流动注塑用英语怎么说,流动注塑的英文翻译


词语导航

基本信息

词语:流动注塑

繁体:流動註塑

拼音:liú dòng zhù sù

英语翻译

【化】 flow injection moulding

分词翻译

流动的英语翻译:

flow; flowage; fluxion; on the move; run; stream
【医】 afflux; flow; fluxion; streaming movement
【经】 circulating; floating; flow

注塑的英语翻译:

【化】 injection molding; injection moulding

翻译例句

1. 根据注塑成型过程中高分子的运动特点,提出注塑成型制品的各点在收缩过程中将沿其流动路径进行收缩的观点。

On the ground of movement characteristics of macromolecules during the injection molding process, a thought is put forward that a point will shrink along its flow path.

2. 超强硬,抗寒耐热、易流动和加工友好、黑尼龙66树脂为注塑成型。它提供了最好的抗室外曝露。

Super Tough, weatherable, easy flow and processing friendly, black polyamide 66 resin for injection molding. It offers the best resistance to outdoor exposure.

3. 介绍了一种高流动性快速固化酚醛注塑料的配方、制备工艺及其成型时间和流动特性。

Formulation, process conditions, curing time and flow behavior of phenolic resin for injection molding with excellent flowability and fast-curing characteristic were described.

4. 一个无加强,低粘度聚对苯二甲酸丁二醇酯的注塑成型。它具有很高的流动特性,并特别适合于超快速生产。

An unreinforced, low viscosity polybutylene terephthalate for injection molding. It has high flow characteristics and is specifically suitable for super fast production.

5. 注塑件残余应力主要有流动残余应力和残余热应力,文中主要考虑注塑件的残余热应力。

There are two kinds residual stress of injection molded parts, flow residual stress and thermal residual stress.

6. 在聚合物加工过程中,比如挤出、注塑以及纺丝等,聚合物材料将遭受各种不同的流动场。

During polymer processing, such as extrusion, injection molding, and fiber spinning, polymer materials are subjected to various flow fields.wWw.WentIyi.Com

7. 考察了辊压工艺及酚醛树脂的邻对位比值(O/P)对酚醛注塑料的成型时间及流动性的影响。

The effect of rolling condition and O/P value of phenolic resin on the curing time and flowability of phenolic resin for injection molding was studied.

8. 研究了注塑成型过程中CAD模型向CAE模型转换的方法和网格生成技术对注塑流动模拟的影响。

In this paper, the influence of the mesh generation method on injection molding simulating during the transition course of CAD model to CAE model is analyzed.

9. 其次介绍了注塑模流动模拟理论,建立了流动过程的数学模型。

Second, flow simulation theory of injection plastic mould is introduced, math model of flow is established.

10. 本文进一步研究了不同种类的聚乙烯对UHMWPE流动改性的效果与机理,并在此基础上研制出UHMWPE注塑料的基础配方。

The modification effect and mechanism of several kinds of PE to UHMWPE was studied, and on this base, UHMWPE materials for injection were studied.

11. 在注塑加工数值模拟过程中,模腔的表面温度直接影响塑料熔体的流动和固化过程,所以模腔表面温度的计算对注塑数值模拟的结果起着极为重要的作用。

The temperature on mold cavity"s surface affects the melt"s flow and cooling in the course of injection molding, then has an important part in the solution of injection molding.

12. 增韧,热稳定,黑色尼龙66树脂注塑。它是一种高流动性,加工友好材料。

Toughened, heat stabilized, black polyamide 66 resin for injection molding. It is a high flow, processing friendly material.

13. 本文提出了一种基于一维流动模型,采用有限差分分析,迅速得到多个注塑条件初选值的理论方法。

This paper introduces a method based on 1 D flow model and FDM to get some injection parameters rapid Rapidly.

14. 应用三维流动模拟软件HSCAE3D6 0对冰箱定位板注塑模的浇注系统进行优化。

A 3d flowing simulation software HSCAE3D6.0 was applied to optimizing the pouring system of positioned panel injection-mould.

15. 分析了微尺度下熔体壁面滑移机理,研究了微注塑成形中壁面滑移对熔体充模流动行为的影响。

Based on the analyses of wall slip mechanism of polymer melt flowing, the effects of wall slip on melt filling flow behavior in micro injection molding were investigated.

16. 使薄壁成型提高注塑流动性,提高产品品质和强度。使厚壁成型注塑周期可降低60%以上。

In case of thin wall forming, increase injection moulding flowability, product quality, and strength; incase of thick wall forming, decease the injection moulding period by more than 60%.

17. 注射模的浇注系统是指从注塑机喷嘴开始到型腔为止的塑料流动通道,它是模具的一部分,一般分为普通流道浇注系统和无流道浇注系统两大类。

The runner system in the injection mold serves to convey the plastic melt coming from the nozzle of the injection molding machine to the cavity.

18. 本文在分析注塑模充模流动的基础上,通过具体实例,阐述了计算机辅助分析在模具设计中的作用。

Based on the analysis of polymer flow in mold filling, the important role of computer aided analysis in injection mold design is presented through concrete examples.

19. 使厚壁成型注塑周期可降低60%以上,增强塑料的流动性及填充效果。

The injection molding period for the thick wall forming may be reduced by over 60%, improving plastics fluidity and filling effect.

20. 使厚壁成型注塑周期可降低60%以上,增强塑料的流动性及填充效果。

The injection molding period f the thick wall fming may be reduced by over 60%, improving plastics" fluidity filling effect.

21. 而剔除STL面片数据中的冗余顶点是重构的关键,该算法已经成功应用于三维真实感注塑模流动模拟软件的3d图形处理。

Filter the redundancy vertex in STL solid is very important. The algorithm is successful to deal with 3d graphic in realistic mold flow simulation software.

22. 在热流平行于注塑过程中流体流动方向上,使用了增容剂PE - AA的样品的热导率大于另外两个样品。

The thermal conductivity of sample containing the PE-AA is smaller than another two samples without PE-AA in the direction a, while bigger than another two samples without PE-AA in the direction b.

23. 在热流平行于注塑过程中流体流动方向上,使用了增容剂PE - AA的样品的热导率大于另外两个样品。

The thermal conductivity of sample containing the PE-AA is smaller than another two samples without PE-AA in the direction a, while bigger than another two samples without PE-AA in the direction b.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!