
词语导航
基本信息
词语:直齿
繁体:直齒
拼音:zhí chǐ
英语翻译
【机】 straight teeth
分词翻译
直的英语翻译:
frank; just; straight; vertical
【医】 recto-
齿的英语翻译:
tooth; tine
【医】 dens; dent-; dentes; denti-; dento-; odont-; odonto-
翻译例句
1. 锥齿轮的齿可以是直齿、螺旋形或准双曲面。
The teeth on bevel gears can be straight, spiral or hypoid.
2. 本文以标准渐开线直齿圆柱齿轮作为研究对象。
The standard involute cylinder gear is studied in this paper.
3. 由于鼓形齿式联轴器角向补偿大于直齿式联轴器。
Drum gear coupling due to the compensation Angle is greater than straight-tooth coupling.wWW.WEntIYi.COm
4. 介绍了渐开线直齿内齿轮插齿刀的优化设计方法。
The optimum design method of involute internal gear slotting cutter is introduced.
5. 互相啮合的直齿圆柱齿轮,必须具有相同的径节。
Meshing spur gears must have the same diametral pitch.
6. 直齿共轭内啮合齿轮泵是一种新型低噪声液压元件。
Straight conjugate internal gear pump is a new kind of hydraulic component with low noise.
7. 推导基于工程应用的直齿圆锥齿轮啮合面的数学模型。
The inferential reasoning based on the mathematical model of straight bevel gear mating surface in project application.
8. 本文建立了时变啮合刚度的直齿行星齿轮动力学模型。
This paper presented a lumped-parameter model for planetary gears, including mesh stiffness variation.
9. 齿轮滚刀常用的加工外啮合直齿和斜齿圆柱齿轮的刀具。
The processing of gear hob used the meshing straight teeth and helical cylindrical gears of cutting tools.
10. 高频感应淬火不能达到硬化冷精锻直齿圆柱齿轮齿面的目的。
The high frequency induction hardening can"t raise the surface microhardness of the cold precision forging spur gear.
11. 对直齿面齿轮传动在考虑边缘接触下的承载接触进行了分析。
The loaded tooth contact ana-lysis(LTCA) under the condition of tooth edge contact is investigated in this paper.
12. 安装在两根平行轴上的直齿轮最常见的齿轮,这种齿轮带直齿。
A pair of spur gears for mounting on parallel shafts are the most common type of gears, which have straight teeth.
13. 静态计算结果表明,直齿锥齿轮齿廓长修形具有较好的减振效果。
The result of static calculation showed that the tooth profile long modification of spur bevel gear possesses better effects of vibration reduction.
14. 建立了单级2k - H直齿行星传动的纯扭转集中参数动力学模型。
A simplified purely torsional concentrated parameter model of a single stage 2k-h spur planetary gear transmission (PGT) is developed.
15. 对钢球法测量直齿圆锥齿轮齿厚及锥项位置误差检测进行了研究和探讨。
Deviation measurement of tooth thickness and conical point of straight bevel gear by using steel bail was studied and approached.
16. 介绍了精密塑料小模数直齿圆柱齿轮模具型腔尺寸计算方法及成型工艺。
The cavity dimension calculation of injection mold of plastic small-module precision cylindrical spur gear and its molding technology are introduced.
17. 建立了精确计算直齿锥齿轮轮体积以及沿齿长方向各截面面积的数学模型;
The mathematical pattern for accurately calculating volume of tooth and areas of each section which is dispersed along the length of tooth is established.
18. 建立了直齿圆柱齿轮、齿圆柱齿轮、齿圆锥齿轮、齿圆锥齿轮的统一模型。
A unified model was established for spur cylindrical gears, helical cylindrical gears, spur bevel gears and helical bevel gears.
19. 利用挤压铸造技术生产高铝锌基合金直齿圆锥齿轮,齿面精度能够得到保证。
The high al, Zn base alloy conical gear with straight tooth in squeezing casting can ensure an accuracy of tooth face.
20. 对直齿圆柱齿轮传动进行模糊可靠性优化设计,设计出的方案更经济、合理、适用。
The plan carrying on the fuzzy reliability optimization design to the spur gear drive will be more economical, reasonable and suitable.
21. 直齿锥齿轮一般要在专用机床上加工,但能够加工大型直齿锥齿轮的生产企业极少。
The straight subulate gears are commonly been machining on special machine tool, but the factories of machining the large-size straight subulate gears are rather less.
22. 本课题开发了直齿圆柱齿轮传动、斜齿圆柱齿轮传动和直齿圆锥齿轮传动CAD系统。
The transmission CAD system also includes diagonal tooth cylinder gear and straight tooth taper gear transmission CAD system.
23. 其次,用有限元法,计算了直齿圆柱齿轮传动的啮合刚度,得出了啮合刚度的变化曲线。
Secondly, on the base of FEM, mesh stiffness of straight tooth cylindrical gear is calculated, and curve of stiffness is find.
24. 轿车上的直齿圆锥齿轮尺寸精度与产品质量要求很高,难以采用常规的塑性加工技术成形。
Straight bevel gears used in car differential have strict requirements for dimensional precision and quality, it is difficult to form accurately them by the traditional forging techniques.
25. 详细介绍了实际工作中较实用的直齿渐开线齿轮、斜齿渐开线齿轮参数的测量与确定方法。
This paper introduces in detail some measuring and determining methods of the parameters of the straight and inclined involute gears that are more practical in the actual work.
26. 介绍了两级直齿圆锥—斜齿圆柱齿轮减速器等强度优化设计的数学模型及优化方法的选取。
In this paper, a mathematical model and the selection of optimization method for equal strength optimized design of two-stage straight bevel gear-helical cylindrical gear reducer are introduced.
27. NET平台开发技术、数据库技术、有限元技术,以直齿及锥齿为例详细介绍了运用VB。
NET platform, database technology and FEA technology, the developing process, implementing methods and key technology of multi-platform CAD technology in which VB.
28. NET平台开发技术、数据库技术、有限元技术,以直齿及锥齿为例详细介绍了运用VB。
NET platform, database technology and FEA technology, the developing process, implementing methods and key technology of multi-platform CAD technology in which VB.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
