带筒用英语怎么说，带筒的英文翻译

词语导航

基本信息

词语：带筒

繁体：帶筒

拼音：dài tǒng

英语翻译

【电】 tape cartridge

分词翻译

带的英语翻译：

belt; bring; strap; strip; take; wear
【计】 tape
【化】 band
【医】 balteum; band; belt; chord; chorda; chordae; chordo-; cingule; cingulum
cord; desmo-; girdle; ribbon; strap; strip; taenia; taenia-; taeniae
tape; teni-; tenia; zona; zone
【经】 belt

筒的英语翻译：

a section of thick bamboo; canister; tube-shaped object
【医】 balloon; tubo-

翻译例句

1. 研究了动载荷作用下带裂纹厚壁筒的应力强度因子。

We study stress intensity factor of thick wall cylinder with cracks under dynamic load.

2. 搅拌筒为带衬板结构，搅拌机架体使用寿命长。

Stir cylinder liner for the band structure, mixer body is long life.

3. 它垂直或水平安装，通常用油、蒸汽或筒式或带式电热器加热。

It vertical or horizontal installation, usually oil, steam or tube type or belt type electric heaters heating.

4. 扁平绕带式低温高压容器是一种新型低温液体贮存设备，由内外两层容器组成，内筒体的外壁焊有液氮预冷夹套。

Cryogenic high-pressure vessel wound by flat metal strip with a liquid nitrogen precooling jacket is a new fashion adiabatic equipment, which consists of inter vessel and outer vessel.

5. 该套车胎由带防滑钉的轮胎和大号座筒组成。

Sets are tyres with tubes and big sizes with naps.

6. 自动筒式过滤器带反转脉冲灰尘收集功能，可以清理操作室。wWW.WentIyI.cOM

Automatic cartridge filtration with reverse pulse dust collection is provided to allow for clean operations.

7. 在此基础上，进一步分析了带纵向内筋的筒形件旋压件时出现的几种质量缺陷，对椭圆形端口、表面鳞状剥离现象和隆起进行了解释说明。

Several quality defect are studied when thin-walled tubular parts with longitudinal inner rib is spinning, phenomenon of oval port, superficial peel-off and pilling are interpreted.

8. 该设备由筒体、支承装置、带档输支承装置、传动装置、活动窑头、窑尾密封装置、燃烧装置等部件组成。

This equipment is made up of kiln body, support device, supporting device with shelf, moving kiln head, sealing device for kiln tail, burning device and etc. Parts.

9. 带伸臂的框架—筒体结构体系是一种广泛应用于高层和超高层建筑中高效率的结构体系。

In practice of current multi-story buildings, the outrigger-braced frame- tube structure is a widely used effective structural system.

10. 带混凝土筒大开间砖混结构灵活住宅体系的特点是，每个单元有一个钢筋混凝土楼梯筒，分户横墙与外纵墙均采用组合砖墙砌体。

The unique feature of the large bay flexible residential building is that:every unit itself consists of a reinforced concrete tube-stairway core body-with its repective composite wall with openings.

11. 通过实例计算分析，给出了带托柱式转换梁的框架-核心筒结构的转换层上、下层间侧移角比的取值范围建议。

Base on the calculation of an example, suggestions on range of sideway ratio of stories up and down in transfer story of frame-core tube structure with column supporting transfer beam is obtained.

12. 整合块状矿体之下有一筒状矿化蚀变带。

The pipe mineralized alteration zone is conformaly under the massive ores.

13. 带纵向内筋的薄壁筒形件就是适应这一需要而出现的。

Thin-walled tubular parts with longitudinal inner rib can satisfy the demand.

14. 通过对带裂纹厚壁筒试件外壁动应变的测定，和用有限元方法计算冲击内压下动应变的变化规律，求出了实验中所加的冲击内压。

By measuring the dynamic strain of the cylinder and calculating the dynamic strain by finite element method, the impact internal pressure of experiment is determined.

15. 对顶部带伸臂的框架- 核心筒结构的整体稳定性进行了分析。

This paper analyses the buckling of top - outrigger - braced frame - tube structures.

16. 通过带混凝土筒组合墙、开洞组合墙等模型试验，得出组合墙的开裂、极限承载力的计算公式和混凝土筒—组合墙承载力及刚度计算方法。

Through model testing of the building, it has obtained cracks, rigidity, and ultimate bearing capacities, as well as the calculation methods and formulas of the structural system.

17. 提出了通过控制扁平绕带压力容器钢带预应力来控制容器筒体应力分布的寻优设计法。

An optimal design method that can control stress distribution of pressure vessel by controlling prestress of steel ribbon of Flat steel ribbon Wound pressure vessel (FSRWPV) is given out.

18. 本文研究了顶部带伸臂的框架—筒体结构体系的弹性有侧移稳定。

In this thesis, the elastic stability of the top-outrigger-braced Frame-Tube structures in a sway mode is investigated.

19. 通过对收发球筒进行带压试验，找出导致清管系统快开盲板带压运行的主要原因，并提出解决的措施。

Through test on pigging receiver and launcher enduring pressure, determined is main reason resulting in quick opening closure enduring pressure on pigging system, and resolving method is put forward.

20. 利用计算流体力学软件FLUENT-5，对带导流筒搅拌槽内的流场进行了数值模拟。

The commercial code of CFD (Computational Fluid Dynamics), FLUENT-5, has been used to numerically simulate the flow field in the draft-tube agitated tank.

21. 在理论分析和试验研究的基础上，给出了带加强层框架—芯筒结构的几点设计建议。

Based on theoretical analysis and test research, the design requirements of the structures are put forward.

22. 传送带系统以顺时针方向将管筒移动到清洁和填装站。

The conveyor system moves the tubes clockwise towards the cleaning and filling station.

23. 当用增加筒体壁厚或者接管壁厚的方法不能有效地降低带长矩形接管受压圆筒体的应力强度时，提出了采用加强筋的方法，此措施可达到显著降低矩形接管部位应力水平的目的。

Structural reinforcement measures were proposed in order to reduce the stress level of the joint which can not be effectively reduced by increasing the thickness of the cylinder or tube wall.

24. 扁平绕带高压容器是由内筒、交错缠绕在内筒外的钢带层、端盖和封头等组成的新型壳体结构。

A flat ribbon wound pressure vessel is made up of a thin inner shell, flat steel ribbon layers that are cross-helically wound outside the inner shell, a top cover and a bottom cover, etc.

25. 纳米碳酸钙新产品的干燥，目前大多采用烘房烘干、转筒干燥、喷雾烘干、闪蒸干燥、带式烘干等方法。

The drying of calcium carbonate made with nano-technology is currently by the methods such as baking at baking shop, drying at rotating column, spraying baking, flash drying and band-type baking.

26. 网球运动至今尚存的贵族礼节中，很重要的一点就是每个球员都应该带一筒新的球来参加比赛。

Of the aristocratic points of etiquette that live on in tennis, an important one is that each player should bring a new can of balls to a game.

27. 超导筒由带狭缝的超导厚膜筒及位于狭缝间并与超导厚膜筒相连的超导微桥组成。

The superconducting cylinder consists of superconducting thick-film cylinder with narrow crevice and superconducting micro-bridge connected to the former.

28. 在研究自动铺带成型技术的基础上，提出了一种用于复合材料筒段构件自动铺带成型轨迹规划的设计方案。

Based on research for automatic tape-laying (ATL), a design concept of path generation with the ATL process is advanced for composite material cylinder components.

29. 在研究自动铺带成型技术的基础上，提出了一种用于复合材料筒段构件自动铺带成型轨迹规划的设计方案。

Based on research for automatic tape-laying (ATL), a design concept of path generation with the ATL process is advanced for composite material cylinder components.