膨胀机用英语怎么说，膨胀机的英文翻译

词语导航

基本信息

词语：膨胀机

繁体：膨脹機

拼音：péng zhàng jī

英语翻译

【化】 expander; expansion engine; expansion machine

分词翻译

膨胀的英语翻译：

expand; swell; bulge; dilate; inflate
【计】 dilatation
【化】 expansion; inflation; swelling
【医】 distention; ectasia; ectasis; ectasy; expansion; inflation; physiosis
swelling
【经】 expansion

机的英语翻译：

chance; crucial point; engine; machine; occasion; organic; pivot; plane
flexible
【医】 machine

翻译例句

1. 膨胀机为进气有阀、排气无阀的短活塞型。

The expansion engine which has a inlet valve without exhaust valve, is a short piston engine.

2. 透平式膨胀机和节流阀之间的膨胀有什么不同。

What is the difference expansion between turbine expander and valve throttle ?

3. 膨胀机允许带液量的大小，主要取决于自身的内部结构。

The size of the permitted quantity carried out from expansion machine mainly depends on its internal structure.

4. 本文重点探讨了膨胀机出口带液量对其等熵效率的影响。

The influence of liquid quantity carried out from the exit of expansion machine upon its isentropic efficiency is emphatically discussed in this paper.

5. 试验表明，该空气轴承中压透平膨胀机的性能是优良的。

The experiments have shown that the performance of this air bearing turbine is excellent.

6. 本文利用熵法对涡流管、透平膨胀机及节流阀三种装置进行了研究。

In this paper, a method of entropy has been used to investigate vortex tube, throttle valve and expansion turbine.

7. 研究CO2转子膨胀机内高低压间泄漏问题是提高膨胀机效率的途径之一。

Study of leakage between high pressure and low pressure in CO2 rotary expander is important for improving the efficiency of expander.

8. 利用该模型，对在快速压缩膨胀机中模拟的沼气发动机燃烧过程进行了模拟计算。

The model was used in making calculation simulation for combustion processes in biogas ignition engine, which was obtained in a rapid compression expansion machine.

9. 利用该模型，对在快速压缩膨胀机中模拟的沼气发动机燃烧过程进行了模拟计算。

The model was used in making calculation simulation for combustion processes in biogas ignition engine, which was obtained in a rapid compression expansion machine. The calculation r...

10. 实际应用显示，通过应用该实验台可有效地掌握透平膨胀机气体轴承的多方面性能。

The application shows that through using the rig the performance of gas bearings for turboexpanders can be mastered completely.wwW.WenTIyI.COm

11. 分析了用靠模法加工轴流压缩机叶片及能量回收透平膨胀机叶片时产生误差的原因。

Reason of error generated when axial compressor and TRT blades processed by profiling is analyzed.

12. 计算结果表明，摆动转子膨胀机结构上有优势，承压能力很好，适于在高压差下工作。

The result of computation shows that the swinging rotor expander has the advantages on its structure, a good compression bearing ability and is more suitable to work under high-pressure difference.

13. 结果表明，气体冷却器出口温度、过热度和膨胀机效率对最优高压压力的影响较为明显。

It is illustrated that discharge temperature of gas cooler, efficiency of expander and degree of superheat at the inlet of compressor can exert more influence on the optimum high pressure.

14. 采用四轴联动数控铣床及自行设计的指状铣刀和数控程序，对膨胀机叶轮进行光整加工。

Four shafts linkage NC milling machine is used for polishing impeller of an expending machine, which finger - like milling cutter and NC system is designed.

15. 由于膨胀机碳环密封后面的密封垫片在安装时未被充分压紧，使膨胀机机体及相应管道进油。

At installation, insufficient compression of the sealing pad behind the carbon ring seal of the expander results in oil entrance to expander body and to the corresponding pipeline.

16. 研究给出了膨胀机摆动转子进行受力分析情况，对关键部件摆动转子进行了应力与变形的计算。

The study presented the status of force bearing analysis on the swinging rotor of expander, and the calculation of stress and deformation was carried out on the key component-swinging rotor.

17. 对影响循环的主要参数分析表明，二次冷媒的冷凝温度及膨胀机进口压力对循环的效率影响很大。

From an analysis of the cycle influencing main parameters it is ascertained that the condensing temperature of secondary cooling medium exercises a very great influence on the cycle efficiency.

18. 本文探讨了以汽水混合物为工质的螺杆膨胀机的定熵膨胀功率特性，提出了峰值功率膨胀比的概念。

The power characteristics of a helical screw expander during its isentropic expansion was studied in detail with the concept of expansion ratio of peak power being proposed.

19. 详细分析了引起膨胀机齿轮箱高速轴振值高的原因，提出了解决问题的办法及日常运行中应注意的问题。

Cause of high vibrated value of turbo-expander gearbox high-speed shaft was analysed in this paper. solution and attention problems were put forward.

20. 透平膨胀机现已广泛应用于轻烃回收装置，但对此类装置的一些重要的技术和操作问题一直在探讨之中。

Expansion turbine is widely used in light hydrocarbon recovery unit, but some important techniques and operating problems are still inquired into.

21. 最后，本文还在对膨胀机基本性能测试的基础上，设计并搭建了单螺杆膨胀机的有机朗肯循环发电系统。

Finally, a experimental system of Organic Rankine Cycle power generation with single screw expander was designed and built on the basis of the performance test of the expander.

22. 阐述了透平膨胀机的工作原理，分析了产生冷损的原因，并对装置运行中几种能量调节方法的优劣作了比。

The operation principle of turbine expander is described, the cause for cold loss is analyzed and several economical regulations for turbine expander are compared.

23. 在计算结果的基础上描绘了螺杆膨胀机膨胀过程内工质压力、温度随转角的变化关系图，并进行了详细的分析。

In calculating on the basis of the results painted a screw expansion of the expansion process of pressure, temperature changes in relations with the corner of the map and a detailed analysis.

24. 在对某型膨胀机气体轴承理论分析的基础上，对其气源系统进行了改进设计，使节流器实现压力流量的自动控制。

On the base of analyzing the gas axletree of expansion machine in theory, the system of gas source are mended and designed, it makes the throttle can realize the auto-control of press and flux .

25. 循环第一定律效率随着蒸发压力的增加也存在最大值，其原因是由于较高压力和流量下膨胀机入口存在汽液两相现象。

And first law efficiency of testing result also shows a maximum value for certain evaporating pressure. The reason is the gas-liquid two-phase at the expander inlet under high pump frequency.

26. 由于其介质为高炉煤气，属于易燃、易爆、有毒气体，所以要求透平膨胀机的轴端密封系统必须安全可靠，且运行经济。

Its medium is blast furnace gas which is inflammable, explosive and toxicant. Therefore, the shaft end sealing system of a turbine expander must be safe and reliable, and has economic running.

27. 由于其介质为高炉煤气，属于易燃、易爆、有毒气体，所以要求透平膨胀机的轴端密封系统必须安全可靠，且运行经济。

Its medium is blast furnace gas which is inflammable, explosive and toxicant. Therefore, the shaft end sealing system of a turbine expander must be safe and reliable, and has economic running.