活塞裙用英语怎么说,活塞裙的英文翻译


词语导航

基本信息

词语:活塞裙

繁体:活塞裙

拼音:huó sāi qún

英语翻译

【机】 piston skirt

相关词条

1.pistonbottom  

分词翻译

活塞的英语翻译:

piston; plunger
【医】 piston; stop-cock

裙的英语翻译:

skirt

翻译例句

1. 本发明还涉及一种在活塞裙上加工涂层的方法。

A method of applying the coating to the piston skirt is also disclosed.

2. 活塞的主要部分叫活塞裙部。其与气缸壁接触形成了支承面。

The main section of a piston is known as the skirts. It forms a bearing area in contact with the cylinder wall.

3. 典型零件的车削实验表明,该方法能有效地提高非圆活塞裙部的加工精度。

The experiments about a typical piston indicate that this forecast error control method can increase the turning precision clearly.

4. 为提高工作性能,活塞裙部设计成中凸变椭圆型,立体靠模仿形车削是常用的加工方法。

To improve performs of engine, the piston skirt curve is designed to be middle convex and varied elliptic pattern, copying manufacturing with master piston is commonly used.

5. 通过对某大功率机车柴油机活塞裙部喷涂复合材料层后在标定工况下装机进行磨合实验。

In this paper, a grinding experiment on a piston skirt profile coated with compound material in a high-power locomotive diesel engine is carried out under a rating condition.wWW.WEnTiyI.cOM

6. 在对HS- 700型发动机活塞裙部型面深入研究的基础上进行了变椭圆截面设计。

Based on a thorough study of moulding plane of piston skirt of HS-700 type gasoline engine, the design of variety ellipse section is made.

7. 重点介绍了计算活塞裙部型线方程,给出了从图纸到中凸靠模板曲线板型线设计的方法。

The paper mainly introduces the calculating equation for piston skirt molded lines, the drawing of piston, and the design for convexity mother plate molded lines.

8. 探讨了用超声波技术对运用机车柴油机钢顶铝裙活塞裙部裂损进行提前预防的措施和方法。

The precautionary measures to prevent skirt from fracturing, by means of ultrasonic flaw detection technology, are discussed.

9. 金属洗涤剂和无灰分散剂系统提供的环带和活塞裙存款优越的控制,即使在最严酷的工作条件。

Metallic detergent and ashless dispersant additive system provides superior control of ring belt and piston skirt deposits, even under the most severe operating conditions.

10. 因此,研究活塞裙部型面的设计,寻求一种先进合理的活塞裙面设计方法,具有重要的意义。

Therefore, it is of great significance to research on the piston skirt profile design and to find an advanced reasonable piston skirt surface design method.

11. 绝不能使用苛性溶液或金属刷清除活塞表面的积碳和漆膜。因为这样会损坏活塞裙部的粗糙度。

Piston cleaning. Remove carbon and varnish from piston surfaces. Do not use a caustic cleaning solution or a wire Brush. These could damage the piston-skirt finish.

12. 为查明活塞裙破断的原因,对活塞裙的断口、材质、装配应力、应力集中情况等进行了分析研究。

Analysis has been made on the fracture, material properties, assem-bling stress, stress concentration and etc. in order to find the cause of the rupture.

13. 活塞裙面的设计受到热态变形、配缸间隙等诸多因素影响,目前尚无明确的理论依据和有效的手段。

Currently, there is no clear theoretical basis and effective means for piston skirt surface design which influenced by cylinder matching gap and thermal-deformation and so on factors.

14. 本发明公开了一种激光焊接活塞的方法,将分别制造的活塞头部和 活塞裙部,通过激光焊接连为一体;

The invention discloses a method for welding pistons by laser. The method comprises: a piston head and a piston skirt, which are respectively made, are welded into a whole by laser;

15. 采用异形销孔设计将是改变活塞内侧应力集中,提高裙部结构的安全系数,减少活塞裙部裂损的有效方法。

Using a special pin hole in design will be an effective method to change stress concentration on inside of piston, improve safety coefficient of skirt...

16. 并介绍了活塞的裙部微观形状。

Finally, it introduces the micro-shape of piston skirt.

17. 最后以135型柴油机活塞为例,进行了裙部型线的优化设计。

Finally, the optimum piston skirt profile of 135 diesel engine is made as an example.

18. 采用温度记忆螺钉法对桑塔纳汽车发动机活塞顶部与裙部温度进行了测定,分析了测试结果,并与有限元计算所得结果进行了比较。

The temperature of top and skirt of the piston of SANTANA engine is measured by using temperature memory screw, the results are analyzed, and agree with the calculated results of FEM.

19. 由于低发动机罩和短行程发动机的进一步普及,半围延裙活塞和滑裙式活塞开始使用。

As lower hood lines and over square engines became popular, the semi-slipper and full-slipper pistons came into use.

20. 在内燃机中组合式活塞结构应用广泛,例如钢顶铝裙活塞、内外组合活塞等。

Composite pistons of various types are widely used in internal combustion engines, such as steel crown and aluminium skirt type, inner and outer pistons type, and so on.

21. 本文以机车柴油机钢顶铝裙组合活塞为对象,建立组合活塞钢顶铝裙连接螺栓-活塞销的四体接触计算模型。

This paper introduced a four-body contact model of steel crown-the nodular cast-iron skirt-piston pin-connecting bolt for the steel-crown aluminum-skirt composite piston of locomotive diesel engines.

22. 本文以机车柴油机钢顶铝裙组合活塞为对象,建立组合活塞钢顶铝裙连接螺栓-活塞销的四体接触计算模型。

This paper introduced a four-body contact model of steel crown-the nodular cast-iron skirt-piston pin-connecting bolt for the steel-crown aluminum-skirt composite piston of locomotive diesel engines.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!