线膨胀用英语怎么说,线膨胀的英文翻译


词语导航

基本信息

词语:线膨胀

繁体:線膨脹

拼音:xiàn péng zhàng

英语翻译

【化】 linear dilatation; linear expansion; linear extension

相关词条

1.linearexpansion  

分词翻译

线的英语翻译:

clue; line; string; stringy; thread; tie; verge; wire
【医】 line; line Of occlusion; linea; lineae; lineae poplitea; mito-; nemato-
soleal line; strand; thread
【经】 line

膨胀的英语翻译:

expand; swell; bulge; dilate; inflate
【计】 dilatation
【化】 expansion; inflation; swelling
【医】 distention; ectasia; ectasis; ectasy; expansion; inflation; physiosis
swelling
【经】 expansion

翻译例句

1. 不同的基底合金具有不同的熔点及线膨胀系数。

Different base metal alloy has the different melting point and linear coefficient expansion.

2. 详细地探讨了应变片法测量材料线膨胀系数的原理。

The principle of the strain gauge technique for thermal expansion measurement was systematically investigated.

3. 可装低温液体进行低于环境温度的线膨胀系数测试试验。

Can be installed in cryogenic liquid is lower than the environment temperature linear expansion coefficient test test.

4. 该复合材料的热变形温度有所降低,但线膨胀系数减小。

Thermal deformation temperature and liner expansion coefficient of the composite were decreased.

5. 材料的线膨胀系数测试结果和导热系数结果也表明了同样的规律。

The HRB, CET and TC of the tests were founded the same laws.

6. 该文介绍了全息干涉计量法测量材料线膨胀系数的实验原理和实验装置。

This article introduced the experiment theorem and device of calculating the material linear expansive coefficient with the holographic interferometry.

7. 同时还研究了过渡层金属的种类、厚度及线膨胀系数对接合强度的影响。

The catalogue of transition-metals, thickness and the thermal expansion coefficient which influence the strength of the bonded places are studied as well.

8. 分析焙烧后型芯的化学成分、微观结构、孔隙率、线膨胀系数以及力学性能。

The composition, porosity, expansion coefficient, microstructure and mechanical property of the sintered ceramic cores were characterized.

9. 通过南昆线膨胀岩路堤离心模型试验,得出路堤在不同状态下的应力与变形特征。

Through the centrifuge modelling tests on expansive rock embankment in Nankun Railway, the characteristics of stress strain under different conditions are obtained.

10. 细长轴由于其刚性差、线膨胀大,难以获得较高的加工精度和较小的表面粗糙度。

Due to the bad rigidity and the big line inflation of the thin axis, it is hard to achieve the high processing precision and the small surface roughness.WWW.WEnTIYI.COm

11. 分析了瞬时线膨胀系数与平均线膨胀系数的差异以及不同钢种间热膨胀的差异性。

The difference of the value of the real thermal expansion coefficient and the average thermal expansion coefficient, and the difference of thermal expansion among the given steel grades were analyzed.

12. 通过所建二维细观损伤模型分析了真空热循环次数对材料线膨胀系数曲线影响的原因。

The effect of vacuum thermal cycles on the linear expansion coefficient profile was analyzed using a proposed two-dimensional model of micro-damage.

13. 将反射式光纤位移传感器应用于固体线膨胀系数测定仪,可以较精确地测定金属线胀系数。

The system consisting of optical fiber displacement sensor and solid linear expansion coefficient apparatus, is used to measure the linear expansion coefficient of metal.

14. 试验结果表明,用应变片法测量材料的线膨胀系数是一种简单可靠且经济实用的替代方法。

The experimental results prove that the strain gauge techniqueforthermal measurement is a reliable and economic alternate method.

15. 测试了基体和熔块的线膨胀系数、釉的熔融温度范围、釉面的白度、显微硬度和热稳定性等性能。

The coefficient of linear expansion of the body and glaze, the melting temperature range, the whiteness, the microhardness and the heat stability of glaze were tested.

16. 现浇砼屋面的砖混房屋中 ,由于砼与砖砌体的线膨胀系数相差一倍 ,顶层墙体容易产生温度裂缝 。

Temperature crack control of the top wall in masonry-concrete building with cast-in-place concrete roof;

17. 此外,基于原型观测资料,利用统计模型和确定性模型对碾压混凝土的等效温度线膨胀系数进行了反演分析。

In addition, statistical and deterministic mathematical models are used for back analysis of equivalent temperature linear expansion coefficient based on the prototype monitoring data.

18. 由于含水率梯度和温度梯度的存在,使得厚度膨胀远远高于线膨胀,因此厚度膨胀历来是尺寸稳定性的研究重点。

For the exist of moisture content gradient and thermal gradient, the thickness swelling is larger than the line swelling and so the thickness swelling is the emphasis of study.

19. 在研究方法上采用国际大型通用有限元软件ANSYS建模来实现混凝土骨料线膨胀对碾压混凝土温度应力的仿真计算。

Study method is to adopt ANSYS-international large-scale general-purpose finite element software to realize the simulation calculation of the RCC thermal stress for Aggregate linear expansion.

20. 采用钢尺精密检定的改进方法及钢尺实际线膨胀系数检测方法,加之自制的检定器具、设施,可较好地解决钢尺自身准确性问。

This problem could be well resolved by adopting improved steel tape precise test method and actual linear expansion coefficient, as well as self-made testing apparatus and tools.

21. 研究一种快速测报铝合金针孔度的方法。该方法是在铝合金凝聚固过程中,通过测量其因氢析出所产生的自由线膨胀而进行针孔度预测的。

The authors recommend a way for estimating the percentage of pinhole in solidified aluminum alloy by measuring its free linear expansion during the solidification.

22. 研究了激发剂对化工废石膏—粉煤灰新型道路建筑材料的强度和自由线膨胀率等性能的影响,以及减水剂的作用和新型道路建筑材料的抗硫酸盐侵蚀性能等。

The influence of activator on strength and free linear dilatability and sulfate resistance of chemical waste gypsum - fly ash new road building material as well as action of water reducer are studied.

23. 详细介绍热流道模具浇注系统结构设计和尺寸计算、热流道板加热功率计算、热流道板线膨胀量计算及在设计时应注意的一些问题,并介绍了一种二级脱模机构。

The structure design and the calculation of the sizes, heating power, linear swell value of hot runner system were discussed in detail. A two-step demoulding mechanism was also introduced.

24. 详细介绍热流道模具浇注系统结构设计和尺寸计算、热流道板加热功率计算、热流道板线膨胀量计算及在设计时应注意的一些问题,并介绍了一种二级脱模机构。

The structure design and the calculation of the sizes, heating power, linear swell value of hot runner system were discussed in detail. A two-step demoulding mechanism was also introduced.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!