预浸渍用英语怎么说，预浸渍的英文翻译

词语导航

基本信息

词语：预浸渍

繁体：預浸漬

拼音：yù jìn zì

英语翻译

【化】 pre-preg; presoak

分词翻译

预的英语翻译：

beforehand; in advance
【医】 fore-

浸渍的英语翻译：

macerate; ret; soak; soakage; steep
【计】 dipping
【化】 dip lye; dipping; impregnation; infusion; macerating; maceration
【医】 immersion; insuccation; Mac.; macerate; maceration

翻译例句

1. 部分聚合所述用第一树脂预浸渍的 部件。

Said parts, pre-impregnated with a first resin, are partly polymerized.

2. 所述预浸渍基材（32）耦接到所述基体基材（30）。

The hybrid prepreg substrate (32) is coupled to the base substrate (30).

3. 所述带有载体（51）的受载表面料（52）交界 粘结到所述预浸渍基材。

The loaded surfacer (52) with the carrier (51) is interfacially adhered to the prepreg substrate.

4. 微胶囊型固化剂，其制备方法，热固性树脂组合物，预浸渍物及纤维增强的复合材料。

Microcapsule-type curing agent, method for producing the same, thermosetting resin composition, prepreg and fiber reinforced composite material.

5. 用预浸渍部件增强的最终构件(23)的机械性能比没用预浸渍增强的相同rtm部件好，尤其是在压缩性能方面。WWW.wEnTiyi.cOm

The final component (23), reinforced with pre-impregnated parts, has better mechanical properties than the same RTM component without pre-impregnated reinforcements, in particular in compression.

6. 一种为飞行器(10)形成外部表面防护结构(12)的方法，包括将具有载体(51)的受载表面料(52)结合到混合预浸渍基材(32)。

A method of forming an exterior surface protective structure (12) for an aircraft (10) includes uniting a loaded surfacer (52) having a carrier (51) to a hybrid prepreg substrate (32).

7. 本文对热塑性复合材料用预浸料的结构及其在复合材料成型加工中的浸渍性能进行分析。

In this paper the structures and matrix impregnating behaviours during composites forming of intermediate materials by fiber mixing for thermoplastic composites were investigated.

8. 本文主要研究了浸渍压密石油焦对预焙阳极块结构与性能的影响。

The influence of impregnated and compressed petroleum coke on structure and performance of pre-baked anode has been studied.

9. 采用粉末浸渍的方法制备连续玻璃纤维增强聚丙烯预浸料，经切割获得长纤维增强聚丙烯粒子，探索了材料的注塑工艺，研究了注塑后材料的力学性能及其影响因素。

The pre-impregnation compound of continuous glass fiber reinforced PP was prepared by using powder impregnation process and cut into the long fiber reinforced PP particles.

10. 初步探索了熔融浸渍法制备碳纤维增强PEEK预浸带的制备工艺。

In this paper, the technology of carbon fiber reinforced PEEK prepreg produced by melt impregnation is investigated.

11. 如：真空冶炼，电力电容器，变压器，真空浸渍处理，真空镀膜设备中的预抽等。

For example, vacuum metallurgy, power condensers, transtormers, vacuum macerate process, fore-sucking for vacuum coating equipment, etc.

12. 熔融浸渍工艺制备连续纤维增强peek预浸带，要求纤维束必须预分散以获得浸渍效果较好的预浸带。

In the process of producing continuous fiber reinforced PEEK prepreg with the melt impregnation method, the fiber bundles are required to be well pre-dispersed to acquire good impregnated prepreg.

13. 所述的聚酰亚胺树脂适于浸渍碳纤 维、玻璃纤维或芳纶纤维等，制成预浸料；

The polyimide resin is suitable for steeping carbon fiber, fiber glass or aramid fiber and the like to be prepared into prepreg;

14. 所述的聚酰亚胺树脂适于浸渍碳纤 维、玻璃纤维或芳纶纤维等，制成预浸料；

The polyimide resin is suitable for steeping carbon fiber, fiber glass or aramid fiber and the like to be prepared into prepreg;