加强肋用英语怎么说,加强肋的英文翻译


词语导航

基本信息

词语:加强肋

繁体:加強肋

拼音:jiā qiáng lèi

英语翻译

【化】 bracing; reinforcing rib; stiffener; strengthening rib

分词翻译

加的英语翻译:WWw.weNtiyi.Com

add; append; increase; plus; tot; tote
【医】 add; adde; addition; admov.

强的英语翻译:

better; by force; make an effort; powerful; strive; strong; stubborn

肋的英语翻译:

costal region; rib
【医】 costa; costae; costo-; rib

翻译例句

1. 加强肋之间压力弦条处的腹板。

Web at pressure chord between stiffeners.

2. 用加强肋可以明显改善承载力,但对变形性能的影响较弱。

The reinforcing rib can enhance the bearing capacity, but have little influence on the deformation ability.

3. 随着加强肋刚度的增加,应力强度放大因子则相应有所减小。

The relatively small reduction in stress intensity magnification factor with increasing stiffness of the stiffener.

4. 薄板的强度沿加强肋轴向随气体核尺寸和气指增加和轻微降低(见图10)。

The strength of plaques bent along their rib axis decreases slightly with increasing gas core size and fingering (See Figure 10).

5. 图7展示了气体辅助注塑成型中设计的大加强肋几何结构和坚固度增加的关系。

Figure 7 shows how the stiffness increases with larger rib geometries designed for gas-assist molding.

6. 保护了主加强肋在加工应用过程中不会受到破坏,从而提高塑钢缠绕直肋管的环刚度。

The main reinforcing rib is protected against being destroyed in the processing and applying process, thereby enhancing the ring stiffness of a straight ribbed pipe wound by glass-reinforced plastics.

7. 压延机框架带有加强肋,并经过膨胀处理,从而赋予最佳的刚性,防止发生扭曲和振动。

The calender frames are provided with stiffening ribs and distension treatment granting the maximum rigidity together with the absence of distortions and vibrations.

8. 相反,诸如加强肋盘等零件来说,相较于其同一固体配对物,其坚固度重量比只高出5%。

In contrast, parts such as ribbed plates generally have stiffness-to-weight ratios that are typically only 5% higher than their identical solid counterparts.

9. 然而,关于薄板垂直于加强肋轴向的弯曲强度,当气泡宽度超过肋基宽度一半时,在强度方面可见有巨大降低。

However, for plaques bent perpendicular to their rib axis, there can be a sharp decrease in strength when the bubble width exceeds half of the rib base width.

10. 采取增厚加强肋的办法不断提高了油底壳的强度,而且也达到了降噪增频的作用,从而有效地控制了油底壳的裂纹。

An effective control of cracks at oil-reserving bottom comes from increasing strength of the bottom by thickening reinforcing rib, and increasing frequency by reducing noise also achieves.

11. 对铝板卷焊环肋加强圆柱耐压壳体结构参数、释放分离机构工作的安全可靠性以及航行器下沉方式进行了分析和研究。

Structural parameters of aluminum hull with enhancing structure, reliability of the releasing device, and means of AUV sinking have been studied and analyzed in particular.

12. 住所甲板内部结构应该在各自肋位处用加强横梁加强,在适当的间隔处用纵向梁支撑以防止震动。

Deck plating inside accommodation shall be stiffened by transverse beams at each frame and supported by longitudinal girders in suitable intervals to avoid vibrations.

13. 在118肋位和133肋的甲板下加强横梁,并且与舷侧的强框架对齐。

Provide suitable deck transverse members aligned with side transverse web at FR. 118&133.

14. 本发明是一种旋轮翼,它具有缘肋和桨叶,其特征是:把旋翼或螺旋桨的桨叶和飞轮的轮缘及加强环肋结构有机地结合成为一个整体,使之具有飞轮与旋翼或螺旋桨的双重功能;

The invention is characterized by the combination of the blades of a propeller and the wheel rim or ring rib of a flywheel, and has dual functions of a flywheel and a rotor wing or a propeller;

15. 本发明是一种旋轮翼,它具有缘肋和桨叶,其特征是:把旋翼或螺旋桨的桨叶和飞轮的轮缘及加强环肋结构有机地结合成为一个整体,使之具有飞轮与旋翼或螺旋桨的双重功能;

The invention is characterized by the combination of the blades of a propeller and the wheel rim or ring rib of a flywheel, and has dual functions of a flywheel and a rotor wing or a propeller;

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!