轴角用英语怎么说,轴角的英文翻译


词语导航

基本信息

词语:轴角

繁体:軸角

拼音:zhóu jiǎo

英语翻译

【化】 axial angle; optic(-axial) angle
【医】 axial angle

相关词条

1.shaftangle  

分词翻译

轴的英语翻译:

axes; axis; shaft; spindle
【医】 ax-; ax.; axes; axio-; axis; core

角的英语翻译:

corner; angle; cape; contend; horn; wrestle; role
【医】 angle; anguli; angulus; Broca"s angle; cornu; cornua; gonio-; horn

翻译例句

1. 转轴角-----球旋转时转轴的水平角度。

The rotational angle of a ball around its rotational axis.

2. 转轴角-----球旋转时转轴的水平角度。

The degree or angle of torsional stress.

3. 对于我们的努力并没有很大成效去移动地轴角度。

It is not responding well to our efforts to shift the axis degrees.wWW.wEnTiyI.com

4. 着重介绍这种轴角编码系统的编码原理和纠错方法。

Emphasis is put on the coding principle and the error correcting methods.

5. 介绍旋变及同步机轴角编码器的典型电路设计与调试。

The paper introduces the design and adjustment of resolver and synchronizer axial angle encoder.

6. 光电轴角编码器是一种应用广泛的光电角位置传感器。

The optical electric axial Angle encoder is a kind of widely used optical electric sensor for Angle detecting.

7. 介绍一种光电跟踪系统所采用的轴角编码与数字显示器。

The shaft angle encoding and digital display of an optoelectronic tracking system is introduced in the paper.

8. 研究了基于曲轴角度域闭环辨识柴油机模型的建模方法。

A new method of modeling of diesel engines is adopted based on the crank-angle domain.

9. 该轴角同步器驱动软件已应用于某装备综合自动测试系统。

The drive software of the shaft angle synchro converter has been applied in a weapon automatic testing system.

10. 本文介绍了同步机三相法轴角编码的原理及其实现的主要电路。

This paper introduces the principle of the shaft-position coding and the main circuit.

11. 这个在大光轴角厚晶体上进行定向的方法是方便、快速和有效的。

It is shown that this orientation method for crystals with large optical Angle is convenient, best and valid.

12. 光电轴角编码器中的莫尔条纹信号质量决定了整个系统的细分精度。

The signal quality of Moire fringe in photoelectric shaft encoder determines the subdivision accuracy of the whole system.

13. 数据包括体轴角速率和过载,由固连于飞行体的速率陀螺和加速计给出。

The measured data include angular rates and acceleration obtained from the rate gyros and accelerometers installed in the vehicle.

14. 介绍自行火炮定位定向导航系统中一种实现轴角-数字转换的设计方案。

This paper provides a scheme of design and realization angle-digital conversion in orienting and positioning navigation system for self-propelled Gun.

15. 轴角编码技术在闭环数字伺服系统中反映角位置量方面有着极为重要的应用。

The angle coding technique takes a great part in the use of closed digital servo control system for detecting the offset of angle.

16. 利用轴角-数字转换芯片a和旋转变压器,可以组成高精度的多通道测角系统。

Using the resolver - to - digital converter a a multi channel Angle measuring system.

17. 轴角编码组件能在恶劣环境条件下,保证电气精度的同时,具备较高的可靠性。

This kind of resolver shaft encoder can be used under severe enviroment with higher precision and reliability.

18. 文章介绍了双通道旋转变压器型轴角编码组件的研制,并且给出具体设计步骤。

The research and the detailed process of design for the two-speed resolver shaft encoder is introduced in this paper.

19. 本文介绍了光电轴角编码器光学、机械结构及原理;码盘设计及各码道功能;

The optical and mechanical structure and principles of photoelectrical angle encoder areintroduced, furthermore, the design of code disk and the function of every code track are pre-sented.

20. 本论文提出微型永磁同步电动机驱动系统的强健控制器设计及其转轴角度估测器。

This dissertation proposes a robust controller design and a position estimator for micro permanent magnet synchronous motor drive systems.

21. 利用光波面和光波法线面的曲线方程,得出了光波面上光轴角和光线轴角的表达式。

The expression of optic axial Angle and ray axial Angle on light wave plane can be obtained by using the curve equations of the wavefront of light wave and normal plane of light wave.

22. 光电增量式轴角编码器的输出信号由于其编码原理而在慢速或停止时易受轴抖动影响。

Owing to the encoding principle, the outputs of the Photo incremental Rotary Encoder suffer from disorder when its shaft vibrates, especially when rotating slowly or halting.

23. 所设计的控制器可以实现两个刚体的角速度运动达到关于惯性主轴角速度的部分同步。

The proposed controllers can achieve partial synchronization for the angular velocity with respect to the principal axes of inertia between angular velocity motions of the two rigid bodies discussed.

24. 光电轴角编码器,又称光电角位置传感器,是一种集光、机、电为一体的数字测角装置。

Photoelectric rotary encoder, which is also called photoelectric angel position sensor, is a kind of digital angle measuring device combining optics, mechanics and electronics.

25. 介绍了一种针对单圈绝对式光电轴角编码器而设计的基于PCI总线的实时数据采集系统。

A real-time data acquisition system based on PCI Bus was introduced. The system was designed for single-ring absolute optical shaft encoder.

26. 阐述了24位光电轴角编码器的结构、工作原理、硬件电路设计处理过程和软件编程特点。

In this paper the structure, operating principle, the design of hardware circuit and the feature software of the 24-bit photoelectric shaft encoder are expounded systematically.

27. 针对自整角机的轴角数字转换,提出了分区间正余弦信号相比较编码和双峰值采样的方法。

A practicable solution to the angle-digital conversion of synchro is provided, which includes cut section coding for the ratio of sine to cosine and sampling on double peak value.

28. 利用轴角-数字转换芯片AD2S82A和旋转变压器,可以组成高精度的多通道测角系统。

Using the resolver-to-digital converter AD2S82A, design a multi channel angle measuring system.

29. 利用轴角-数字转换芯片AD2S82A和旋转变压器,可以组成高精度的多通道测角系统。

Using the resolver-to-digital converter AD2S82A, designed a multi channel angle measuring system.

30. 利用轴角-数字转换芯片AD2S82A和旋转变压器,可以组成高精度的多通道测角系统。

Using the resolver-to-digital converter AD2S82A, designed a multi channel angle measuring system.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!