内压圆筒用英语怎么说,内压圆筒的英文翻译


词语导航

基本信息

词语:内压圆筒

繁体:內壓圓筒

拼音:nèi yā yuán tǒng

英语翻译

【化】 internal pressure cylinder

分词翻译

内的英语翻译:

inner; inside; within
【医】 end-; endo-; ento-; in-; intra-

压的英语翻译:

intimidate; keep under control; press; push down; shelve; suppress
【医】 prelum; pressure

圆筒的英语翻译:

cylinder
【化】 drum

翻译例句

1. 应用可靠性设计方法,对压力试验时钢制薄壁内压圆筒形容器初始静强度的最小可靠度进行了定量分析。

By using reliability design method, the reliability range of virgin static strength of spherical vessel was quantitatively analyzed under the most severe pneumatic and hydraulic test conditions.

2. 应用可靠性设计方法,对压力试验时钢制薄壁内压圆筒形容器初始静强度的最小可靠度进行了定量分析。

By using reliability design methods, minimal reliability of virgin static strength of steel thin wall cylinder during pressure test is quantitative analyzed.

3. 本文给出了一种分析受冲击内压作用的厚壁圆筒中位移和应力的解析方法。

This paper presents an analytical method which analyses displacements and stresses in thick cylinders subjected to internal impulsive pressure.

4. 本文基于脉动内压疲劳试验结果,对厚壁圆筒构件的动态自增强原理进行了分析研究。

Based on the results obtained from fatigue tests under pulsating internal pressure, the mechanism of dynamic autofrettage of thick wall-cylinder components is studied in this paper.

5. 对于均质连续岩体,通过模拟围岩抗力,可以仅取衬砌及其附近围岩作为分析对象,将水工压力隧洞应力分析转化为受内、外压的厚壁圆筒。

When the hydraulic pressure tunnel is pressed by water, the concrete of tunnel transfers the pressure to the surrounding rock mass, and it also is pressed by the rock reaction force at the same time.

6. 通过对钢制内压球形封头和圆筒形容器的应变测量及应力进行分析,发现了数据中存在的一些问题。

By measuring the strain of the steel internal pressure vessel which has a hemispherical head and a cylindrical shell, analyzing the stress, we discover the data exists the problem.

7. 运用应力分析理论进行了内压薄壁圆筒的强度设计。

According to the theory of stress analysis, the intensity design of the thin-skinned internal pressure cylinder is analyzed in this article.

8. 基于应变梯度塑性理论,分析了内压作用下厚壁圆筒和球壳的塑性极限荷载。

Plastic limit load of viscoplastic thick-walled cylinder and spherical shell subjected to internal pressure is investigated analytically using a strain gradient plasticity theory.

9. 本文运用莫尔屈服准则对承受内压的拉压屈服强度不同材料的厚壁圆筒进行了自增强分析,得到了依赖于材料拉压比的厚壁圆筒的最佳弹塑性界面半径、最佳自增强内压。

This paper makes the optimum autofrettage analysis of thick-walled cylinder of the material with different yield strength in tension and compression base on the Mohr"s yield criterion.wWW.wEnTIYi.COM

10. 本文运用莫尔屈服准则对承受内压的拉压屈服强度不同材料的厚壁圆筒进行了自增强分析,得到了依赖于材料拉压比的厚壁圆筒的最佳弹塑性界面半径、最佳自增强内压。

This paper makes the optimum autofrettage analysis of thick-walled cylinder of the material with different yield strength in tension and compression base on the Mohr"s yield criterion.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!