连杆销用英语怎么说，连杆销的英文翻译

词语导航

基本信息

词语：连杆销

繁体：連桿銷

拼音：lián gān xiāo

英语翻译

【化】 link pin

分词翻译

连杆的英语翻译：

【化】 connecting rod; link rod; pitman

销的英语翻译：

annul; cancel; expend; forelock; melt; pin; sell; spend
【机】 cotter; pin

翻译例句

1. 导叶操作机构主要包括：导叶臂压板、导叶臂、分瓣键、连接板、耳柄、剪断销、连杆销及压盖等。

Guide vane operation structure includes the guide vane arm clip board, guide vane arm, segmental keys, connection board, handle, cut pin, connecting rod pin and gland, etc.

2. 通过把连杆连接到包住曲柄销的一个主盘上，十二个气缸便可在同一个曲柄销上工作。

By attaching the connecting rods to a master disk surrounding the crankpin, as many as twelve cylinders have been made to work on a single crankpin.

3. 在一些情况下，连杆小端夹定在活塞销上或在连杆里有一套管，这样可以使得活塞销与连杆能够共同摆动。

In some cases the small end of the rod is clamped to the pin or has a bushing in it to allow the pin and rod oscillation.

4. 在活塞中活塞销孔也同样为活塞销形支承面，其作用为连接连杆。

The piston pinhole in the piston also serves as a bearing for the piston pin, which is used to connect the connecting rod.

5. 当活塞在真空作用下运动时，由于活塞销和连杆的质量是依次连接的，活塞速度呈阶梯式变化。

When the piston is moved by vacuum, its velocity changes in steps, for the mass of piston pin and rod are connected in turn.

6. 连杆小头连接着活塞销。

The connecting rod little end is connected to the piston pin.

7. 连杆与活塞的连接是采用活塞销。

The connecting rod is attached to the piston by the piston pin.

8. 连杆的一端与曲轴的连杆轴颈相连，另一端通过活塞销与活塞相连。

The connecting rod is attached at one end to a crankpin on the crankshaft and at the other end to a piston, through a piston pin or wrist pin.

9. 整修气缸需要12～20小时（时间长短取决于发动机的类型），这包括调配和安装新活塞、活塞环、活塞销和连杆。

Refinishing cylinders requires 12 to 20 hours (according to the type of engine). This includes fitting and installing new pistons, rings, piston pins, and connection rods.

10. 没有离合器，传动装置，机油变化，尾气检查，活塞，活塞环，阀门，曲轴，飞轮，连杆，肘节销，等等。

There is no clutch, gearing, oil changes, smog check, pistons, rings, valves, crankshaft, flywheel, rods, wrist pins, etc. , etc.

11. 针对某增压柴油机振荡冷却油腔活塞的非对称结构，建立全活塞活塞销连杆小头的有限元模型；提出了振荡冷却油腔的第三类热边界条件的数学描述并进行了验证；

The FEM for the assembly parts of piston, gudgeon pin and small-end of connecting rod is constructed to investigate a diesel engine piston with an oscillating-oil-cooling channel.

12. 活塞销贯穿活塞，把连杆小头与活塞连在一起，并将连杆保持在活塞中心的适当位置处。

The piston pin fits through one side of the piston, through the small end of the rod, and then through the other side of the piston. It holds the rod firmly in place in the center of the piston.WwW.WentIyI.com

13. 一种新十字头连接结构，由活塞杆、球面垫圈、十字头、十字头销和连杆组成。

The utility model relates to a novel crosshead connecting structure which is composed of a cylinder rod, a spherical washer, a crosshead, a cross pin and a connecting rod;

14. 应用ADAMS软件的CAR模块建立了轿车多连杆式前悬架和转向系统的多体运动学模型，对主销和前轮定位角进行了仿真计算研究。

Kinematic model for a car"s front multi-link sus-pension and steering system was developed using ADAMS/CAR module. An investigation was done of the suspension"s kingpin axis and wheel orientation.

15. 应用ADAMS软件的CAR模块建立了轿车多连杆式前悬架和转向系统的多体运动学模型，对主销和前轮定位角进行了仿真计算研究。

Kinematic model for a car"s front multi-link sus-pension and steering system was developed using ADAMS/CAR module. An investigation was done of the suspension"s kingpin axis and wheel orientation.