
词语导航
基本信息
词语:再命令
繁体:再命令
拼音:zài mìng líng
英语翻译
【法】 reorder
分词翻译
再的英语翻译:
again; anew; more; once more; re-; return
【医】 ana-; re-
命令的英语翻译:
order; command; appoint; dictate; imperative; instruct
【计】 command; GO TO command GOTO
翻译例句
1. 拉特里奇博士和古德温上尉一再命令他集中精力寻找爆炸案制造者,然而,他获得的信息越来越多,不仅仅是关于这次恐怖袭击的,还有关于他在现实中的个人状况。
Each time he learns more, both about the terrorist attack and his real life personal situation, even though Rutledge and Goodwin constantly direct him to focus on finding the bomber.
2. 德弗罗命令他的士兵等船驶近了再开火。
Devereux ordered his men to hold their fire until the ships got closer.
3. 随后,它将等待另一个程序(在本例中为DB 2LOAD命令)连接到它,然后再开始向管道写入数据。
It then waits for another program (in this case the DB2 LOAD command) to connect to it before it starts to write data to the pipe.
4. 它们比用电动扩音器喊命令再容易引起注意。
They"re more easily noticed than a command shouted through a bullhorn.WwW.WENTiYi.com
5. 斯内普嘶嘶地说道。现在他不会让博恩斯再给他下命令了。
There was no way for Burns to give him orders now.
6. 在命令行中,我们可以更好地控制classpath,这样可以分解每个步骤,最终再组合起来,就可以使整个工作顺利而简单。
From the command line, we have much more control over the classpath so breaking the steps up makes everything smooth and easy.
7. 刚开始是很难理解这些词的,但其实都是一个意思,所以,只要在命令行上为这个程序,再添加一个名曰GCC的输入就OK啦。
It"s just hard to keep track of them at first but they all generally mean the same thing, provide additional input to this program called GCC by just specifying it on the command line.
8. 如果我的系统中,-lsun应该提供getpwnam,我应该可以使用命令行来对其进行确切检查,然后再使用测试程序。
If I were on a system where -lsun ought to provide getpwnam , I"d have been able to look at the exact command line used to check for it, and the test program used.
9. powerwait:只在init收到电源故障信号时执行命令,并且等待进程终止后再继续扫描inittab文件。
Powerwait: Only execute the command if init receives a power fail signal, and wait until the process terminates before continuing to scan the inittab file.
10. 首先,要使用db2set命令将DB2_HASH_JOIN设置为NO,然后停止后再启动db2,如清单1所示。
First, use the db2set command to set DB2_HASH_JOIN to NO, and stop and start db2, as shown in Listing 1.
11. 如果我们再假设大部分用户都使用最多8个字符作为自己的用户名,那么我们就可以使用下面的命令。
If you further assume that most users will use eight characters or fewer for their name, you can use the following command.
12. gnuplot假设要绘制的其他列也参照x轴,所以在plot命令中不需要再指定xtic。
Gnuplot assumes the rest of the columns to be plotted will reference that as well, so there is no need to specify the xtic again within the plot command.
13. 再通过如下insert命令用表2给出的数据填充DEPARTMENT填充。
And follow up with populating the DEPARTMENT table with the data delineated in table 2 with an INSERT command such as.
14. 请注意以上命令中NOT 操作符的次序,我们先拒绝,然后再允许。
Note in the above command the order of the NOT operator, we first deny then allow.
15. 但是,应该从最简单的命令和想法开始,然后再使用更强大的工具。
But start with the simplest of commands and ideas before breaking out the big guns.
16. 当SSD收到这个新命令后,它就可以将所定义的那些块添加到其释放列表,不会再担心这些块再成为损耗的一部分。
When the SSD receives this new command, it can add the blocks defined to its free list and no longer worry about moving them around as part of wear-leveling.
17. 不过,最好是在创建索引之后再执行LOAD命令,并在LOAD期间收集统计信息。
However, it is preferable to create indexes before performing the LOAD command, and collecting statistics during the LOAD.
18. 命令api很简单:您使用方法来创建它们,再设定任意的输入参数,接着执行它们,然后获取结果,最后销毁它们。
The command API is simple: you use methods to create them, set any input parameters, execute them, get the results, and destroy them.
19. 这尤其适用于当您输错时,或仅仅想稍微修改一下命令——这要比回想此命令再直接编辑它快得多。
This is particularly useful if you made a mistake, or want to just change the command slightly - it can be quicker than recalling the command and then editing it directly.
20. 然而,可以改变诸如根路径的配置参数和服务器编号,然后再使用oninit - i命令。
However, you can change the configuration parameters like root path and server number, and then use the oninit -i command again.
21. 尽管对于那些对网络管理员非常有价值的命令,sleep是一个很好的模型;但是没有理由先睡眠数秒钟,然后再返回。
There"s little point in sleeping for a few seconds and then returning; sleep is a good model, though, for the commands that are useful to network administrators.
22. 至于目前,我们先来看看输出,然后再使用新的键来运行一些set命令,并再次运行stats命令,注意发生了哪些变化。
For now, take a quick look at the output and then run a few set commands with new keys and then run the stats command again, noticing the changes.
23. 在安装完成之后你只需要再输入一行命令那么就全部搞定了。
After completing the installation process you simply need to type one more command and you are all set.
24. 尽管如今不愿意使用命令行的用户可以不必再使用它,但这仍然意味着他们将遗漏一些很优秀的实用工具。
And while it"s true that you no longer have to use the command-line if you don"t want to, it still means that you"re missing out on some great utilities.
25. 在加载这个模块之后,用户就可以使用echo命令向其中导入文本财富,然后再使用cat命令逐一读出。
After the module is loaded, the user can load text fortunes into it using the echo command and then read them back out individually using the cat command.
26. 如果预览信息显示一切正常,那么您可以不使用预览标记(- p)而再执行一次这个命令,如清单12所示。
If everything seems to be OK with the preview, execute it again without the preview flag (-p) as shown in Listing 12.
27. 然后沙佐再1610年5月又命令两位公证员去收集证据。
Thurzo then ordered two notaries to gather evidence in March 1610.
28. 然后沙佐再1610年5月又命令两位公证员去收集证据。
Thurzo then ordered two notaries to gather evidence in March 1610.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
