
词语导航
基本信息
词语:聚合油
繁体:聚合油
拼音:jù hé yóu
英语翻译
【机】 bobied oil
分词翻译
聚合的英语翻译:
aggregation; converge; group; polymerization
【化】 polymerization
【医】 polymerism; polymerization; polymerize
油的英语翻译:
paint; fat; grease; oil
【化】 oil
【医】 elaeo-; eleo-; oil; Ol; olea; oleo-; oleum
翻译例句
1. 他们非常需要这种聚合油。
They are in desperate need of this kind of bodied oil.
2. 以大豆油为原料,通过真空负压工艺下的热聚合反应合成大豆油墨连接料——大豆聚合油。
Taking soybean oil as raw material, the vehicle of soy ink (polymerized soybean oil) was synthesized by heat polymerization under vacuum technics.
3. 大量的实验室测试结果显示,复配的聚合物对油的相对渗透率无显著影响。
Extensive laboratory testing showed that associative polymers had no significant effect on the relative permeability to oil.
4. 用这两种聚合物溶液在不同的浓度和注入速度条件下进行了驱油实验。
The oil displacement experiments with two types of polymers were carried out under the conditions of various concentrations and injecting speeds.
5. 由于试验区地处过渡带,其井网、油层条件和原油性质具有特殊性,这些因素将影响过渡带地区聚合物驱油的开发效果。
The test area whose well pattern, reservoir conditions and crude oil properties are special, which will affect the effectiveness of polymer flooding in transitional zone.
6. 丙烯酰胺类聚合物在油田各领域应用极广,无论是钻井、固井、堵水、压裂还是驱油等多个方面都有应用。
The acrylamide kind polymers have a very wide application in oil field, like drilling cementing exclusion of water compressive fracture and flooding oil etc.
7. 综述了裂解C5石油树脂的聚合改性技术进展。
The progress of polymeric modification technologies for cracking C5 petroleum resin were reviewed.
8. 研究结果表明,亲油作用在聚合物反胶团萃取过程中起主导作用。
The results show that hydrophobic interaction plays an important role in polymeric reversed micelle extraction.
9. 聚氯乙烯糊用掺混树脂是一种颗粒外观球形化、表观密度较高、吸油率低的悬浮聚合树脂。
The PVC paste blending resin is a kind of suspension polymerized resin with spheric particle morphology, high apparent density and low oil absorption.
10. 上述结果对研究聚合物驱油机理,提高驱油效率有一定意义。
Above results have a significance in studies on the mechanism of polymer flooding and improvement of flooding efficiency.
11. 针对油田采出污水外排的问题,开展了污水稀释聚合物驱油研究。
Aiming at the problem of produced water drainage of oil fields, this paper performs a study on displacement with polymer solution diluted with produced water.
12. 通过试验证明,低矿化度清水脱氧与否对聚合物溶液粘度及驱油效果没有明显影响。
The tests show that there is no clear effect to the viscosity of polymer solution whether the water deoxidizes or not.
13. 最常见的淬火介质有水溶液、聚合物溶液和矿物油。
The most common quenchants are water aqueous, polymer solutions and mineral oil.
14. 在聚合物驱油过程中,聚合物溶液的粘度和粘弹性对提高驱油效率起到了至关重要的作用。
In the process of displacement of oil by polymer solution, the viscosity and viscoelasticity of polymer solution are vital to displacement efficiency.
15. 在聚合物携带液和油中,包裹作用使得预交联水膨体聚合物的吸水率和膨胀率减小,抗剪切能力增强。
Under the effect of wrap in the polymer fluid and oil, the water intake rate and swelling rate become weaker while the anti-shear ability become stronger.
16. 对高分子聚合膜渗透分离油中溶解气体的基本原理进行了深入分析。www.weNTIyI.CoM
Resolve inside to the high polymers membrane permeation separation oil the basic principle of the gas proceeded the thorough analysis.
17. 介绍了植物油的结构及其对植物油聚合物性能的影响。
This article introduced the structure and its" effect on property of vegetable oil polymers.
18. 利用矿场试验资料和数值模拟研究结果,评价了其试验效果,研究了聚合物驱油特征。
Using field test information and numerical simulation result, this paper evaluates the effectiveness and the characteristics of polymer flooding.
19. 该公司还开发了两种非丙烯酰胺聚合物和矿物油产品。
The company has also developed two kinds of non-acrylamide polymer and mineral oil products.
20. 为了获得聚合物驱油的最大利润,通过最优控制来确定聚合物的最佳注入策略是一种有效的方法。
Optimal control methods provide an effective way to determining the best polymer injection strategies to maximize the profits from oil recovery.
21. 为保证聚驱效果,聚合物驱油过程中一般采用低矿化度清水配制聚合物溶液。
To ensure the effect of polymer flooding, polymer flooding process generally use low salinity water for preparation of polymer solution.
22. 实验表明,采用高浓度聚合物驱油是一种较好的提高原油采收率的方法。
The experiment manifests that high concentration polymer flooding is a good way to enhance oil recovery.
23. 同时,计算结果直观反映了聚合物驱重要的“油墙”形成机理。
Also, the important polymer flooding mechanism "oil block" is illustrated in the results of calculation.
24. 但油田使用的聚合物抗盐性能比较差,因此配制聚合物驱油溶液用水必须经过严格处理,这样增大了处理的综合费用。
However, because of the poor salt resistance of the polymer, the mixing water has to be treated, thus causing the increase of the total cost.
25. 聚合物驱油技术是通过提高水的波及系数提高原油采收率。
Polymer flooding technology enhances oil recovery by increasing the sweep efficiency of water.
26. 植物油是聚合物材料合成最有希望的石油替代原料之一,成为近年来的研究热点。
Plant oil is one of the most possible substitutes of petroleum to produce polymers, so that it becomes the research hotspot in recent years.
27. 此外探讨了聚合反应条件对树脂吸油率和吸油速率的影响以及树脂的缓释性能。
The influences of reaction conditions on oil absorbency and swelling rate were studied, as well as slow release property.
28. 此外探讨了聚合反应条件对树脂吸油率和吸油速率的影响以及树脂的缓释性能。
The influences of reaction conditions on oil absorbency and swelling rate were studied, as well as slow release property.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
