机械计算系统用英语怎么说，机械计算系统的英文翻译

词语导航

基本信息

词语：机械计算系统

繁体：機械計算系統

拼音：jī xiè jì suàn xì tǒng

英语翻译

【计】 mechanical computing systemwWW.wentiYI.CoM

分词翻译

机械的英语翻译：

engine; machine; machinery; mechanism
【化】 machine; machinery
【医】 mechano-
【经】 machine

计算系统的英语翻译：

【计】 computational system

翻译例句

1. 近期，我在读一本书，书中把患自闭症谱系障碍的人描述成系统指向的、机械倾向的、擅长操作机械和计算机，但不能进行创造性思考。

Recently, I was reading a book that described people with autism spectrum disorders as systems-oriented, mechanically inclined, good with machines and computers, and unable to think creatively.

2. 当然，有时这是真的：有些自闭症患者的确极为擅长机械、计算机和系统——而且创造性表达特烂。

Of course, this is true some of the time: some people with autism are indeed terrific with machines, computers and systems - and rotten at creative expression.

3. 然而，我儿子对系统、机械和计算机的兴趣不大——但是他很喜欢写诗、编故事、用竖笛即兴创作。

On the other hand, however, my son has little interest in systems, machines and computers - but enjoys writing poetry, making up stories, and improvising on the clarinet.

4. 机械飞行控制系统已经被主动式电传飞行控制系统所取代，电传系统通过计算机来响应飞行员的操作指令，使操作更安全有效。

Mechanical systems have been replaced with electrically activated fly-by-wire controls that use computers to interpret the pilot"s commands in the safest and most efficient way.

5. 当我们改进芯片和自动机械装置时，我们没有理由相信，在将来某个时候计算机会完整地设计其他计算机，一些自动机械系统会完整地制造其他自动机械系统。

As we improve chips and robots, there is no reason to believe that at some point computers will wholly design some other computers, and some robotic systems wholly manufacture other robotic systems.

6. 计算机科学家们除了和设备打交道外，还要和机械工程师、系统集成师以及应用程序的相关人员一起工作。

The computer scientists were working alongside device and mechanical engineers, system integrators, and people who work on applications.

7. 为满足补风需要，设机械加压送风系统，送风量按不小于排烟量的50%计算。

To satisfy the demands for air supplement, mechanical pressurized air supply system is set. Air supply level is calculated by no less than 50% of smoke exhaust level.

8. 由于传统理论计算密封性能参数的精度有限，因此迫切需要一套科学系统的机械密封性能计算模型。

Because the parameter on sealing performance was difficult to calculate accurately by traditional theory, so the system model of calculating mechanical sealing performance was needed urgently.

9. 从零件失效相关结构角度，提出机械系统相关性可靠度计算研究的新理论方法。

For the correlation structure existed in the failure modes of components, we present a new theoretical method for reliability calculation involving correlation in mechanical systems.

10. 通过分析预载电压和扫频信号幅值对静电负刚度的影响，提出了从系统刚度中分离出挠性梁机械刚度的计算方法。

After analyzed the effect of preload voltage and sweep voltage on the negative electrostatic spring stiffness, a method to dissociate mechanical stiffness from the system stiffness has been provided.

11. 建立调速型液力偶合器力矩特性数学模型是分析和计算机械系统动态响应的关键。

Establishment of torque mathematic model for a variable speed turbo coupling is the key for analysis and calculation of system dynamic response.

12. 介绍所研制计算机辅助动态设计系统（CADD）的硬件配置与软件开发，并以工程机械中应用实例说明。

The hard ware configuration and soft ware development of the proposed computeraided-dynamic-design system (CADD) are introduced, along with application examples in construction machinery.

13. 详细介绍了油管接箍内螺纹计算机辅助测量系统的机械、软硬件结构与原理。

This paper discusses the mechanical, hardware, software configurations and principles of CAT system for joint internal thread in details.

14. 介绍了新型高参数釜用机械密封试验装置的结构、技术参数、主要特点、设计与计算及试验系统等。

The structure, technical parameters, main feature, design&calculation and test auxiliary system and so on of new and high-performance test device for mechanical seals for agitators were introduced.

15. 为了使机械零件材料的选择更加科学合理，设计了一种利用计算机进行辅助选材的专家系统。

For the more reasonable in selection of mechanical parts materials, the author designs an expert system of computer aided selection for parts materials.

16. 本文应用振动测试技术、转速测试技术以及计算机技术等构成了一套可用于工程机械变速箱的故障诊断系统。

A completed set of trouble diagnosis system for transmission in construction machinery using vibration measurement, rotating speed measurement, and computer technology is introduced in this paper.

17. 微型飞行器是集航空设计、航空制造、微机械、电子、高性能数字计算机于一体的多学科交叉的综合系统。

Micro air vehicle is a multidisciplinary system which integrates the technologies of aeronautical design, aeronautical manufacture, micro machinery, electronics and high capability digital computer.

18. 本文提出将实物仿真与计算机仿真相结合，建立基于实验数据的机械系统动力学模型，研究了对系统动力学模型的修正方法。

This paper gives out the model of mechanical system dynamics and builds the correcting method for system dynamics model, which is based on the obtained data and computer simulations.

19. 本文介绍了计算机辅助机械设备合理更新的决策系统的基本思想、系统结构和基本功能。

The basic ideas and functions of a computer-aided decision System for renewal of machinery equipment are introduced.

20. 光盘存储设备的伺服系统是精密机械和计算机控制的结合，集合了激光测量及定位跟踪、DSP应用等高新技术。

Servo system of the compact disc storage device is the combination of fine machine and computer control, gathering high tech such as laser measure or tracking position and DSP application.

21. 建立了由电气比例阀、位移传感器、数据采集模块及计算机等组成的机械压力机智能控制系统。

A new intelligent control system primarily composed of electric proportional valve, displacement transducer, data acquisition and process module is constructed.

22. 介绍了四杆机构、凸轮机构、齿轮机构等常用机械计算机动态模拟系统的设计思想、功能和特点。

The design philosophy, functions and characteristics of dynamic simulation system of common mechanism such as four bar linkage, CAM, gear are introduced and some key technical issues solved.

23. 从分形原理出发，提出了非线性机械设备系统信号的分形计算维数的概念。

In the paper, fractal calculating dimension, which is based on fractal theory, is put forwards.

24. 介绍了一种液压-机械复合传动系统的工作原理，给出了其力学计算公式。

The working principle of compound drive system of fluid power and mechanics is introduced. Its mechanics calculating formulae of force are given out.

25. 介绍一种回转窑机械运行状态计算机在线监测系统的设计与应用。

This paper describes the design and application of supervision of mechanic parameters on rotary kiln.

26. 试验台由机械部分、电气部分和计算机测控系统组成。

It is composed of mechanical part, electrical part and computer detection and control system.

27. 试验台由机械部分、电气部分和计算机测控系统组成。

It is composed of mechanical part, electrical part and computer detection and control system.