
词语导航
基本信息
词语:壳模型
繁体:殼模型
拼音:ké mó xíng
英语翻译
【化】 shell model
分词翻译
壳的英语翻译:
carapace; hull; rind; shell; shuck
【化】 cover
【医】 crust; crusta; crustae; putamen; shell; testa
模型的英语翻译:
former; matrix; model; mould; pattern
【计】 Cook-Torrance model; GT model GT; MOD; model; mosel
【医】 cast; model; mold; mould; pattern; phantom
【经】 matrices; matrix; model; pattern
翻译例句
1. 这就是核壳模型。
This is the shell model.
2. 本文试验研究了三个加肋圆柱壳模型的振动相似性。
This paper investigates experimentally the vibrational similarity among three models of stiffened cylindrical shells.
3. 具有不同初始缺陷幅值的纵横加筋圆柱壳模型被计算。
The calculations are carried out for ring and stringer-stiffened cylinders with variable initial imperfection amplitudes.
4. 用推转壳模型计算研究了原子核的高速转动运动及其结构特性。
We used the cranking shell model to investigate the high-spin motions and structures of atomic nuclei.
5. 介绍了利用曲壳模型计算地应力的方法,给出了计算实例和计算结果。
The way of calculation tectonic stress has been introduced by using shell model, calculating example and results can be given.
6. 提出平均场壳模型下原子核单体密度矩阵的一种计算方法,验证该方法的可靠性。
A method calculating one body density matrix of nucleus in the mean field shell model is proposed.
7. 同时得出了推转壳模型角动量的能级结构和角动量的概率结构(I结构)及其随推转频率的变化。
In the meantime, the calculation give us the co variation of the I structure and it"s energy structure in the cranked shell model.
8. 简要地讨论了推转壳模型,对力的BCS方法,转动谱自旋指定和转动惯量分析和全同带研究进展。
As special topic, we discussed cranking shell model, BCS method of pairing force, spin assignment of rotational spectra and inertia analysis and new development of identical bands.
9. 用复平均场和复剩余相互作用的壳模型理论,定性地讨论了反核子与原子核相互作用体系出现窄宽度结构的可能性。
The possible existence of the narrow width structures in the Antinucleon-Nucleussystem is discussed qualitatively by using complex shell model theory.
10. 采用正交各向异性叠层复合材料加筋圆锥壳模型,对大型汽轮发电机定子端部绕组整体结构的固有振动问题进行了研究。
The inherent frequency and modal testing about end winding of generator stator are introduced, the vibration of end winding on-line monitoring is analyzed, a personal point of view is introduced.
11. 该方法弥补了以往各向同性球壳模型的不足,可计算出任意深度的原岩应力状态:铅垂应力、平均水平应力、水平面内最大及最小正应力。
By this method, it is capable for calculating the initial rock stress, i. e., vertical stress, average horizontal stress, maximum and minimum horizontal stress, in any depth below surface.
12. 对于影响围壳模型辐射声功率的主要因素,比如围壳模型厚度、不同的加肋情况和激励力分布等,进行研究分析其对围壳辐射声功率的影响。
The effect of main factors, such as the thickness of the model, the distribution of symmetric forces excited on the model, and different kind of ribs, on the radiated sound power has been analyzed.
13. 一组精密的计算机模型模拟出了土星的潮汐引力可能将不幸位于某一特殊位置的大型卫星的外层冰壳剥离开来。
A sophisticated computer model demonstrates how tidal forces on Saturn could have peeled away the icy outer layers of a large moon that occupied an unfortunate piece of real estate.
14. 整个模型共有102,109个节点,109,834个单元,包括壳单元,体单元、梁单元、弹簧单元等单元类型。
It was modeled with 102,109 nodes and 109,834 elements, including beam, shell, solid and spring elements.
15. 采用有限单元法对升船机卷筒结构进行整体计算,提出了有限元分析的力学模型,对筒壳、幅板的强度及刚度作了全面分析。
The paper USES finite element method to calculate the whole reel structure of a ship lift and presents the mechanical model of finite element analysis for the structure as a whole.
16. 模型由压缩机、壳管式冷凝器、膨胀阀以及满液式蒸发器等一系列部件模型组成。
The model consists of component models including the compressor, shell and tube condenser, expansion valve and flooded evaporator.
17. 这种模型主要采用壳单元来模拟焊缝,这样不但很好地保证母体板材与贴板的连接,而且大大减少了前处理的工作量。
In the model, shell elements are adopted to simulate welds, which not only well ensure the connection between parent plates and flitch plates, but also was the work amount of pretreatment reduced.
18. 然后采用实验模态分析和有限元建模相结合的建模方法,获得了足够精度的传感器壳修正模型。
And then obtained the modification model of sensor shell with sufficient accuracy by adopting the combined modeling method of experimental modality analysis and finite element modeling.
19. 有限元分析表明,开孔圆柱壳与其相应的平板模型在开孔附近的等效应力分布非常相似。
The similarity between equivalent stress distribution around the holes in cylindrical shell and its plate model is shown through finite element analysis.
20. 从杂质气化的角度,应用弹性力学的球壳受压膨胀模型,分析薄膜表面鼓包的形成机制,同时得到了相应情况下薄膜的损伤机制。
From the point of gasification of impurity, we have analyzed the formation mechanism of bubbles in the surface of films using model of a spherical shell which endures high inner pressure.
21. 应用形式渐近分析和拉普拉斯变换,我们从三维线性粘弹性方程组得到二维线性粘弹性弯壳的数学模型。
By applying formal asymptotic analysis and Laplace transformation, we obtain two-dimensional model system of linearly viscoelastic "flexural" shell from three-dimensional equations.
22. 该模型通过预测坯壳应力和鼓肚变形量为现场安全生产提供了理论依据。
The model can provide the theory for the field safety production by the prediction of shell stress and dilatancy distortion value.wWw.WEntiyI.COm
23. 本文通过对波函数、原子能量、辐射跃迁等方面的讨论,分析了原子结构壳层模型的近似性。
The approximation of the shell model in atomic structure had been assayed with discussion about the wave funtion, atomic energy and the radiant transition in this paper.
24. 目的通过建立H 22肝癌荷瘤鼠作为实验动物模型,研究壳寡糖对荷瘤鼠免疫功能的影响。
Objective to experiment the tumor animal model to the H22 Cancer of the liver mice, and study the influence of chitosan oligosaccharide on immunity function of tumor mice.
25. 该文建立了自动武器抽壳计算模型,计算出抽壳时药筒与弹膛的接触压力和抽壳阻力。
This paper not only establishes a computing model of the extraction in automatic weapons, but also sets up an extraction measurement system.
26. 该模型将箱壳视为单层钢板,忽略了一些加强角铁等加强件。
Tank shells are considered the single layer and the reinforce iron plates are ignored in creating the model.
27. 对柱面扁壳建立了与试验模型相一致的有限元数值分析模型。
Numerical model of the cylindrical shallow shell which is consistent with experiment is constructed.
28. 对先进核电厂预应力混凝土安全壳1:10模型结构进行了内压作用下的非线性有限元分析。
Nonlinear finite element analysis of 1:10 advanced nuclear power plant prestressed concrete containment model structure subjected to internal pressure is carried out.
29. 模型由壳单元和线性弹簧—阻尼单元构成。整个模型包括13861个节点和18966个单元。
The model was constructed using shell and linear spring-damper elements, including 13861 nodes and 18966 elements.
30. 模型由壳单元和线性弹簧—阻尼单元构成。整个模型包括13861个节点和18966个单元。
The model was constructed using shell and linear spring-damper elements, including 13861 nodes and 18966 elements.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
