
词语导航
基本信息
词语:搅拌转速
繁体:攪拌轉速
拼音:jiǎo bàn zhuǎn sù
英语翻译
【化】 speed of agitator
分词翻译
搅拌的英语翻译:
agitate; beat up; churn; mix; stir; whip; whisk
【化】 agitate; agitating; agitation; stir; stir up; stirring
【医】 stir
转速的英语翻译:
rotate speed
【机】 revolving speed
翻译例句
1. 机械传动系统:设备用户可根据产品工艺特点任意选择搅拌转速。
Mechanical driving system: the equipment user can choose stirring speed according to process features of the products.
2. 通过实验确定了平板膜实验装置超滤过程的操作条件,包括搅拌转速、操作压力、流量比等。
The equipment operating condition of flat membrane ultrafiltration was determined experimentally, which including stirred speed, pressure, flux ratio.
3. 考察了胶乳种类、凝聚温度、搅拌转速等对共凝聚过程的影响规律,初步探讨了共凝聚粒子的成粒机理。
The influence of latex type, temperature and agitation speed on hetero-coagulation process were investigated. The mechanism of forming composite particles was discussed.WWw.WentIYi.COm
4. 催化剂合成热模实验表明,采用以上的搅拌形式,在一定的搅拌转速范围内,可以较好地控制催化剂的颗粒形态。
Thermal model experiment of catalyst synthesis shows the shape of the N-catalyst can be controlled by using the above optimized agitation in a certain range of rotating speed.
5. 探讨了搅拌桨型、挡板和气体分布器等结构因素及气体流量、颗粒质量分数等工艺因素对下沉颗粒三相体系临界搅拌转速的影响。
The influences of impeller types, baffle configurations and gas sparger on critical speed of floating particle in an agitated vessel were investigated.
6. 搅拌釜式反应器中的浆液浓度、临界搅拌转速、淤浆悬浮高度和环管反应器中的浆液浓度等参数,既是反应器的设计、优化的重要依据,也是实际生产运行过程中的重要控制变量。
The slurry concentration, minimum agitation speed and slurry suspension height, as the basic parameters in the solid-liquid system, is very important to the design and optimization of the reactors.
7. 搅拌轴的设计,必须进行强度、刚度和临界转速的校核,还要正确选择轴的公差配合,只有这样,才能保证轴既能正常运转,又能追求最低的加工成本。
Checking its strength, rigidity and critical speed, correct selecting its tolerance and fit are necessary in a mix axle"s design, by which the axle"s normal operation and least cost can be ensured.
8. 分散时,搅拌机转速不宜过快,防止铝片受损,影响产品质量。
When dispersing, the mixer shall not be too fast in case potential damage to aluminium flakes and affect the quality of the products.
9. 结果表明:在合适的搅拌频率下,随着输入电压的增大,金属流体的转速增大;
The results showed that rotating speed of metal fluid increased with raising the input voltage under a proper stirring frequency.
10. 介绍矿浆搅拌的工艺过程,论述了搅拌叶轮的结构、转速及再起动的过载与保护等问题。
The technological flowsheet of slurry agitation is introduced. The problems such as structure, rotation speed and overload protection of restarting of agitation impeller are discussed.
11. 空心桨叶式干燥机是一种传导加热的低转速搅拌型干燥机。
Hollow Blade dryer is a kind of mixing dryer at low speed by conducting heating.
12. 这种低转速搅拌器是剪切敏感产品的理想选择。底部和侧部刀片提高快速传热,减低罐壁产品的烧伤或冻结。
This low speed agitator is good for shear sensitive products. Bottom & side blades enhance rapid heat transfer reducing local burn-on or freeze-up of product on tank walls.
13. 水泥土的加固,可用调节搅拌轴回转速度来控制搅拌效果。
Fastened by cement, the agitation effection can be controlled by adjustment the rotation rate of agitation axis.
14. 搅拌速度为可承受的最高转速,非指电机最高转速。
Stirring speed can withstand the maximum speed, maximum speed of the motor non-means.
15. 考察了不同通气量和操作转速下气液搅拌槽内流体流动,局部气含率和气泡尺寸的分布规律。
The effects of gas flow rate and rotating speed on the fluid field, local void fraction distribution and bubble size distribution were investigated.
16. 对提取搅拌槽通过冷、热模放大实验得出,按临界悬浮转速放大,放大效应很小,是比较理想的放大方法,而且在一定转速范围内茶多酚提取属内扩散控制过程。
The results of magnification experiments show that critical suspension speed is an ideal scale-up method and the extraction process is controlled by interior diffusion within a certain agitating rate.
17. 参数显著性顺序为:焊接压力、焊接速度、搅拌头旋转转速。
The parameters in the order of significance are: pressure, welding speed, rotational speed.
18. 搅拌器传动装置的要求。旋转速度和旋转方向,轴承应用。
Requirements on agitator drives; agitator speed and direction, bearing application running accuracy, dismounting space for shaft seal.
19. 提高搅拌头的旋转速度可以成比例地提高焊接温度;
The welding temperature was directly proportional to rotation speed.
20. 从压入量、倾角、搅拌工具的外形、焊接速度、旋转速度和材料所处位置等方面研究了工艺参数对金属塑性流动的影响。
The influences of plunge depth, push angle, profile of tool, rotation speed and welding speed on metal flowing were studied.
21. 在一定参数范围内,随着搅拌头旋转速度R,R/V增加,抗拉强度极限值增加;
Among a certain scope of parameters the tensile strength would ascend with the rotation tool speed and the value of R/V rising.
22. 搅拌器和速度的选择:用户根据工作类型,按下列要求选择搅拌器和转速。
Users may select mixing tools and speed according to operating styles and the following requirements.
23. 反向旋转双螺旋桨搅拌器迅速的搅拌作用和各种转速能快速使蒸汽和奶酪颗粒融合。
The blending action and variable RPM of the counter-rotating twin agitators quickly "fuse" the steam and cheese particles together.
24. 本实用新型具有功耗低、安全、使用寿命长、体积小、转速准确的特点,是一种较理想的液体(或气体)搅拌器。
The utility model has the characteristics of small power consumption, safety, long service life, small volume and accurate rotate speed and is an ideal liquid (or gas) stirrer.
25. 考察了环己烯水合反应工艺中,反应温度、催化剂浓度、搅拌器转速、反应时间以及负荷对环己烯水合反应的影响。
Reaction temperature, catalyst concentration, agitator speed and reaction time as well as reaction load were studied as affecting factors on cyclohexene hydration reaction.
26. 结果表明,搅拌头形状和焊接速度、搅拌头转速、搅拌头偏转角度等工艺参数对焊缝成形有重要的影响。
The results show that the shape of pin, welding speed, rotating velocity, deflected Angle of pin and plunge depth have important influences on the welding formation.
27. 结果表明,搅拌头形状和焊接速度、搅拌头转速、搅拌头偏转角度等工艺参数对焊缝成形有重要的影响。
The results show that the shape of pin, welding speed, rotating velocity, deflected Angle of pin and plunge depth have important influences on the welding formation.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
