
词语导航
基本信息
词语:加速杆
繁体:加速桿
拼音:jiā sù gān
英语翻译
【机】 accelerator rod
分词翻译
加速的英语翻译:
accelerate; quicken; crack on; gather way; pickup; speed
【计】 accelerating; increase speed; speed-up
【医】 acceleration; auxo-
【经】 accelerate; prompt; speed up
杆的英语翻译:WWw.WeNTiYI.Com
mast; perch; pole; post; shank; staff
【化】 bar
【医】 culm; lever; rhadbo-; rod; stab; staff; stick
翻译例句
1. 汽车并没有加速杆,在陆地上驾驶时可以通过刹车和油门踏板进行控制,它有一个像普通汽车一样的方向盘。
It doesn"t have a gearstick, but on the road can be controlled with brake and accelerator pedals and a steering wheel like an ordinary car.
2. 司机可以利用操纵杆之类的来控制方向和速度,这样车辆可以原地旋转并加速得相当快。
Drivers use a joystick of sorts to steer and throttle the vehicle, which can spin in place and accelerates rather quickly.
3. 每一次你让杆完全加速,收杆时把杆完全地收好,这比起小幅度挥杆来说,获得的成绩将更好。
A full acceleration of the club, and a full finish are sure to provide you better results than a shorter swing, every time.
4. 操作简便:助力滑行,后蹬踏动力杆,即可加速滑行,如驾云般飘逸,有骑马般自在。
User-friendly control: glide with the help the dynamic device, speeding by pedaling the pole, then you will be as graceful as clouds and comfortable as riding horses.
5. 通过运动学分析,得出平面变胞机构在一个运动周期中输出杆件的位置、速度和加速度以及平面变胞机构的其他杆件的运动学参数。
Through the kinematic analysis, the positions, speeds and accelerations of the output link as well as the other links of the planar metamorphic mechanisms can be obtained.
6. 建立了一套肘杆机构活动平台加速度测试系统,对MW1050自动烫印模切机空载状态和加压工作状态进行了实测。
A set of acceleration test system of elbow-bar framework is founded for the material test of MW1050 automatic blocking die-cutter while it is load-off or not.
7. 气门杆间隙过大会加速气门的积炭。
Excessive valve-stem clearance speeds up valve deposits.
8. 基于回路法建立了模切机双肘杆施压机构的运动数学方程,并绘出了双肘杆机构部分构件位移、速度、加速度的运动曲线。
Built up the sport mathematics equation of the elbow pole organization based on the loop method, and drew its displacement, velocity and acceleration exercise curve.
9. 然后,针对能够整周转动的齿轮—五杆机构,研究了其上的一点在齿轮机构的传动比、初始相位角、杆长以及两杆之间的夹角变化时的轨迹曲线以及速度和加速度曲线的情况。
Then the locus curves of one point in the geared five-bar were studied with the change of the gear ratio, the phase Angle, the bar length and the Angle between two bars.
10. 保持厂商指定的轮胎膨胀度,稳定加速,少用变速杆,用稳定的速度行驶都可以轻松提高MPG。
You can easily improve the MPG on any car by keeping tyres inflated to their manufacturer-specified pressure, employ steady acceleration and drive at a steady speed that requires fewer gear changes.
11. 在分析行星轮与内齿环各段啮合情况的基础上,建立了行星齿环换向机构中系杆的角速度和角加速度计算模型。
Based on the meshing analysis of planetary gear and inner gear-ring, the angular velocity and angular acceleration calculation model of the rod is established.
12. 在此基础上,讨论了机构参数对齿环滑块的速度和加速度、系杆的角速度和角加速度的影响。
And based on this condition, there is a discussion on the effect to the slider"s velocity, acceleration, and rod"s angular velocity and angular acceleration caused by mechanism parameters.
13. 总结了瞬心法求解平面四杆机构角加速度、加速度的难点,并找到了一种简便、通用的解决方法。
This paper sums up the difficulty of solving Angle acceleration and acceleration of planar four-bar linkage mechanisms by using center of speed method, and finds a simple method for all purposes.
14. 系杆的角速度和角加速度是计算系杆刚度的重要依据。
The angular velocity and angular acceleration of the rod are important basis to calculate the rigidity of the rod.
15. 分析了一种三杆五自由度并联机床机器人运动学问题,给出了其运动学正逆解位置方程,并对并联机床的速度及加速度求解进行了定性分析。
The degree of a 3-legged in parallel kinematics machine tool is analyzed. Its positive and inverse kinematics is presented and its velocity and accelerate were qualitative analyzed.
16. 采用高精度丝杆及导轨,保证精确定位,加速度快,使用简便,性能稳定,价格经济,应用广泛。
Adopting high precision lead screw and guide rail to ensure accurate positioning, it has advantages of faster speed, easy operation, stable performance, favorite price and wide application.
17. 采用高精度丝杆及导轨,保证精确定位,加速度快,使用简便,性能稳定,价格经济,应用广泛。
Adopting high precision lead screw and guide rail to ensure accurate positioning, it has advantages of faster speed, easy operation, stable performance, favorite price and wide application.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
