齿廓上的计算点均匀分布,提高滚刀的设计精度。这种方法可应用于类似的刀具设计中。

With this method, the calculated points distribution of the tooth outline are uniform, thus the design accuracy is increased remarkably.

25. 指出通过计算作出图形,可分析出滚刀齿顶圆弧的设计是否合理。

It pointed out that the design of gear cutter should greatly increase the tooth point arc so as to reduce the stress concentration to increase the force of tooth root.

26. 指出通过计算作出图形,可分析出滚刀齿顶圆弧的设计是否合理。

It pointed out that the design of gear cutter should greatly increase the tooth point arc so as to reduce the stress concentration to increase the force of tooth root.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!