钎焊合金用英语怎么说,钎焊合金的英文翻译


词语导航

基本信息

词语:钎焊合金

繁体:釬焊合金

拼音:qiān hàn hé jīn

英语翻译

【化】 brazing alloy

相关词条

1.solderalloy  2.brazingmetal  

分词翻译

焊的英语翻译:

solder; weld
【电】 soldering

合金的英语翻译:

alloy; metal
【化】 alloy
【医】 alloy
【经】 alloy

翻译例句

1. 在安装连接部件时,可以看到焊料和钎焊合金继续流动。

When joint is filled, a continuous run of solder or brazing alloy will be visible.

2. 例如该钎焊合金可以以单种均质钎焊合金的形式使用。

The braze alloys can be used, for example, as a single homogenous braze.

3. 本发明公开了一种陶瓷与钢焊接用高温钎焊合金焊料及其制备方法。

The present invention discloses an alloy soldering flux for high-temperature soldering ceramics and steel, and its preparation method.

4. 铜硬钎焊散热器制造工艺技术的核心是无焊剂、无铅钎焊合金以及抗退火材料。

The key technology of radiator manufacture by Cup ro Braze is not necessary to use flux, kupper solder and annealing resistance mate rial.

5. 因为银钎焊合金并不会流过或粘接在氧化物上,而油污的表面及暴露的、容易氧化和导致空隙和杂物排斥焊剂。

Silver brazing alloys will not flow over or bond to oxides. Oily or greasy surfaces repel fluxes, leaving bare spots which oxidize and result in voids and inclusions.

6. 钎焊铜及铜合金、银、钼等金属。

Brazing of copper, copper alloys, silver and molybdenum etc.

7. 用于做钎焊铜及铜合金,易加工,塑性好,具有良好的浸润性。

The product is used for brazing copper and copper alloy, easy processing, plastic, with good infiltration.

8. 钎焊铜及铜合金。

Brazing of copper and copper alloys.

9. 文章介绍了一种采用低温铝钎焊料和钎焊技术的铝合金外壳基板钎焊和密封方法。

Techniques for soldering and encapsulating aluminum-alloy case and substrate based on low-temperature aluminum soldering materials are described in the paper.

10. 通过对硬质合金、截齿体材质、焊缝间隙、钎焊及热处理工艺的研究,寻找出了研制优质强力截齿的技术途径。

The technology of developing quality and strong pick is found by researching the hard metal alloy, pick-body material, weld gap, technique of braze welding and heat treatment.

11. 钎焊铜及铜合金。

Brazing of copper copper alloys.

12. 由于钎焊是表现在温度与热短程,应变必须避免在钎焊和冷却这一合金。

Since brazing is performed at temperatures within the hot-short range, strain must be avoided during the brazing and cooling of this alloy.

13. 分析了硬质合金微型钻头加工时的受力状态,根据钎焊硬质合金刀具的强度指标要求,研究了刀具焊接强度的检测方法。

The cutting loads of cemented carbide drilling tool in drilling PCB are analyzed, a method applied to testing the brazing strength of cemented carbide cutters is studied.

14. 本厂主要从事焊锡制品的生产和销售,铝铜合金的火焰钎焊或者高频钎焊材料。

Solder factory is mainly engaged in the production and marketing of products, aluminum copper alloy brazing flame or high-frequency brazing material.

15. 该合金是一种较理想的定向和单晶高温合金用的钎焊料。

This alloy is an ideal brazing filler suitable to the directional or singlecrystal superalloys, and the elements are beneficial to superalloys at all.

16. 针对2A50铝合金的特点,根据铺展性、填缝性试验,对适合其钎焊的钎料与钎剂作了选择,进行了接头强度试验。WWw.WEnTiYI.COM

The filler metals and fluxes suitabled for 2A50 aluminum alloy brazing were selected according to the feature of 2A50 aluminum alloy and the test of spreadability and clearance fillabitity.

17. 硬质合金钎焊后进行淬火、回火处理,焊缝强度明显下降。

After cemented carbide brazed is quenched and tempered, the strength of welding stam descend obviously.

18. 按合金组份配制的原料用氧化铝坩埚在真空中频感应炉中熔键成方坯条,再轧制成丝坯,最后拉制成钎焊丝材。

The Starting material is melted and poured into the quadrate billets, then rolled out in wire rods, finally drawn into brazing wire.

19. 研究了采用钎焊方法,在空气加热炉中实现PTC陶瓷材料与铝合金的连接问题。

Brazing process between PTC ceramic and aluminium alloy within air heated furnace is studied.

20. 采用先在钎缝间隙中预填合金粉,然后在钎缝外置放钎料进行钎焊的方法,解决不锈钢接头宽间隙的钎焊问题。

The braze of stainless steel joints with wide clearance is made by pre filling alloy powder into the gap.

21. 许多电子制造商将在2006年前从传统的锡铅合金钎焊工艺改变为无铅合金的钎焊工艺。

Many electronics manufacturers will transition their soldering processes from traditional tin-lead alloys to lead-free alloys before 2006.

22. 针对硬质合金在钎焊冷却过程产生很大的热应力而导致钎焊裂纹这一问题,采用有限元分析方法对硬质合金圆环与钢基体钎焊时冷却过程中的残余应力的分布情况进行模拟。

Aiming at brazing crack induced by thermal stress during the process of brazing, finite element method was used to analyze the residual stress of joints between the cemented carbide cirque and steel.

23. 本文根据置氢TC4钛合金组织以及性能特点,对其进行了钎焊连接。

In this paper, the mechanism and technology of brazing hydrogenated TC4 titanium alloys were been studied according to its characteristic using three diffenent filler metals.

24. 通过试验研究,探讨了铝锂合金的钎焊性。

Abstract: The Brazeability of Al-Li alloys is studied through experiments.

25. 用于火焰钎焊及铝合金,应用广泛。

For flame brazing and aluminum alloys, a wide range of applications.

26. 铝基钎料适用于铝合金、铝合金与不锈钢之间的钎焊。

It is applicable to the various brazing between aluminum alloy and aluminum alloy, aluminum alloy and Stainless steels.

27. 本文设计了用于钎焊硬铝合金ly 12的低熔点钎料,为实现铝合金在更低的温度下连接提供基础。

In this paper, low-melting filler metals for LY12 aluminum alloy were developed, which can be the foundation of aluminum alloy joining at a lower temperature.

28. Ag55%可以用于各种材料的钎焊,如:钢铁、纯铜、铜合金、镍和镍基合金。

Silver 55% is for use on any steels, copper and copper alloys, nickel and nickel alloys.

29. 采用一定的钎料对铝合金、镁合金进行超声波钎焊能较好提高其接头力学性能。

For both aluminum alloy and magnesium alloy, a sound joint can be obtained under appropriate welding conditions using the process method of ultrasonic brazing.

30. 采用一定的钎料对铝合金、镁合金进行超声波钎焊能较好提高其接头力学性能。

For both aluminum alloy and magnesium alloy, a sound joint can be obtained under appropriate welding conditions using the process method of ultrasonic brazing.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!