电镀铅用英语怎么说,电镀铅的英文翻译


词语导航

基本信息

词语:电镀铅

繁体:電鍍鉛

拼音:diàn dù qiān

英语翻译

【化】 lead (electro)plating

分词翻译

电镀的英语翻译:

electroplate; eletroplate; galvanization; galvanoplastics; plate
【计】 electroplating
【化】 electroplating
【医】 galvanization; plating

铅的英语翻译:

lead
【医】 molybd-; molybdo-; Pb; plumbi; plumbum

翻译例句

1. 介绍了采用两种产品的电镀铅、锡及铅-锡合金工艺。

Lead, tin and tin-lead alloy electroplating technologies using these two products are introduced.

2. 锡焊件、铅锡合金、锌压铸件、铍青铜、磷铜等合金在电镀前也常用预镀铜来改善结合力。

Tin welding parts and lead-tin alloy die casting, zinc, beryllium bronze, phosphorus copper alloy in electroplating copper with commonly used before also gets to improve adhesion.

3. 以硼酸锌玻璃体为基础的高压二极管的电镀层的铅的替代品仍然不切实际。

No practicable substitutes for lead in the plating layer of high voltage diodes on the basis of a zinc borate glass body are available.

4. 电镀后用加热法除内应力或电镀时与1%的铅共沉积可避免这一特性。

After plating with heating except with 1% of the internal stress or plating of sedimentary can avoid this lead a characteristics.

5. 尽管铅不如铜、锌、镉和铭那样常见,但它却是电镀废水中的普通组分。

Lead is also a common constituent of plating wastes, although not so frequently encountered as copper, zinc, cadmium and chromiurn .

6. 结果表明,该方法简便、快速、干扰小,测定的准确度和精密度高,适用于电镀过程中铅浓度的跟踪测定。Www.wENtiYi.Com

Results showed that the method, characterized as simple, rapid, little interfere and high accuracy and precise, was suit to monitor the Pb concentration in plating process.

7. 结果表明,该添加剂工艺稳定性好,且镀层可焊性优良、抗变色能力强,可取代高污染的锡铅电镀工艺。

The result proves that the process has advantages of high stabilization, excellent solderability and antitarnishing, which may replace high-pollution tin-lead electroplating technology.

8. 主要产品有:焊锡丝、焊锡条、无铅锡线、无铅锡条、锡膏、锡锭、助焊剂、电镀阳极棒、巴氏合金等。

The main products are: solder wire, lead-free solder bar, line, lead-free solder paste, strips, tin ingots, flux, electroplating anode, babbitt, etc.

9. 为了防止铅系合金阳极引发电镀锌钢板黑变,对不同成分及不同制造方法得到的阳极进行了电化学性能研究。

The electrochemical characteristics of lead based alloy anodes with different composition prepared by different way are researched for suppressing the black patina of galvanized steel sheets.

10. 在含有铅、锡、铜、镍和一些贵金属的电镀池中,甲磺酸(msa)是一种很好的电解质。

Methane sulphonic acid (MSA) has the right combination of properties for electroplating baths containing lead, tin, copper, nickel and some precious metals.

11. 此法已被成功应用于测定锡-铜-铅合金电镀液及其镀层中的锡、铜和铅。

Cu and Pb ions in the alloy plating bath and composition of its deposits.

12. 在发现铅是导致电镀锌钢板黑变发生的关键因素的基础上,对电镀锌钢板的黑变机理提出了锌铅共沉积假说和硫酸铅胶体膜假说;

On the basis of finding that lead is the vital factor to bring patina on galvanized steel sheets, two hypothesizes, colloid film of lead sulfate and the codeposition of zinc and lead, were employed.

13. 因此,电沉积无铅可焊性镀层是电子电镀领域的研究热点之一。

Therefore, electroplating of lead-free solder coating is one of investigation hotspots in electronic electroplating field.

14. 批发采购电镀助剂-供应666无铅无镍光亮厚白铜锡(电镀助剂)批发…

The lead-free nickel free white and bright nickel substitute plating process…bright nickel substitute tin salt 30g 666 lead-free nickel free white and …

15. 着重介绍了电镀金、金锡、锡铅、锡银和化学镀镍凸点的工艺过程,最后简单介绍了制备凸点的电镀设备。

Electroplating processes of Au, Au-Sn, Sn-Pb, Sn-Ag and chemical nickel-plated bumpings are described in particular. And finally, electroplating equipments for bumping formation are introduced.

16. 概括线缆产业主要工艺技术及污染因素,并归纳行业废酸、酸雾、磷化废水、电镀废水、铅污染等主要污染问题的已有治理技术。

Main process technology and pollution factors of wire and cable industry are pointed out. The existing control methods are summarized for such problems as waste acid, acid mist, was...

17. 概括线缆产业主要工艺技术及污染因素,并归纳行业废酸、酸雾、磷化废水、电镀废水、铅污染等主要污染问题的已有治理技术。

Main process technology and pollution factors of wire and cable industry are pointed out. The existing control methods are summarized for such problems as waste acid, acid mist, was...

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!