
词语导航
基本信息
词语:传热单元
繁体:傳熱單元
拼音:chuán rè dān yuán
英语翻译
【化】 heat transfer unit (HTU)
分词翻译
传热的英语翻译:
【化】 heat transfer; heat transference; heat transmission
thermal transmission
单元的英语翻译:
cell; unit
【计】 cell; LOC; U
【化】 element
【医】 element
翻译例句
1. 本文基于传热单元法,建立了冷凝器的稳态分布参数模型。
Based on the, a steady state distributed parameters model was put forward in the numerical simulation of refrigerant circuitry in condensers in this paper.
2. 指出为取得较高的(火用)效率,传热单元数和水当量比应仔细选择,它们有一最佳值。
The results show that in order to obtain higher exergy efficiency number of transfer unit(NTU)and capacitance ratio should be selected carefully for they have optimum values.
3. 在PSSP系统上建立传热单元仿真模型应以提供传热单元培训服务为目的,针对性要强,满足用户的要求。
It should take thermal conductivity unit training as purpose to set up simulating model for a thermal conductivity unit in PSSP system, with strong aims and satisfying demands of users.
4. 讨论了传热单元数、冷热流体热容量比和流型对换热器传递有效度的影响,并把换热器传递有效度和效率以及换热器无因次熵产数进行了比较。
The effects of heat transfer units number, heat capacity ratio of fluids and flow patterns on exergy-transfer effectiveness are discussed. The comparison among exergy -...
5. 本文主要以广泛应用的板翅式机油换热器为研究对象,以锯齿形翅片为传热单元,以优化设计理论为基础,应用ANSYS软件对锯齿形翅片进行优化。
In this paper, the study was focused on plate-fin oil cooler whose heat transfer element is hackle fin, and used ANSYS software to optimize the hackle fin on the basis of optimization theory.
6. 应用abaqus软件的强制对流单元,研究了在特定的气体流动条件下的钢卷与气体之间的传热。
By using ABAQUS software, force convection elements were adopted to simulate the heat transfer between the coil and the forced convective hydrogen.
7. 本文运用边界单元法对低肋管的强化传热效能进行了数值计算。
A numerical calculation of enhanced heat transfer efficiency of LFT is finished in this paper by the boundary element method.
8. 利用该模型可以在缺乏相间传热系数的情况下,计算出最小液-汽比及传质单元高度HTU。
The minimum liquid—vapor ratio and the Height of Mass Transfer Unit "HTU" can be obtained in lack of interphase heat transfer coefficient by the model.
9. 本文对吸收与传热这两个化工单元操作进行了类比,着重分析两者之间的相似之处和主要差异。
In this paper analogy has been made between the two unit operations, absorption and heat transfer, in chemical industry.
10. 提出了传热与传质单元法间存在类似的概念。
The idea that the analogy exists between heat and mass transfer unit methods is proposed.
11. 用MATLAB计算食品过程中的物料平衡含水量、气体吸收的传质单元数和传热过程的调节,研究基于MATLAB的非线性方程、非线性方程组的求解和数值积分功能的应用。
The equilibrium water content of the solids for drying, the number of mass transfer units for gas absorption and mass flow rate for heat transfer system were obtained using MATLAB.
12. 通过数值计算和由吸附单元管组合而成的吸附床的性能初步试验,证明该结构形式的吸附单元管具有优良的传热传质性能。
The simulations on the tube and the primary experiments on the adsorber combined by the unit tubes indicate that the heat and mass transfer performance of the adsorption unit tube is very good.
13. 本实用新型公开了一种双二级热管式太阳能热水器,包括集热单元(4)、传热单 元以及水箱(3)。
The utility model discloses a dual-two-stage-heat pipe solar water heater comprising a heat collection unit (4), a heat transfer unit and a water tank (3).
14. 本文根据传热学的基本原理,采用冷却单元计算法推导得到了一套完整的关于扁圆管单面贴壁冷却方式的理论计算方法。wWW.WENtIYI.COm
In this paper a theoretical calculation method of one-side cooling of flattened tube welded on a wall was obtained by calculation of cooling elements.
15. 流体搅拌是化工工业过程中重要的单元操作,在要求传热面较大、工作介质为高粘体系或某些气液两相体系等工业过程中,多层桨搅拌槽被广泛应用。
Stirred vessels are used in the process industries for a variety of applications. Multiple-impeller stirred tank is widely used in process such as gas-liquid dispersion, high viscous fluid mixing.
16. 流体搅拌是化工工业过程中重要的单元操作,在要求传热面较大、工作介质为高粘体系或某些气液两相体系等工业过程中,多层桨搅拌槽被广泛应用。
Stirred vessels are used in the process industries for a variety of applications. Multiple-impeller stirred tank is widely used in process such as gas-liquid dispersion, high viscous fluid mixing.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
