计算结果单元用英语怎么说，计算结果单元的英文翻译

词语导航

基本信息

词语：计算结果单元

繁体：計算結果單元

拼音：jì suàn jié guǒ dān yuán

英语翻译

【计】 result cells

分词翻译

计算结果的英语翻译：

【计】 computing result; value

单元的英语翻译：

cell; unit
【计】 cell; LOC; U
【化】 element
【医】 element

翻译例句

1. 结果表明，采用接触单元的计算结果更为准确。

The results show that the calculated results adopted by contact element are more accurate.

2. 模型计算结果与实测比较表明，接触单元能较好地模拟桩与土之间的剪力传递和相对位移。

With comparison of computing result and test in situation, it shows that the contact element model is suited to simulating the pile-soil "s shear force transmission and relative displacement.

3. 连接密网格与疏网格的过渡单元对有限元计算结果的精度有较大的影响。

In the mesh generation of the finite element computation, the transition elements connecting the dense and sparse meshes have great effect on the precision of the computational results.

4. 如果单元选择和网格划分合适，其计算结果比较准确。

The result is very accurate if the appropriate element and mesh are selected.

5. 对有限元的计算结果进行了分析，对运用最大剪应变等值线、大主应变等值线确定可能滑动面，运用应力水平分析单元的受力状态进行了研究。

The results of FEM are analyzed , and the action of the strain isoline , stress level isoline, energy isoline and safety factor isoline is applied.

6. 模型计算结果与实测比较表明，接触单元能较好地模拟桩与土之间的剪力传递和相对位移。

With comparison of computing result and test in situation , it shows that the contact element model is suited to simulating the pile-…

7. 然后用一个RC深梁的例子，比较分析了三类单元的特点以及计算结果的精确度和可靠性。

Making an example of finite element analysis for a RC deep beam, the author compares and analyzes the feature, accuracy and reliability of these elements.

8. 本文还对体胞单元进行了有限元计算，并应用莫尔——库仑破碎准则对计算结果进行分析。

RVE is calculated with the finite element method and the Mohr-Coulomb damage rules are employed to analyse the calculation result.

9. 计算结果同时表明该辐射单元至少可以满足10%的频带宽度。

The results of calculation also show that the flat-topped element pattern and the reflection coefficient keep well at least in a 10% frequency band.

10. 指出将此单元刚度矩阵嵌入目前较流行的结构软件中，可以使计算结果与真实情况更加一致。

Meanwhile, practice show that applying this matrix in current structural software can acquire truer calculation results.

11. 分析计算结果，并针对最危险工况、危险单元、结构设计等进行了初步探讨。

The most dangerous load case, most stressed element unit, structure design, etc. are discussed based on the calculation results.

12. 采用上游加权多单元均衡解法对数学模型进行了求解，并对模拟计算结果进行了分析和讨论。

The upstream weighted multi cell balance method was used to solve the mathematical model, and simulation results are analysed and discussed.

13. 推导出薄壁高桥墩自振频率的计算公式，并将该公式计算结果与有限单元法计算值进行了分析与比较。

Equivalent stiffness method proposed by the authors is used to calculate free-vibration of thin high bridge piers, then the result of calculation is analyzed and compared with that of FEA method.

14. 计算结果表明，无单元法解决筏板基础问题的精度是令人满意的。

Numerical examples show that the accuracy of this method used in the foundation plate problems is satisfactory.

15. 在计算过程中，分别采用直接法和超单元法进行计算，并对计算过程和计算结果进行对比，从而说明了在对铣削加工数值仿真计算时采用超单元方法的有效性。

Form error distributes are illustrated to understand the machining quality and a comparison of computing time is given between the direct finite element method and the SE formulation.

16. 采用上游加权多单元均衡解法对数学模型进行了求解，并对模拟计算结果进行了分析和讨论。

The upstream weighted multi cell balance method was used to solve the mathematical model, and simulation results are a.

17. 考虑到人工截断边界上波反射对计算结果的影响，分别用传递边界和半无限单元来处理侧面和底面边界。

In order to reduce the effect of wave reflecting on artificial boundary, transmitting boundary and semi-infinite element are respectively used to treat the lateral and underside boundaries.

18. 不仅提高了团划分算法求解功能单元分配问题的计算结果一致性，而且使算法的收敛速度得以提高。

The consistency of the allocation result and the convergence speed of clique partition algorithm can be improved greatly by the heuristic method.

19. 而采用节点耦合和约束方程，则与采用梁单元铰接的计算结果基本一致。

However by applying node point coupling and restraint equations the result of calculation was basically identical with the calculation result that adopts beam unit hinge joint.

20. 针对新型荫罩式PDP显示单元结构的实例计算结果表明，使用半隐格式求解电场可使计算速度提高80倍左右。wWw.wEntIyI.com

For the SM-PDP cell structure, the calculation speed with the novel method is 80 times faster than those with the conventional way.

21. 采用边界点法分析坝基渗流问题，编制了计算程序并与有限单元法和裂隙网络法的计算结果比较。

The boundary point method has been applied to solve the problem of dam foundation seepage, and its results are compared with the results from finite element method and fissure network method.

22. 计算结果表明，在面板下设置三维接触单元能得到比较合理的混凝土面板应力结果。

The results show that the model with three-dimensions is an advisable model for the analysis of stresses and displacements of faceplates.

23. 计算结果显示，设计的高速电主轴单元主轴轴承、主轴前端温升理想，工作端轴向热位移很小。

The results indicate that temperature rises of the designed high-speed spindle bearings and the front of the spindle are very ideal and the thermal displacement of the front is very small.

24. 应用PROCESS模拟程序，对乙二醇装置进行了流程模拟计算，确定了单元操作模型及热力学方法，计算结果与国外设计数据相吻合。

The process simulation is performed for ethylene glycol plant by using the PROCESS simulation programme, and the unit operation model and the thermodynamic method are determined.

25. 文中计算了矩形、十字形及圆形单元微带阵列的雷达截面，并与常规矩量法和参考文献的计算结果进行了比对，验证了该方法的有效性。

In this paper, radar cross section of arrays with rectangular, cross-shaped and circular element is computed and the results are compared with the that of method of moment to validate this method.

26. 同时，在计算方法上，对裂纹顶端附近较密和较疏两种单元网格的计算结果进行了比较。

Comparison between the calculated results with coarse and fine finite element meshes around crack tip is also made.

27. 计算结果表明：实体模型计算结果准确但建模复杂，与之相比，虚拟横梁单元模型的最大误差为-2.3%。

The results show that the solid element model are accurate but modeling complex, the virtual beam element model has the maximum error about -2.3% compared with the solid model.

28. 法进行了非线性数值计算，计算结果表明采用超弹单元进行的数值分析与实验结果接近。

L method. The results showed that the numerical calculation one by use of supper elastic cells is very close to the experiment one.

29. 编制了基于弹性悬链线单元的斜拉索的非线性有限元分析程序，比较了斜拉索的悬链线解析解、抛物线解析解和基于弹性悬链线单元的有限元解的计算结果。

Nonlinear finite element program of stayed cable based on the elastic catenary element is programmed. The analytic analysis and finite element analysis of different stayed cables are compared.

30. 本文同时给出了电阻网络模拟方法所得到的结果，并与有限单元计算结果进行了比较，两者是一致的。

At the same time, we obtained results from the analog method by means of resistance network. The results were compared with that of the finite element method, and they are in good agreement.