
词语导航
基本信息
词语:高镍的
繁体:高鎳的
拼音:gāo niè de
英语翻译
【化】 niccolic
分词翻译
高的英语翻译:
high; high-priced; lofty; loud; tall
【医】 homo-; hyper-; hypsi-; hypso-; per-
镍的英语翻译:
nickel
【化】 niccolous; nickelous
【医】 Ni; niccolum; nickel; wire
【经】 nickel
翻译例句
1. 结果表明,碳显著的影响低碳高合金钢的组织和性能,而以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that carbon influences structure and properties of LCHA significantly, and substitution for nickel with manganese may result in expected structure and properties.
2. 文章最后还对以锰代镍低碳高合金钢的冲击腐蚀磨损机制进行了探讨。
At last, this article also discussed the mechanisms of corrosive impact abrasion for these LCHA after substitution for nickel with manganese.
3. 结果表明,以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that LCHA with Mn in place of Ni could gain the anticipated structure and performance.
4. 讨论了影响高比能镍氢电池正极材料氢氧化镍性能的因素。
The factors effecting on the performances of nickel hydroxide which is used as positive active material in high specific energy Ni/MH battery are discussed.
5. 介绍了应用DV - 4光电光谱仪,仅用一种测定条件,测定高合金钢中碳、硫、磷、锰、硅、铬、镍、钼、钒、钨、钛、铌、铝元素的含量的方法。
The method of measuring c, s, p, Mn, Si, Cr, Ni, Mo, V, W, ti, Nb, Al element content by DV-4 photoelectric spectroscope on one condition is introduced.
6. 本文根据甲烷裂解过程中碳纤维的生长机理,设计并制备了具有高活性的纳米镍基催化剂。
In this paper, high active Ni-based catalysts for methane decomposition were designed and prepared according to the growth mechanism of carbon filaments.wWw.WeNTiyI.CoM
7. 通过混合掺杂改性,可以得到容量大、循环性能好、热稳定性高的掺杂锂镍氧正极材料。
Solid solutions of the cathode material with high capacity, excellent recycling ability and good thermal stability can be synthesized by co-doping technology.
8. 研究了用火焰原子吸收法分析高纯铅中痕量钴、镍的测定条件。
The optimum conditions for determining trace of cobalt and nickel in high purity lead by FAAS were studied.
9. 不锈钢和高镍耐蚀合金是重要的耐蚀材料。
The stainless steels and high nickel corrosion resistant alloys are critical engineering materials.
10. 结论永久性部分覆膜镍钛合金内支架置入术是消化道恶性梗阻和食管-支气管瘘的有效治疗方法,操作简便,安全性高。
Conclusion it is an effective, easy and safe method to treat malignant obstruction of digestive tract or esophago-bronchial fistula using partially covered nickel-titanium alloy stent.
11. 通过正交试验法优选出一种具有高磷含量的快速化学镀镍工艺配方。
An electroless nickel plating process with high deposition rate was optimized by orthogonal test.
12. 在改进的MLD - 10型冲击腐蚀磨损试验机上,选择三种不同的冲击功,对以锰代镍的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
Under three different impact energy, LCHA with Mn in place of Ni were tested with a modified MLD-10 wear tester to investigate their behavior of corrosive impact abrasion.
13. 研究了粉末轧制—烧结工艺生产高纯多孔镍箔的方法。
Powder rolling-sintering process for producing high pure nickel porous foils has been studied.
14. 而切向永磁体采用剩磁密度高但矫顽力却很低的铝镍钴。
The tangential-set magnets are AlNiCo with high remanent flux density and low coercive force.
15. 高氮低镍不锈钢具有良好的强度、延展性及耐腐蚀性能,且可以降低晶界的腐蚀敏感性。
High nitrogen and low nickel stainless steels exhibit attractive properties as high strength and ductility, good corrosion resistance and reduced tendency to grain boundary sensitization.
16. 实践表明:工艺稳定,设备结构合理,产出的宽幅薄镍箔厚度均匀、纯度高、机械性能和表面性能良好。
The results show that the process is stable, the equipment structure is reasonable, the nickel foils produced have uniform thickness, high purity and good mechanical and apparent performance.
17. 刷镀铁与刷镀镍相比具有成本低、硬度高的优点。
Compared with brush plating Ni, brush plating Fe has more advantages as low cost and high hardness.
18. 原料低硫高冰镍为高冰镍经磨浮-磁选分离获得的富含贵金属的磁性产品,主要含有镍合金和少量硫化物。
This magnetic matte was obtained from high grade Ni-Cu matte by floatation-magnetic separation, which enriched in precious metals, and mainly contained Ni alloys and a small quantity of sulfides.
19. 镍钛形状记忆合金棒是一种具有形状记忆效应、强度高及组织相容性好的新型矫形材料。
Shape memory stick of nickel-titanium alloy is a new kind of orthopedic material which has the effect of shape memory, high strength and gets along well with body tissues.
20. 钢铁件上薄层亮镍的高孔隙率必然带来低的抗蚀性。
The corrosion resistance of high porosity is very low on the thin bright nickel plating for steel and iron works.
21. 高速电弧喷涂镍铝涂层结合强度高,涂层组织致密,是优良的打底涂层。
It was proved that high velocity arc spraying Ni-Al coating is one of best intermediate coatings with high adhesive strength and fine structure.
22. 阐述了各工艺步骤的配方及操作条件。过渡层采用高堆积碱铜,工作层为快速刷镀镍。
Formula and operating conditions of the procedures were described, high-packed alkaline copper deposit was adopted to act as interlayer and fast nickel brush deposit as working layer.
23. 镀镍层质量是检验无氰高硅铝合金浸锌液性能的重要手段。
The quality of nickel deposit is an important indicator to test the performance of cyanide-free zincating solution for high-Si aluminum alloy.
24. 本文研究了低硫高冰镍常压选择性浸出的动力学过程。
In present work, a kinetic study on selective leaching of low-sulfur Ni-Cu matte at atmospheric pressure was conducted.
25. 本文研究了低硫高冰镍常压选择性浸出的动力学过程。
In present work, a kinetic study on selective leaching of low-sulfur Ni-Cu matte at atmospheric pressure was conducted.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
