等离子弧切割用英语怎么说,等离子弧切割的英文翻译


词语导航

基本信息

词语:等离子弧切割

繁体:等離子弧切割

拼音:děng lí zǐ hú qiē gē

英语翻译

【化】 plasma(arc)cutting

分词翻译

等离子的英语翻译:

【电】 plasmon

弧的英语翻译:

arc
【化】 arc
【医】 arc

切割的英语翻译:

incise; incision

翻译例句

1. 普通等离子弧切割机的电源。

Ordinary plasma arc cutting machine power supply.

2. 精细等离子弧切割。

Fine plasma arc cutting.

3. 有时氮气还被用作氧等离子弧切割时的起弧气体。

Sometimes nitrogen are being used oxygen plasma arc cutting of arcs gas.

4. 空气等离子弧切割工艺是值得推广的热切割新技术。

The air plasma arc cutting technology is worthy to popularize a new thermal cutting technology.

5. 对双相不锈钢进行热切割应该仅限于等离子弧切割方法。

For duplex stainless steel thermal cutting shall be limited to the plasma arc method.

6. 本文介绍了逆变式等离子弧切割机的工作原理、使用方法和维修措施。

The principle, operation and repair of invert plasma are cutting machine are introduced in this paper.

7. 为减小切口宽度,提高切口质量,进行了水再压缩等离子弧切割陶瓷实验研究。

To reduce the kerf width and to improve the kerf quality, the experiments of ceramic cutting with water constricted plasma arc are carried out.

8. 数控等离子弧切割机是典型的机电一体化设备,它综合应用了相关各门技术的最新科研成果。

NC plasma cutter is typically a mechanical and electrical integrated equipment, which applies the latest scientific and research results in each technological area concerned.wWw.wentIYi.Com

9. 根据不同的主要气体,主要分为氩等离子弧切割划分,氧气切割和等离子弧切割,空气等离子弧的类型。

According to the different main gas, mainly divides into argon plasma arc cutting division, the oxygen plasma arc cutting and cutting, air plasma arc type.

10. 本文就小电流空气等离子弧切割工艺的特性、切割质量、切割设备、存在问题和应用情况作了综合介绍。

The article introduces synthetically technological properties, cutting quality and equipment, the present problems and the applied condition for low-current air plasma cutting.

11. 现在的等离子弧切割机大多靠气体压力来控制流量,因为当枪体孔径一定时,控制了气体压力也就控制了流量。

Now the plasma arc cutting machine part on gas pressure to control the flow, because when gun aperture, the gas control certain pressure and you control the flow.

12. 本文介绍了KLG - 50型空气等离子弧切割机的主回路,控制电路和程序控制电路的工作原理及调试结果。

The principle and adjustment result re of the main circuit, control circuit and program control circuit of our KLG-50 plasma arc cutting machine are introduced in this paper.

13. 血浆高速等离子弧切割技术工程热金属削减部分熔融,并与高流量同样会被熔化的金属吹走,形成一个狭窄的切口。

High-speed plasma arc cutting technology plasma engineering hot metal cutting, and partial melting with high flow will also be the molten metal blow, form a narrow incision.

14. 调节为基础,利用快速可控硅做开关元件,研制的一台新型等离子弧切割电源——输出直流100a逆变切割电源。

M. adjusted, by the use of high speed SCR gate, a new convening power source with output of 100a for plasma are cutting is developed.

15. 分析了LGK系列空气等离子弧切割机的使用方法,例举了其引弧故障、主电路故障、气路故障、割枪故障产生的原因和解决方法。

This paper analyses the usage of LGK series of air plasma arc cutting machine, and enumerates the causes and solutions of striking arc, main circuit, gas path and cutting torch breakdown.

16. 分析了PC - 60型空气等离子弧切割机的基本结构、工作原因、使用方法和注意事项;例举了其常见故障现象、产生原因和排除方法。

This paper analyzes the basic structure, work principle, usages and notice items of PC-60 air plasma arc cutting machine, and lists the common trouble phenomena, causes and solutions.

17. 这个能量释放的不平衡,与很多工艺参数密切相关,如等离子弧压缩程度、切割速度及喷嘴到工件的距离等。

This energy release imbalance, closely related with many process parameters, such as plasma arc compression degree, cutting speed and nozzle to the distance, etc.

18. 但氩气等离子弧的电压较低,焓值不高,切割能力有限,与空气切割相比其切割的厚度大约会降低25%。

But the argon plasma arc voltage, low enthalpy is not high, cutting ability is limited, and cut the air than the thickness of the cut about 25% lower.

19. 科研项目空气等离子水再压缩弧切割技术获国家科技进步二等奖。

The arc cutting technique of air plasma water re-compressed won the second prize of National Scientific and Technological Progress Award.

20. 本文的最后部分对等离子体弧切割变厚度板材进行实验研究。

In the finality of this article an experiment study about plasma arc cutting variable-thickness plate is introduced.

21. 结果表明,施加水再压缩对提高等离子弧柱的能量密度和稳定性、进而提高陶瓷件切割质量非常有效。

It is shown that the water constriction is effective on improving the energy density and stability of the arc, so the cutting quality can be improved also.

22. 等离子体弧切割是通过高温等离子体弧将工件弧柱部分的材料熔化并利用高速离子流将切渣吹除的物理过程,弧柱的功率和作用力将直接影响到切口质量。

Plasma arc cutting is a physical process which utilize high temperature to heat materials and high speed flow to blow melted metal, cutting quality is directly influenced by arc power and arc force.

23. 过小的气体流量则使等离子弧失去应有的挺直度而使切割的深度变浅,同时也容易产生挂渣;

The too small gas flow makes plasma arc lost due to the degree and straight cutting depth becomes shallow, but also easy to produce hang slag;

24. 针对螺旋埋弧焊钢管生产中空气等离子切割烟尘对环境污染的问题,设计了一种工作稳定可靠的烟尘净化系统。

Environment pollution problem generated by plasma cutting smoke and dust during SSAW pipe production process was analyzed; a kind of stable and reliable smoke and dust cleaning system was designed.

25. 预留等离子切割机电源接口,可选配各种等离子切割机机型,弧压跟踪系统以及初始定位装置。

Plasma cutting machine interface reserved; optionally set up all types of plasma cutting machine and arc voltage tracking system, including initial position and automatic arc voltage tracking system.

26. 针对原等离子切割机存在的起弧困难和小弧到大弧的转移不连续的缺点,对原控制装置硬件结构和控制线路进行技术改造,使用结果表明:该装置运行可靠,起弧容易,控制效果好,并且提高了生产效率。

The author discusses the faults of the existing plasma cutting machine, difficulty to start arc and to transit from minarc to maxarc, then puts forward a new control scheme based on technical desires.

27. 结果表明,施加水再压缩对提高等离子弧柱的能量密度和稳定性、进而提高陶瓷件切割质量非常有效。

It is shown that the water constriction is effective on improving the energy density and stability of the arc, so the cutting quality can be improve...

28. 瀚金电气的产品包括:IGBT逆变直流弧焊机,IGBT逆变直流空气等离子切割机,电阻焊机,焊接送丝机等焊接与切割设备。

The products of HJ electric are IGBT inverter DC arc welders, IGBT inverter DC air plasma cutting machine, resistance welders, welding wire feeder and other welding and cutting equipment.

29. 瀚金电气的产品包括:IGBT逆变直流弧焊机,IGBT逆变直流空气等离子切割机,电阻焊机,焊接送丝机等焊接与切割设备。

The products of HJ electric are IGBT inverter DC arc welders, IGBT inverter DC air plasma cutting machine, resistance welders, welding wire feeder and other welding and cutting equipment.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!