化学抛光用英语怎么说,化学抛光的英文翻译


词语导航

基本信息

词语:化学抛光

繁体:化學拋光

拼音:huà xué pāo guāng

英语翻译

【计】 chemical polishing
【化】 chemical polishing

分词翻译

化学的英语翻译:

chemistry
【化】 chemistry
【医】 chemistry; chemo-; spagyric medicine

抛光的英语翻译:

polishing
【计】 burnishing; lap joint; lapping
【化】 burnish(ing); polishing

翻译例句

1. 将铸钛修复体的化学抛光方法应用于临床。

At last the clinical use of chemical polishing method was tried.

2. 机械化学抛光;磨粒;建模;芯片;

Chemical Mechanical Polishing(CMP); abrasive particle; modeling; wafer;

3. 研究了不锈钢在低温条件下的化学抛光工艺。

This paper studies the technology of stainless steel chemical polishing under low temperature and introduces the functions of partial components in polishing solution.

4. 本文研究了不锈钢室温化学抛光液的组成和工艺参数。

The solution composition and technological parameters of chemical polishing of stainless steel at room temperature were studied.

5. 结论:纯钛铸件的化学抛光法具有临床应用和推广价值。

Conclusion: The chemical polishing of titanium has a clinical applying value, and is worth of spread.

6. 研究了不锈钢模具板的化学蚀刻、化学抛光和电镀铬工艺。

The technics of chemical etching, chemical polishing and chromium electroplating for stainless steel mould were studied.

7. 主要研究了适合铝及铝合金的碱性化学抛光液及抛光工艺。

This paper focuses on the study of the solution and process for alkaline chemical polishing aluminum and its alloy.

8. 介绍了该工艺的流程、规范,以及化学抛光原理及影响因素。

The flow and specifications of the process, polishing principles and affecting factors were introduced.

9. 必须先做除锈及去氧化膜处理,一般使用化学抛光或电解抛光。

Must do derusting and to oxidation film processing, generally use chemical polishing or electrolytic polishing.

10. 不锈钢拉伸工件采用常规的化学抛光工艺不能达到理想的效果。

Satisfactory polishing surface cannot be obtained on stretched stainless steel parts by traditional electroless polishing process.

11. 对银铜钎料化学抛光的工艺参数和抛光液组分进行了系列实验。

A series of experiments have been carried out on the technological parameters of Ag-Cu alloy electrolytic polishing and on the polishing liquid compositions.

12. 该工艺可以用于各种类型不锈钢的化学蚀刻、化学抛光和电镀铬处理。

The technics can been applied to surface treatment of chemical etching, chemical polishing and chromium electroplating for different kinds of stainless steel.

13. 探讨了机械抛光、化学抛光和光抛光等不同表面处理方法对电极特性的影响。

The affections of different surface treatments by mechanical polishing, chemical etching and photoetching to the properties of electrodes have also been discussed.

14. 不锈钢化学抛光处理过程中往往会产生严重污染环境和危害人体健康的气体。

In the process of stainless steel polishing, some poisonous gases, which may seriously pollute the environment and harm the human health will always emit.

15. 铝件在电解氧化前往往需要进行化学抛光处理,以增加其表面光洁度和光亮度。

The aluminum often needs to carry on chemical polishing processing before the electrolytic oxidation, increases its surface smooth finish and the radiance.wWW.weNTiyi.com

16. 本文研究了用机械抛光、化学抛光和氢还原法处理轴承钢表面对测定氧的影响。

In this paper mechanical polishing; Chemical polishing and hydrogen reduction methods used im cleaning bearing steel surface for oxygen determination have been studied.

17. 分析了铝的电化学抛光研究现状,通过实验获得了一种效果好的环保型抛光工艺。

The current research of aluminums electro-polishing was analysed, a long-life and good-effective non-pollution technology was obtained through experiments.

18. 针对常规不锈钢化学抛光剂的缺点,研制出了一种高性能环保不锈钢化学抛光剂配方。

According to the faults of common stainless steel chemical polishing agent, a formulation of green chemical polishing agent for stainless steel with high performance was studied.

19. 使用机械 -化学抛光法加工大尺寸单晶硅可获超光滑表面 ,但很难保证良好的面型。

In Chemical-Mechanical polishing experiments we produced optical quality super smooth surfaces on single-crystal silicon, but cannot insure the surface figure.

20. 开发出了弱碱性溶液中紫铜化学抛光新工艺,确定了抛光液中的光亮剂(包括缓蚀剂和表面活性剂)。

A new technology for chemical polishing of copper in weak alkaline solution has been developed and a brightener (containing corrosion inhibitor and surfactant) has been found out.

21. 为了提高铜及其合金的表面抗变色能力,研制了一种环保的化学抛光工艺和含稀土盐的新型钝化工艺。

An environmentally-friendly chemical polishing and passivation process was established for copper and its alloys, using a rare earth salt in the passivation solution.

22. 结果表明,黄铜的化学抛光包括浸蚀、光亮和过腐蚀三个阶段,同时对黄铜化学抛光机理也进行了探讨。

Experimental results show that the polishing process includes the steps of etching, brightening and over-etching. The mechanism are also discussed.

23. 分析了功率超声波对电化学抛光过程的促进作用及电流密度对抛光效果的影响,获得了较为合理的工艺参数。

The promotion effect of intensity ultrasonic wave on electropolishing process and the influence of ultrasonic wave on polishing quality were analyzed, and better processing parameters were obtained.

24. 介绍餐具光亮镀银的全套实用工艺,包括化学抛光、机械抛光、除蜡、除油、镀镍、镀银、以及镀后处理等。

A complete bright silver plating process for deluxe tableware including chemical polishing, mechanical polishing, degreasing, cleaning, nickle plating, silver plating and post-treatment is suggested.

25. 测定了化学抛光过程中紫铜的表面光反射率、失重、表面形貌和电位随时间的变化以及抛光过程的电流-电位曲线。

Changes in specular reflectivity, weight loss, surface topograph and potential with time and current-potential curves during chemical polishing were determined.

26. 用途:用作玻璃蚀刻剂,金属表面的化学抛光剂、酿酒的消毒剂,防腐剂,纤维的媒染剂,也用于提取稀有元素等。

Uses: used as glass etching agent, metal surface of the chemical polishing agent, wine of the disinfectant, preservative, mordant the fiber is also used for extraction of rare elements and so on.

27. 试验表明,采用此工艺来抛光铝材获得的综合效果优于酸性电化学抛光和传统碱性电化学抛光,是一项有应用前景的新工艺。

Results showed that the polishing effect was improved in alkaline bath with PEG as brightener, and the use time of bath was prolonged with sodium tartrate as stabilizer.

28. 在实验研究的基础上,分析了脉冲电化学抛光加工的机理,提出的影响脉冲电化学抛光加工的主要因素,并对其进行了研究和探讨。

Based on experiment, the mechanism for pulse electrochemical polishing is analyzed and the main factors that affect the machining are proposed, and a research and discussion are made on the machining.

29. 在实验研究的基础上,分析了脉冲电化学抛光加工的机理,提出的影响脉冲电化学抛光加工的主要因素,并对其进行了研究和探讨。

Based on experiment, the mechanism for pulse electrochemical polishing is analyzed and the main factors that affect the machining are proposed, and a research and discussion are made on the machining.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!