分布屈服用英语怎么说,分布屈服的英文翻译


词语导航

基本信息

词语:分布屈服

繁体:分佈屈服

拼音:fēn bù qū fúWww.WEnTiYi.COm

英语翻译

【电】 distributed yielding

分词翻译

分布的英语翻译:

【化】 distribution
【医】 distribution; supply

屈服的英语翻译:

give in; bend; bow; knuckle under; submit; succumb; yield
【化】 yield; yielding

翻译例句

1. 磁流变液完全屈服时,磁流变液角速度随半径呈非线性增加,工作间隙中磁场越强,流场的非线性分布越明显;

When the MRF wholly yields, the angular velocity of MRF increases nonlinearly with its radius, the non-linear distribution becomes more obvious as the magnetic intensity in the working gap increases.

2. 通过含有结构面的岩体的应力,位移以及屈服区的分布特点,讨论了反倾边坡的稳定性问题。

By using distribution features of stresses, displacements, and yield zones in rock mass, the stability problem of anti inclined slope is discussed.

3. 本文采用基于多孔介质下“有效应力原理”的土壤非线性屈服准则来研究压力分布对附着力的影响问题。

The paper applies the nonlinear soil yield law of "principle of effective stress" based on porous medium to study influence of pressure distribution to adhesive force.

4. 随着塑性粘度的增加,宾汉流体和颗粒相的主流速度分布出现了与屈服应力带来的影响的相反趋势。

With the increasing of the yield stress, the velocities of Binghamand particle decrease, but with the increasing of the plastic viscosity, the velocities of Binghamand particle increase.

5. 其应力分布非常复杂,而且有超过材料屈服应力的应力峰值。

The stress is very complex and may reach to a peak value exceeding the yield stress of the material.

6. 采用金属材料微元屈服极限随机分布模型,计算出每次循环产生的微观塑性应变,并与用单调拉伸试验确定的材料真实断裂延性联系起来。

Randomly distributed models of micro-plastic strains were used to calculate the micro-plastic deformation produced at each cycle of the steel under high cycle fatigue test.

7. 运用双剪统一屈服准则,对线性荷载的两种不同分布形式作用下的固支圆板进行了弹塑性分析,分别得出了相应的统一解形式。

A unified solution of plastic limit of simply supported circular plates subjected to border uniform distributed loading is presented based on the Twin Shear unified Yield Criterion.

8. 在界面的弹性变形区域的应力分布呈直线型,这种线性分布从截面中性轴开始到其屈服区域结束。

In the elastic region of the cross-section, the stress distribution varies linearly from the neutral axis to the beginning of the yielded area.

9. 采用热弹塑性有限元方法,对平板对接接头中焊缝金属强度组配对焊接残余应力分布的影响进行了研究。结果表明,对于高组配接头,纵向残余应力的峰值接近焊缝金属的屈服极限,出现在焊缝中心。

In this paper the effect of strength matching of welded joint on welding residual stress distribution in plate welded joints was studied by an thermal elastoplastic finite element method.

10. 采用热弹塑性有限元方法,对平板对接接头中焊缝金属强度组配对焊接残余应力分布的影响进行了研究。结果表明,对于高组配接头,纵向残余应力的峰值接近焊缝金属的屈服极限,出现在焊缝中心。

In this paper the effect of strength matching of welded joint on welding residual stress distribution in plate welded joints was studied by an thermal elastoplastic finite element method.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!