
词语导航
基本信息
词语:整光
繁体:整光
拼音:zhěng guāng
英语翻译
【机】 lay the grain
分词翻译
整的英语翻译:
complete; full; whole
【经】 flat
光的英语翻译:
light; ray; honour; merely; naked; scenery; smooth
【化】 light
【医】 light; phot-; photo-
翻译例句
1. 为了弄清“没铺地毯的地方”一句里的隐义,整堂课光讨论就花去了15分钟。
The class spent 15 minutes teasing out the metaphorical meaning of a line about "places with no carpet on the floor."
2. 提出齿轮的表面质量对其使用性能和寿命有着极为重要的影响,并详细论述了脉冲电化学机械齿轮光整工艺,及其加工后的齿轮的表面质量特性。
This paper points out that a gear"s surface quality has important influence on its employment performance, and pulse-electrochemical mechanical finishing in gear machining is discussed in detail.
3. 极间间隙是对脉冲电化学光整加工具有重要影响的工艺参数,保持极小的极间间隙加工,可以提高工件的表面光泽度以及加工的尺寸精度。
Interelectrode clearance is one of the most important parameter of it, keeping minimal clearance while machining will improve the part"s surface gloss and size accuracy.
4. 滚压是大深缸孔光整加工方法之一。
Rolling is one of the methods for finishing big diameter deep cylinder-hole.
5. 论述脉冲电化学光整加工特点,研究脉冲电化学光整加工机理,根据光整加工原理进行实验设计。
Based on the characteristics about pulse electrochemical finish machining (PEFM), its mechanism is studied. According to finish machining principles the experimental design is carried out.
6. 等离子熔积快速制造技术是采用等离子熔积与光整技术集成直接快速精细制造金属零件原型或零件。
The technology of Plasma Powder Deposition Manufacturing (PPDM) integrates the plasma spray welding and finishing technology to manufacture the metal part or prototyping directly and rapidly.
7. 同时经过大量的实验验证,光整加工设备对降低曲轴表面粗糙度、提高表面显微硬度和清洁度能够起到很好的效果。
A great deal of tests show that the finishing equipment has a very good effect on reducing crank"s surface roughness, increasing its microhardness and cleanliness.
8. 高频脉冲电流加工及光整加工技术能提高零件的加工精度和表面质量。
High frequency pulse current machining and fine finishing can improve parts" machining accuracy and surface quality.
9. 由于目前的加工方法主要是机械光整加工,存在着加工质量差、生产率低、成本高的问题。
Mechanical Finish Machining has the question of low productivity and high cost. Therefore, it can"t satisfy the practical production.
10. 采用四轴联动数控铣床及自行设计的指状铣刀和数控程序,对膨胀机叶轮进行光整加工。
Four shafts linkage NC milling machine is used for polishing impeller of an expending machine, which finger - like milling cutter and NC system is designed.
11. 在上述研究的基础上,结合螺旋锥齿轮的精切齿原理及特点,探讨了脉冲电化学光整加工在螺旋锥齿轮上的应用模式。
It is discussed the application mode of PECF on the spiral bevel gear based on the research above and the principle and characteristic of precision cutting of spiral bevel gear.
12. 在本文中,提出了一种新型的光整加工方法—电化学机械复合光整加工(ECEF),并详细的论述了其加工原理。
In this paper, a new finishing machining method - Electrochemical Mechanical finishing (ECEF) is put forward, and the mechanism of ECEF is explained in detail.
13. 光整加工作为模具加工的最后一道工序,其加工质量一般影响着产品的最终质量和使用性能。
Finishing machining as the last procedure of mould machining usually is the most important working procedure, its finishing quality affects directly the final quality and using performance of product.
14. 通过界面双电层电容值的变化来解释脉冲电化学光整加工提高精度的根本原因;
The reason for the improvement of precision by the EP is the change of double layer capacity value.
15. 磁性研磨是一种利用磁场中的磁性磨料对具有相对运动的工件表面进行光整加工的新技术。
The magnetic abrasive finishing is a new technology used to process the surface of work piece by the relative motion with magnetic abrasive in the magnetic field.
16. 研究表明,主轴行星式滚磨加工方法可以完成对曲轴类零件的光整加工,同时为此种加工方法的实际应用提供了参数依。
The research result shows that SPBF can be applied to the surface finishing of crank parts, and provides a parameter reference for application of this technology.
17. 液体磁性磨具光整加工技术是用磨具本身的流变特性对工件表面进行光整加工的新技术。
This liquid magnetic grinding apparatus polishing technology is a new polishing technology applying the rheologic property of grinding apparatus.
18. 具备结构简单,操作方便等特点,可代替磨削进行光整加工。
This device is an simple machine and easy to operate, which can replace grinding.
19. 为了满足螺旋锥齿轮等大型零件的脉冲电化学光整加工的要求,设计了高频、窄脉宽、大电流的脉冲电源。
To meet with the requirement of PECF finishing, pulse power source with high frequency, narrow pulse width and high current is designed.
20. 多年来一直致力于光整设备,环保设备,清洗设备的研究开发设计工作。
Over the years has been committed to light the whole equipment, environmental equipment, cleaning equipment research and development of the design work.WWw.weNTIyI.COM
21. 针对当前曲轴加工过程中存在的表面质量差、清洁度不高等问题,指出了开发研制新型光整加工设备的必要性,并简要介绍了其工作原理。
Aiming at the problems about surface quality and cleanliness of cranks, the necessity of exploiting new finishing equipment is put forward and of which the principle is introduced.
22. 在分析研究脉冲电化学光整加工原理的基础之上,结合实际进行了实验设计。
Based on analyzing the mechanism of pulse electrochemical finish machining, a practical experiment is designed.
23. 液体磁性磨具光整加工技术是一种新型的精密表面光整加工技术。
Liquid-magnetic abrasive tool finishing is a kind of new technology on precise surface finishing.
24. 胆系结石14例,见胆管或胆囊内光整的隆起性改变,临近管壁光整;
In 14 cases with bile duct stone, there were regular and smooth prominences with normal biliary wall.
25. 对脉冲电化学光整加工(PEFM )中所采用的一种电解液的伏安特性进行了实验研究。
The volt ampere properties of electrolyte in pulse electrochemical finish machining (PEFM) are investigated in this paper.
26. 液体磁性磨具光整加工法是利用液体磁性磨具的磁流变特性开发的表面光整加工方法。
The liquid-magnetic abrasive tool finishing technology is the surface finishing technology which utilizes the magnetic rheological property of the liquid-magnetic abrasive tool.
27. 根据实验得到的优选数据进行加工,有效地降低了表面粗糙度3 ~5级,达到了光整加工目的。
The goal of finish machining is achieved and surface roughness is reduced 3 ~ 5 grades based on experimental data.
28. 实验结果表明,用液体磁性磨具对零件表面进行光整加工可以达到满意的效果。
Using liquid-magnetic abrasive tool finishing workpiece, the quality of surface can obtain satisfied effect.
29. 实验结果表明,用液体磁性磨具对零件表面进行光整加工可以达到满意的效果。
Using liquid-magnetic abrasive tool finishing workpiece, the quality of surface can obtain satisfied effect.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
