槽形的用英语怎么说,槽形的的英文翻译


词语导航

基本信息

词语:槽形的

繁体:槽形的

拼音:cáo xíng de

英语翻译

【医】 alveated; alveolate; channelled

相关词条

1.channeled  

分词翻译

槽的英语翻译:

chamfer; gutter
【计】 slot
【化】 channel
【医】 alvei; alveus; crib; gutter; slot; socket; tank; trough

形的英语翻译:

appear; body; compare; entity; form; look; shape
【医】 appearance; morpho-; shape

翻译例句

1. 对于要求同时检测矩形或接近矩形槽形的全息光刻胶光栅掩模的槽深和占宽比,该方法完全适用。

The method is qualified for measurement of groove depth and duty cycle simultaneously for the rectangle-shaped or similar profile of holographic grating mask.

2. 作者在试验基础上提出了一种用于循环流化床锅炉中的新型冲击式槽形管惯性分离器,它具有高效率、低阻力等优点。

Based on experimental test, a new impact type inertia separator with fluted tubes, with high efficiency and low pressure drop, used for circulation fluidized bed boilers is proposed by authors.

3. 传感器外壳上的圆形安装孔(非槽形)可避免由于错误的安装距离或运动而导致的碰撞或震动引起的维修。

Round mounting holes (not slots) in the sensor housing avoid incorrect mounting distances or movement through impact or vibration which otherwise may require maintenance.

4. 这样形成的凹曲线在运行中有使皮带脱离槽形托辊和机架形成的轨迹,结果造成大问题。

Concave curves in conveyors have the tendency to lift the conveyor belts out of the curves and the troughing idlers, resulting in Big Problems.

5. 用途:适用于电动工具、串励电机、无钩槽形换向器的自动绕线。

Usage: suitable for automatic wire winding of electric tool, series motor, slot type no hook commutator.

6. 用途:本用适用于开口槽双圈电枢绕组成W形后的自动嵌线。

Usage: suitable for automatic wire embedding of open slot double coils armature winding that shaped to W shape.WWW.WEntIyI.cOM

7. 进一步计算结果表明含铁氧体片的脊形波导具有宽频带特性,含铁氧体片的槽形波导具有较大相位移。

Further computation indicates that the ferrite slabs loaded ridged waveguide has broadband frequency properties and the grooved waveguide has greater differential phase shift.

8. 单头“W”形螺旋槽管是在螺旋槽管的基础上开发出的一种新型强化管。

The results show that comprehensive performance of "W" type spirally fluted tube is better than that of smooth tube.

9. 横向截形是麻花钻螺旋面容屑槽的一个特征参数。

Drill cross section profile (DCSP) is a characteristic parameter of drill helix flute form.

10. 指出在头部滚筒作为驱动滚筒的布置系统中,胶带最大应变、力及张力位置不在驱动滚筒相遇点,而在过渡段第一组槽形托辊处。

It points out that the position of the maximum strain, stress and tension is at first group trough type roller, not at passing poion of pulley if the head drum works as pulley.

11. 观察上颌前部牙槽骨内圆柱洞形扩宽后行同期人工牙种植的临床效果。

To investigate the clinical effects of dental implantation after column hole shape endosseous expansion in alveoli of anterior maxilla.

12. 形刻槽爆破是指在炮孔孔壁上按爆破开裂方向,切出一定深度的轴向对称V形槽,采用不耦合装药结构进行的一种断裂控制爆破。

V-shaped notch blasting is that cutting slots with certain depth along axis -direction of the hole is determined according to the blast-crazing, and then load uncoupled charge and detonation.

13. 当此槽形线底部与中心圆柱的轴线间的距离趋于无限大时,我们即得到人的所熟知的两平板间具有中心内导体的传输线的结果。

When the distance between the axis of the inner conductor and the bottom of the trough tends to infinity, the results obtained in this paper go into that of the well-known slab line.

14. 采用近似场论的方法,获得了一种分析任意槽形螺旋槽结构的普遍理论。

A theory for the analysis of the arbitrarily-shaped helical groove structure is obtained by means of an approximate field-theory.

15. 方法三棱滑切固定矫治器的结构,以三棱形弓丝和具有三角槽沟的托槽为主体,由它控制矫治牙在各个方向的移动而发挥矫治作用。

Methods the structure of deltoid arch wire fixed appliance is consist of deltoid arch wire and bracket with deltoid colpus. It is used to control the tooth"s moving.

16. 它们造成的特殊危害分别有塌陷地震、形成槽形移动盆地和产生崩塌、滑坡。

The ground subsidence causes the special damages: earthquake of collapse, forming of moving trough basin and rock falling and slipping.

17. 形密封圈和密封圈槽尺寸的合理匹配是延长密封圈无泄漏密封寿命的必要保证。

Rational matching of O-rings and O-ring grooves is of great importance to prolonging the service life of O-rings.

18. 在保证分离效率的前提下,槽形和角形分离件具有流动阻力小的特点。

Warranting the required separation efficiency, trough and angular type separators are featured by low flow-resistance.

19. 分析了电压型逆变器供电的永磁同步电动机对定子漏抗的要求,确定了电磁负荷以及定子槽形等参数的选取原则。

The requirement for leakage reactance on stator of PMSM supplied by voltage type inverter is analyzed, and some parameters are selected, such as electromagnetic load, slots shape of stator and so on.

20. 如图中箭头所示:槽形托辊组成中对皮带运行有实质影响的唯一部分就是中心托辊。

The only part of the troughing idler that hs any training effect on the conveyor belt is the center roll indicated by the arrow.

21. 每一低定量区域具有至少一个对应于突起中槽的高定量半岛形部分。

Each low basis weight region has at least one high basis weight peninsular segment corresponding to the slot in the protuberance.

22. 设计者只要输入立铣刀的槽形参数,计算机便可自动计算出成形铣刀廓形坐标并绘制出刀具廓形图。

So long as designers input slot section parameters of end cutter, the coordinate of formed milling cutter profiles is calculated automatically, and cutter profile graph is drawed by computers.

23. 在结构上采用了三翼四齿的钻头体、弧槽形排粉沟槽,适用于硬、中硬、软岩的三种齿形。

The drill bit body has three wings four cylindrical tungsten carbide inserts and curved slots for removal of cuttings.

24. 麻花钻切屑槽的螺旋形布局对钻头的刚度和强度有很大的影响。

The spiral composition of the chip flute of the twist drill has great influence on the rigidity and intensity of drill.

25. 槽型玻璃是一种用玻璃浇铸而成的半透明板材,截面可以是I形或是U形,排列起来能够营造出一种自发的超然和瞬间的梵境。

Channel glass is a translucent cast-glass panelized material, I-shaped or U-shaped in profile, that in array provides spontaneous transcendence and instant karma.

26. 论述了双T形转子轮槽加工中所用成形车刀的设计方法及制造时关键要点。

The design method of forming lathe tool for machining double T-shape rotor wheel groove was discussed in this paper and finally the keys for manufacturing are illuminated.

27. 复合笼条转子感应电动机转子采用特殊的槽形,且槽中含有铸铝和铜铁合金两种材料。

The special slot is adopted in the rotor of the induction machine with compound cage rotor and there is two materials of casting aluminum and copper iron alloy in the slot.

28. 目的观察纵槽横沟固位形修复楔状缺损的效果。

ObjectiveTo investigate the effects of securing longitudinal-socket-transverse fissure(LSTF) fixtures on wedge-shaped defect(WSD) rehabilitation.

29. 在分析环槽形内侧凹塑件结构特点及模具设计方案的基础上,设计了此类塑件的注射模。

Based on the analysis of the structure characteristics of the plastic product with inner concave loop slot and the mold design projects, an injection mold for this kind of part was designed.

30. 在分析环槽形内侧凹塑件结构特点及模具设计方案的基础上,设计了此类塑件的注射模。

Based on the analysis of the structure characteristics of the plastic product with inner concave loop slot and the mold design projects, an injection mold for this kind of part was designed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!