工艺气体用英语怎么说，工艺气体的英文翻译

词语导航

基本信息

词语：工艺气体

繁体：工藝氣體

拼音：gōng yì qì tǐ

英语翻译

【化】 process gas

分词翻译

工艺的英语翻译：

craft; technics; technology
【计】 MOS technology
【化】 methodology
【经】 technology

气体的英语翻译：

gas
【化】 gas
【医】 gas; pneuma-; pneumato-

翻译例句

1. 压缩机以空气（氮气、工艺气体）加载运转。

The compressor is loaded up with the medium of air (nitrogen, process gas).

2. 实验发现，以氟基气体作为工艺气体，铝或铝合金作为掩蔽层时，可以获得极高的选择比；

Experimental results show that higher selectivity can be achieved when fluorine-based gas is used as processing gas and Al or Al alloys are introduced as mask layers.

3. 本文介绍了工艺线特种工艺气体系统改造设计方面的一些原则，并详细论述了管路的施工规程。

Some design principles for rebuilding the special gases system of a wafer fab are described. Engineering regulations for rebuilding the tubing system are discussed in detail.

4. 输气管线压气站工艺气体冷却器是压气站的重要设备之一，具有保护输气管线安全和提高输气效率的重要功能。

Process gas cooler at gas compressor station in gas pipeline, which has the function of ensuring gas pipeline safety and improving gas transmission efficiency, is one of important equipment.

5. 通过调整工艺气体流量大小，有效地降低了玻璃镀膜生产用电量和工艺气体用量，并且提高了镀膜玻璃产品质量。

By adjusting process gas flow, it effectively lowers power and process gas consumption for producing glass coating, furthermore upgrades quality of glass coating.

6. 当开挖暴露于来自邻近工艺运转或动设备的气体时，受限空间存在潜在的风险。

Confined Space Potentials exist when the excavation is exposed to hazardous gases from nearby process operations or mobile equipment.

7. 针对污泥厌氧消化的工艺设计，探讨了消化方式、池容、池形、搅拌、加热与气体收集系统设计等几个典型问题。

Some topics such as digestion approach, reactor volume and dimension, agitation, heating and gas collection system are discussed in this paper concerning Process Design for Sludge Anaerobic Digestion.

8. 针对奥迪轿车消音器的材料、结构及接头形式，研制了适用于消音器焊接的熔化极气体保护自动焊设备，并对焊接工艺进行了研究。

In order to solve Audi car muffler welding problems, a MIG automatic welding process and equipment arc developed which is suitable for the material, structure and joint type of the muffler.

9. 高灵敏度的氟里昂气体传感器是检测氟里昂泄漏的关键元件，本文叙述了氟里昂气敏器件的制作工艺、敏感原理、测试方法及测试结果。

Freon sensor with high sensitivity is key device for detecting freon leak. The manufacture technology, sensitivity mechanism, measure method and parameter of samples have beendiscribed in this paper.

10. 利用宏观分析、显微检验、硬度测试和装车试验等手段，对引进奥地利重型汽车内齿圈按照新的气体氮碳共渗工艺处理后的质量进行了研究。

The quality analysis for gas nitrocarburized inner gear ring of heavy truck imported from Austria was taken by means of macro/micro-examination, hardness measuring and running test.

11. 如果有分析仪器的话，一直净化设备，直到残留气体的氧含量或者低于或者满足工艺规范的纯度级别。

If analytical equipment is available, purge system until oxygen content of residual gas is either less than or meets the process specification impurity level.

12. 介绍和讨论利用粗颗粒钛粉末净化普通氮气及其在钛表面气体氮化工艺中的应用。

This article introduces and discusses the purification of ordinary nitrogen by coarse titanium powder and its application in gas nitridation technology of titanium surface.

13. 这条管线的输送介质为液氨（工艺空气、软水、碱液、酸性气体）。

The transfer medium in this pipeline is liquid ammonia (process air , soft water, alkali liquor, acidic gas).

14. 研究了试件表面处理状态、保护气体、激光输出功率、焊接速度、激光脉冲频率等工艺参数对焊接质量的影响规律。

The influence of the parameters such as surface treatment state, laser output power, welding speed, protective atmosphere, and pulse frequency on the welding quality was studied.

15. 采用电解技术制备可燃性气体催化敏感元件，讨论了电解工艺与元件性能的关系。

The preparation technology of catalytic gas sensors by electrolysis process for detecting flammable gases is introduced in this paper.

16. 根据除鳞介质的不同可将除鳞工艺分为高压水除鳞、压缩气体除鳞、喷沙除鳞。

Descaling technology sorted compressed gas descaling, high pressure water descaling, sand blast descaling by different descaling medium.

17. 为获得所需的质量，必须仔细选择和调整淬火气体和工厂的工艺。

In order to achieve the required quality, the quenching gases and plant technology must be selected and adjusted carefully.

18. 本文介绍了该装置的工艺流程、工艺特点以及气体脱水系统、制冷系统等。

The flow diagram, technical process, characteristics, gas dehydrate system and refrigeration system are introduced in this paper.

19. 依据化学动力学原理和内扩散理论，研制成功了无脆性快速气体渗氮新工艺。

According to chemical dynamics principle and internal diffusion theory, a no-brittle fast nitriding method has been developed.WWw.WEntiyi.cOm

20. 针对气体渗氮工艺存在的周期长和脆性大两个问题进行了初步的探讨。

The paper makes a primary approach to a two big problems on the long period and the heavy brittleness resulting from gas nitriding process.

21. 研究了钛及钛合金的气体标准试样制备工艺和数据处理方案。

The preparation procedure and data processing program of gas standard samples for titanium and titanium alloys.

22. 本文论述了气体渗碳工艺中应用微机控制碳势的原理和方法。借此控制系统提高了渗碳件的质量。

This paper deals with the application of microprocessor for gas carburizing to control carbon potential in order to improve the quality of products. Its principle and method are given.

23. 它们被广泛用作用于工艺和商业燃烧系统的气体安全切断阀门。

They are widely used as gas safety shut-off valves for industrial and commercial combustion systems.

24. 多产气体烯烃是DCC和MGG工艺的主要特点。

High gaseous olefin yields are the main features of DCC and MGG technologies.

25. 空气钻井是一种钻井工艺，是指利用气体去冷却钻头和把岩屑举升出油井环空，而不是利用更常使用的流体。

A drilling technique whereby gases (typically compressed air or nitrogen) are used to cool the drill bit and lift cuttings out of the wellbore, instead of the more conventional use of liquids.

26. 1973年后，世界性能源费用的增加，改变了酸性气体加工装置工艺设计和工艺选择的依据。

Worldwide energy cost increases since 1973 have profoundly affected process design and process selection considerations of sour gas treating plants.

27. 气体辅助注塑成型工艺包含塑料熔体注射和气体注射两部分，由气体推致力塑料熔体充满模具型腔。

Gas assisted plastics injection molding process includes injection of polymer melt into mold cavity and then injection of gas-compressed into the polymer melt.

28. 介绍气体加速泵的结构、工艺原理及现场试验情况。

This article introduces mainly the structure, technical principle and field experiments of the gas accelerator.

29. 介绍气体加速泵的结构、工艺原理及现场试验情况。

This article introduces mainly the structure, technical principle and field experiments of the gas accelerator.