预聚体用英语怎么说,预聚体的英文翻译


词语导航

基本信息

词语:预聚体

繁体:預聚體

拼音:yù jù tǐ

英语翻译

【化】 performed polymer

分词翻译

预的英语翻译:

beforehand; in advance
【医】 fore-

聚的英语翻译:

assemble; gather
【建】 poly-

体的英语翻译:

body; style; substance; system
【计】 body
【医】 body; corpora; corps; corpus; leukocytic crystals; scapus; shaft; soma
Somato-

翻译例句

1. 讨论了合成预聚体时的影响因素。

The influence factors in the synthesis of the prepolymer are discussed.

2. 制得柔性环氧丙烯酸酯预聚体。

A flexible epoxy acrylate resin prepolymer was prepared.

3. 本文研究了聚氨酯预聚体的合成工艺。

In this study, the synthetic technology of different polyurethane prepolymers was investigated.

4. 他们对预聚体收缩率的变化要求比较高。

They are relatively demanding upon the shrinkage change of performed polymer.

5. 使用该聚氨酯预聚体对环氧树脂进行了改性。

The epoxy resin was modified by the polyurethane.

6. 探讨了封闭的预聚体的解封反应,确定了其解封温度。

The release reaction of blocked prepolymer were discussed and release temperature were determined.

7. 超临界CO2诱导结晶并未引起预聚体官能团的改变。

The functional groups of prepolymer are not changed with supercritical CO2 inducing crystallization.

8. 以聚酯型预聚体和MOCA为原料研制了一种冲床弹簧。

A kind of punching machine spring was developed by using polyester prepolymer, MOCA as raw materials.

9. 对水性聚氨酯预聚体中异氰酸酯基团的容量测定进行了研究。

Content of isocyanate group in waterborne polyurethane prepolymer is tested with acetone as solvent, n-dibutylamine - toluene solution as reaction liquid and ethyl acetate as thinner.

10. 丙烯酸松香与乙二醇二缩水甘油醚酯化合成环氧树脂预聚体。

Prepolymer from acrylic acid rosin and ethylene diglycidyl ether was prepared by esterification between acrylic acid rosin and ethylene diglycidyl ether.

11. 研究了不同乳化剂种类和预聚体滴加速率对微胶囊形貌的影响。

Different emulsifier types and prepolymer dropping rate on impact of microcapsules morphology were investigated in experiments.

12. 采用聚醚多元醇和甲苯二异氰酸酯合成了聚醚型异氰酸酯预聚体。

Polyether-type isocyanate prepolymers are prepared with polyether polyols and tolylene diisocyanate.

13. 改性剂a预聚体中加入AE树脂,可显著提高基体韧性和预浸料室温粘性。

The prepolymer blending with AE resin can increase dramatically its toughness and tack of prepreg under room temperature.

14. 讨论了三种封闭剂不同加量、温度和时间对聚氨酯预聚体封闭反应的影响。

The effects of the amounts of three blocking agents, temperature and time on blocking reaction for prepolymer are discussed.

15. 研究结果表明,适量的催化剂能明显加快聚氨酯(PU)预聚体的反应速率;

The results showed that adequate catalyst can obviously raise the reaction speed of polyurethane(PU)prepolymer.

16. 通过VPO,NMR,IR测试了聚醚预聚体的分子量,磺酸聚醚的磺化度。

With VPO, NMR, IR, the number average molecular of polyether and sulfonation degree of sulfonated polyether were characterized.

17. 分析了吸水剂对预聚体气泡的影响,找出了吸水剂的最佳用量及最佳加入方式。

The water-absorber effects on bubbles of prepolymer are analyzed too. It has found the best amount of water-absorber and the best style in use.

18. 以封闭型预聚体和含羟基预聚体为主要原料制备得单组分聚氨酯(PU)胶粘剂。

One-component PU adhesives were prepared from the blocked prepolymer and hydroxyl group-containing prepolymer.

19. 详细叙述了用气相色谱法测定聚氨酯预聚体中微量游离tdi的操作方法和技巧。

The article gave a minute description of operational method and skill in measuring trace free TDI in polyurethane prepolymer by gas chromatography.

20. 用含有异氰酸酯基的预聚体对热塑性淀粉材料(T PS)表面进行了疏水化处理。

The surface of thermoplastic starch(TRS) is hydrophobicated with prepolymers having —NCO groups.

21. 本文利用商业级的聚氨酯预聚体和有机粘土成功制备了聚氨酯基粘土纳米复合材料。

A polyurethane matrix nanocomposite has been successfully fabricated using a commercial grade polyurethane prepolymer and organoclay powders, with the aid of a solvent and supersonic treatment.

22. 以苯酚、甲醛为主要原料 ,合成了满足要求的酚醛树脂预聚体 (PFRFPS)。

Phenolaldehyde resin prepolymer (PFRFPS) meeting the demands was synthesized from phenol and formaldehyde.

23. 考察了活性单体、预聚体及偶联剂对紫外光固化胶粘剂的粘接强度、体积收缩的影响。

The effect of active monomers, oligomers and couple agent on shear strength and volume shrinkage of UV-curing adhesive was investigated.

24. 采用本发明的聚氨酯预聚体作为交联剂,通过常规自由基 溶液聚合就可制得水凝胶。

The polyurethane cross-linking agent has a structural formula (I) and can be used for preparing aquagel.

25. 对合成预聚体的结构进行了表征,并对预聚体及其丙烯酸聚氨酯涂料的性能进行了研究。

The structure of the prepolymer is characterized. The properties of prepolymer and its acrylic polyurethane coatings are discussed.

26. 研究了PEG分子量、交联剂用量、制膜溶剂及预聚体溶液中水含量对膜透湿性的影响。

The effects of molecular weigh (Mn) of PEG, the usage of cross link agents, solvents and water in the solution on the moisture permeation of PU membrane have been studied.

27. 由多异氰酸酯PAPI与蓖麻油反应制得预聚体清漆,它是一种湿固化型聚氨酯防腐涂料。

The polyurethane prepolymer clear coatings based on PAPI and castor oil was prepared. It is a sort of moisture curable one-component polyurethane coatings, which has protection function.WWw.WenTIyi.CoM

28. 结果表明,光交联过程及固化膜中剩余双键含量与预聚体的性质及交联剂官能团的性能有关。

The photocrosslinking process and the amount of residual unsaturation in the cured film were shown to depend primarily on the nature of prepolymer and on the functionality of crosslinking agents.

29. 采用红外吸收光谱图和透射电镜表征了醇酸树脂、有机硅预聚体以及醇酸-有机硅嵌段共聚物。

The alkyd resin, silicone prepolymer and alkyd-silicone block copolymer were characterized bv use of iR and SEM.

30. 采用红外吸收光谱图和透射电镜表征了醇酸树脂、有机硅预聚体以及醇酸-有机硅嵌段共聚物。

The alkyd resin, silicone prepolymer and alkyd-silicone block copolymer were characterized bv use of iR and SEM.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!