
词语导航
基本信息
词语:轮廓机构
繁体:輪廓機構
拼音:lún kuò jī gòu
英语翻译
【机】 profiling mechanism
分词翻译
轮廓的英语翻译:
outline; contour; lineament; profile; adumbration; schema
【计】 contour; outline
【医】 contour; outline
机构的英语翻译:
institution; organization; framework; house; machine; mechanism; organ; outfit
setup; wheel
【化】 mechanism
【医】 institution; mechanism; organizationwWW.WenTIyI.CoM
翻译例句
1. 在触针式轮廓测量仪中,性能优良的测量机构是保证触针与被测表面之间“接触测量”的关键部件。
In the stylus profilometer, a measuring mechanism with good performance is the key component, which guarantees "contact measuring" between the stylus and the surface of specimen.
2. 运用相关函数法研究了凸轮廓线误差对凸轮机构从动件动力精度的影响,并给出了动力精度的求解方法。
The influence of errors of cam profiles on the dynamic accuracy of cam mechanism is studied using the correlation function method, and a calculation means of dynamic accuracy is given.
3. 介绍一种确定平行分度凸轮机构凸轮轮廓的有效设计思路和分析方法。
A kind of effective thought of design and method of analysis for determining the CAM profile of parallel indexing CAM mechanism was introduced.
4. 介绍了圆锥滚子蜗杆凸轮机构的轮廓曲面方程的建立、压力角和啮合曲面法曲率的计算过程。
This paper describes the establishing process of the equation of working profile curved surface of worm CAM mechanism, the calculation of its pressure Angle and normal curvature.
5. 利用凸轮机构的分析理论,获得了加工DD680系列汽车制动凸轮的轮廓曲线方程和加工该靠模凸轮的刀具中心轨迹方程。
The profile equation of brake cam of DD680 series motor vehicles and tool path equation for processing copying cam have been obtained by using analytical theory of cam mechanism.
6. 它不仅影响机构的压力角,而且还影响其轮廓曲线的曲率半径。
It influences not only the pressure Angle of mechanism, but also the curvature of earn contoUrs.
7. 它是一份专心制作的个人、机构、公司、产品或服务的个性轮廓图。
It is a studiously crafted personality profile of an individual institution corporation product or service.
8. 本文着重对引进采煤机无链牵引机构的链轨截面轮廓进行分析,并对其受力进行较深入的研究。
The paper mainly analyses the chain track sectional profile of non chain drive mechanism of an importing miming machine and researches on its stress state deeply.
9. 利用NURBS实现了凸轮轮廓曲线的重构,并给出基于运动仿真实现迅速反求空间凸轮机构从动件运动规律的方法。
The CAM contour curves are reconstructed by NURBS, and a rapid reverse design method for spatial CAM follower motion specification via motion simulation is also studied.
10. 提出了双作用式平行分度凸轮机构,并按研究齿轮啮合的方法研究其凸轮廓线。
This paper proposes double action parallel indexing CAM mechanism, and studies cams profile by methods used in gear meshing.
11. 本文就这种新型凸轮机构的理论基础与凸轮轮廓曲线的设计步骤进行了详细论述。
The theoretical base of the new cam mechanism and the designing steps of the cam contour are discussed.
12. 针对凸轮廓线导引型汽车滑动天窗机构的运动简图,推导了其主要运动参数的公式。
According to the kinematic sketch of CAM profile guiding type automotive sliding sunroof mechanism, the formulae of its major kinematic parameters are derived.
13. 利用坐标变换的方法得到的凸轮轮廓线可为凸轮机构的动力学仿真和数控加工编程提供依据。
The cam contour curve was obtained through coordinate transformation method. It offers references for dynamic simulation and the programming of numerical-control machining for cam mechanism.
14. 以啮合理论为基础,导出了蜗式凸轮机构从动件(即分度转盘)在凸轮实际轮廓和实际机构尺寸诸因素的影响下,分度误差的计算公式。
Based on meshing theory, a formula is derived for calculating index error of worm-type CAM follower (i. e. Tindex plate) under influence of actual worm-type CAM profile and dimensions.
15. 本文应用三次样条函数建立凸轮廓线方程,并进行机构的运动和动力分析。
The formulas of CAM profile are established through the use of spline function and a method is given for kinematic and dynamic analysis of the cams in this article.
16. 利用支持向量机构造的支持向量值轮廓波变换是一种具有多尺度、多方向和平移不变性的图像表达方法。
Support vector value contourlet transform, which is constructed by support vector machine, is a new kind of image representations which is of multi-scale, multi-direction and shift-invariance.
17. 推导出适合打纬共轭凸轮机构的双简谐运动规律和共轭凸轮廓线的坐标方程。
The double simple harmonic motion of the tightening weft cams follower and the mathematical equations of the CAM were established.
18. 针对平底从动件盘形凸轮机构,导出了同时适用于直动和摆动从动件的凸轮廓线综合公式及凸轮实廓外凸的条件式。
And then expounded that these equations are the general synthetic equations suitable at the same time for plate CAM mechanisms with straight moving or oscillating followers.
19. 它是一份用心制作的个人、机构、公司、产品或服务的个性轮廓图。
It is a studiously crafted personality profile of an individual, institution, corporation, product or service.
20. 通过对拨杆受力情况的分析,指出拨杆工作表面轮廓应为凹渐开线,并对设计含有这类拨杆件的机构提出了建议。
In this paper, the contour of the shifter lever is defined with the analysis of the force between the shifter lever and the driven part.
21. 它的轮廓线形状及廓形制造误差会直接影响递纸机构的工作性能。
The profile shape and profile errors of the cam will directly affect the sheet transfer mechanism performance that it is necessary to study.
22. 应用该方法导出了四种不同类型凸轮机构的凸轮廓线的解析表达式,并给出了对应的设计实例。
The formulae of designing the cam profiles for the four different types of cam-follower systems are derived using the proposed relative v…
23. 应用该方法导出了四种不同类型凸轮机构的凸轮廓线的解析表达式,并给出了对应的设计实例。
The formulae of designing the cam profiles for the four different types of cam-follower systems are derived using the proposed relative velocity method$…
24. 应用该方法导出了四种不同类型凸轮机构的凸轮廓线的解析表达式,并给出了对应的设计实例。
The formulae of designing the cam profiles for the four different types of cam-follower systems are derived using the proposed relative velocity method$…
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
