热固性塑料用英语怎么说，热固性塑料的英文翻译

词语导航

基本信息

词语：热固性塑料

繁体：熱固性塑料

拼音：rè gù xìng sù liào

英语翻译

【化】 thermoset; thermoset(ting) plastic(s)

相关词条

1.thermosettingplastic(s)  2.thermosettingresin  3.thermosettingplastics  

分词翻译

热的英语翻译：

ardent; caloric; craze; eager; fever; heat; hot; warm
【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-

性的英语翻译：

character; gender; nature; quality; sex
【医】 gam-; gamo-; geno-; sex

塑料的英语翻译：

【化】 plastic; plastics
【医】 plastic

翻译例句

1. 热固性塑料在今天可能仅占少数。

Thermosets may be in the minority today.

2. 热固性塑料只是其中一小部分。

Thermosets are just a tiny slice.

3. 适用于全部热塑性塑料和部分热固性塑料。

Apply to all parts of thermoplastic and thermosetting plastics.

4. 因此，硬质橡胶实质上是一种热固性塑料。

Hence, ebonite is in fact one kind of thermosets.

5. 利用废胶粉制备出一种高强度、高模量热固性塑料。

A kind of thermosets with high strength and high modulus was prepared by scrap rubber powder.

6. 热固性塑料又分甲醛交联型和其他交联型两种类型。

Thermosetting plastics and formaldehyde cross-linking points and the other two types of cross-linking.Www.WeNTiyI.COm

7. 另外，胶木是一种热固性塑料，一经成型，便不能再次熔化。

Plus, Bakelite was a thermoset, a plastic that once formed, cannot be melted again.

8. 用转矩流变仪测定热固性塑料的热流量和固化特性的试验方法15。

Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer 15.

9. 注射成型是热塑性塑料和一部分热固性塑料最主要的成型加工方法。

Injection molding is the mostly used processing technology for all thermoplastic materials and part of thermoset...

10. LUUB易于分散在橡胶，热固性塑料及热塑性塑料，油脂，油墨中。

LUUB is easy to disperse in rubber, thermosets and thermoplastics greases and printing ink.

11. 论述了热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。

Molding process, equipment and die of thermosetting plastics for injection molding discussed in the paper.

12. 最后还对热固性塑料制品模具的合理选材及用材问题进行了分析及讨论。

Finally analysts and discussion were made about the reasonable selection of materials for bakelite product moulds.

13. 阐述了用可熔型芯注射成型热固性塑料的工艺过程和原理、工艺控制要点。

The technological process, principles and the key points of technology controlling of the thermosetting plastic by using the fusible core injection moulding were described.

14. 主要用于压制橡胶及热固性塑料的模型与非模型制品及压制发泡类塑料制品。

Used for stamping rubber, moulded and non-model products of thermo plastics, and products of foaming plastics.

15. 本产品以酚醛树脂为粘合剂，加入矿物填料及其它添加物而制成的热固性塑料。

He product based on phenolic resin as adhesive with mineral filler and other additives is processed into thermosetting plastics.

16. 论述了无流道热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。

The molding method, process, and the equipment of thermoset runnerless injection molding have been discussed in this paper.

17. 但是，可能会发生问题，因为软化热固性塑料可以结束了硬化，同时仍处于暖气厅。

But problems can occur because the softened thermosetting plastic can end up hardening while still in the heating chamber.

18. 介绍了推杆自动切断浇口机构在热固性塑料注射模中的具体结构、 模具工作过程。

The structure, operating principle and action of mechanism of automatic sprue cutting by ejector pin in thermosetting plastics injection mould was described.

19. 塑料管道系统。玻璃纤维增强式热固性塑料元件。检验栓接式法兰接头的设计试验方法。

Plastics piping systems. Glass - reinforced thermosetting plastics components. Test methods to prove the design of bolted flange joints.

20. 前言：利用玻璃纤维套管，解决了热固性塑料制件“底座”成型后从熔接线处开裂的问题。

This article introduces the technological method of using glass fibre tubes to solve the splitting problem from the weld line after the forming of the thermosetting product "pedestal".

21. 碳板材铺层自动化应该可以实现，用热塑性塑料(加热即融)代替热固性塑料(加热不融)也是可能的。

It may also be possible to use thermoplastics (which melt when heated), instead of thermosetting plastics (which do not).

22. 热固性塑料是指在受热或其他条件下能固化或具有不溶(熔)特性的塑料，如酚醛塑料、环氧塑料等。

Thermosetting plastic is defined as heat or other conditions can be solidified or insoluble (melt) properties of plastics, such as Bakelite, epoxy plastic.

23. 用转矩流变仪得到的热固性塑料固化过程中的流动和固化的信息，为制订热固性塑料的固化工艺提供科学依据。

Datas obtained by torque rheometer should be considered as a scientific basis to determine the process parameters for thermoset plastics.

24. 塑料管道系统。玻璃纤维增强式热固性塑料元件。检验带有弹性密封件的刚性锁定管座套筒接头设计的试验方法。

Plastics piping systems. glass - reinforced thermosetting plastics components. test methods to prove the design of rigid locked socket - and - spigot joints with elastomeric seals.

25. 由于纤维取向、去除飞边和流道料损失等是热固性塑料加工中影响成本的主要问题，故着重介绍了降低上述费用的办法。

Attention was paid on how to lower the production costs in the processing of thermosetting plastics, which covered the fiber orientation, removal of burr and sprue runner material loss.

26. 像压缩成型，使用这种方法，形成热固性材料和涉及永久固化塑料模具在高温下和压力。

Like compression molding, this method is used to form thermoset materials and involves permanently curing the plastic in a mold under heat and pressure.

27. 另一类是以热塑性聚苯乙烯泡沫塑料和热固性聚氨酯硬泡为主的有机保温材料，通常认定为可燃性材料。

Another kind is thermoplastic polystyrene foamed plastic thermosetting and rigid polyurethane foams primarily organic heat preservation material, usually identified as combustible materials.

28. 添彩珠光颜料几乎适用于所有热固性和热塑性塑料。

Pearlescent Pigment luster almost apply to all thermoset and thermoplastics.

29. 柔性增强热固性树脂管和增强塑料砂浆管的地下安装惯例（08。

Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.

30. 柔性增强热固性树脂管和增强塑料砂浆管的地下安装惯例（08。

Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.