长度操作用英语怎么说,长度操作的英文翻译


词语导航

基本信息

词语:长度操作

繁体:長度操作

拼音:cháng dù cāo zuò

英语翻译

【计】 size operation

分词翻译

长度的英语翻译:

in length; length
【化】 length
【医】 L.; length

操作的英语翻译:

handle; manipulate; operate
【计】 FUNC; O; OP
【化】 manipulation
【医】 procedure; technic; technique
【经】 operation

翻译例句

1. 待执行的字符串操作可能导致不同的输出,取决于计算字符所使用的字符串长度单元。

The string operation to be performed may result in different outputs, depending on the string length unit that is used for counting the characters.

2. 生成代码只是为了使常见长度的操作执行得更快,因此平均下来,性能得到了改进。

The code is simply generated to be faster for the commonly observed length so that, on average, performance is improved.

3. 连接操作可能要消耗大量的资源和时间,这取决于表的数量以及这些表各自的长度。

Depending upon the number of tables and their respective sizes, a join operation can be very resource intensive and time consuming.

4. 刚开始开发的人,通常会犯这样一个错误- - - - - - -会低估从无到有开发一个操作系统需要的时间长度。

A common beginner mistake, however, is to underestimate the time needed to write an operating system from scratch.

5. 为此,把这个操作指定为数组键并指定在缓存中保留视图的时间长度,像上面一样。

To do so, you would specify the action as an array key and the length of time to keep the views in cache, much like you did above.wWw.WEntiyI.CoM

6. 关于此方法的一个很好的例子是收集一个特定arraycopy操作的长度。

A good example of this approach is collecting the length of a particular arraycopy operation.

7. 如果输入长度和parseposition索引值不匹配或解析过的Number是null,则执行的是错误操作。

Perform error operations if the input length and ParsePosition index value don"t match or if the parsed Number is null.

8. 例如,可以确定两个图形之间的距离,执行空间集合操作,如合并或交叉图形,获取一个linestring 的长度。

For example, you can determine distances between two geometries, perform spatial set operations like unioning or intersecting geometries, and retrieving the length of a linestring.

9. 由于所有操作名称的长度均为六个字符,因此该问题并不特定于此示例,但需要构想一个可以指定更复杂动词(例如“Get”、“List”或“Find”)的标准。

This is not problematic specifically in this example, since all of the operation names are six characters long, but imagine a standard that specifies more complex verbs like "Get", "List", or "Find".

10. 因此,如果长度值在0到127之间,那么我可以只执行该长度与0xff之间的一个按位AND操作。

Therefore, if the length value is between 0 and 127, I can simply perform a bitwise and operation between the length and 0xff.

11. 幸运的是,rope的重新均衡操作非常迅速,至于应该何时进行重新均衡的决策也能够自动制定,例如通过比较rope的长度和深度来决定。

Luckily, rope rebalancing is fast, and the determination of when to rebalance can be made automatically, for example by comparing the rope"s length and depth.

12. RC 4是一个流密码算法,它对数据的每个字节进行操作;和RC 2一样,它支持长度为40位、64位和128位的密钥。

RC4 is a stream cipher algorithm operating on each byte of data; like the RC2, it supports key lengths of 40 bits, 64 bits, and 128 bits.

13. 如果没有两个位置操作符,则会错误地接受任意长度的用户名。

Without the two positional operators, user names of arbitrary length would erroneously be accepted.

14. 如果收集了所有必需的按键和释放操作的密码长度都相同并且包含相同的字符,则找到一个匹配并且子例程成功退出。

If the passwords collected all of the required key press and key releases, are the same length, and contain all the same characters, a match was found and the subroutine exits successfully.

15. 此配置在垃圾回收器运行的频率和垃圾回收器进行垃圾回收操作的时间长度之间进行了平衡。

This configuration provides a balance between how often the garbage collector runs and how long it takes the garbage collector to collect garbage.

16. 操作设备按照长度和厚度进行排序和堆积木材,移动堆栈到存储区或干燥窑,并将木材填入刨床。

Operate equipment to sort and stack lumber by length and thickness, move stacks to storage areas or drying kilns, and feed lumber through planers.

17. 在虚拟存储系统中,一个固定长度的连续虚拟地址块,在分页操作过程中它作为一个单位在内存和磁盘之间来回复制。

In a virtual storage system, a fixed-length block of contiguous virtual addresses copied as a unit from memory to disk and back during paging operations.

18. 它的意思是如果我想要,得到一个线段的长度,首先要把这个实例传进来,然后对于这个实例,从开始点,取得x坐标,然后通过同样的操作。

It says if I want to get the length of a segment, going to pass in that instance, it says from that instance, get the start point, that"s the thing I just found.

19. 许多激光测量设备有显示最小和最大尺寸的设定;操作者必须只能沿着边缘点扫描。在测量对角线长度的时候这一点非常有用;

Many laser measuring devices have setting which shows minimum and maximum dimensions; the operator must merely scan the dot along an edge. This is helpful for taking diagonal measurements.

20. 如何设置刀具长度补偿参数一直是数控铣床和加工中心编程和操作中的难点。

How to set the tool length compensation parameters is the difficulty in operating NC milling machine or machining center.

21. 配备所需长度的阀杆延长件,可以对某个蝶阀进行远程操作。

Stem extensions can BE furnished to permit remote operation of butterfly valves in any required length.

22. 在"A "后缀型号配备有预设的长度自动浮动开关的自动操作。

A "suffix models are equiped with preset length automatic float switch for automatic operation.

23. 指对某一操作系统而言是未确定的或不知道的。例如,某条“未定义记录”就是一种未确定或不知道长度的记录。

Not specified or not known to an operating system. for example, an "undefined record" is a record of unspecified or unknown length.

24. 而柜内空间高大,内部最高为1.7米,长度1.5米的层析柱也可轻松操作。

The space inside is very large, highest of 1.7m, lengthest of 1.5 meter, can easy to operate.

25. 介绍了钢锭粗轧过程中对切头、切尾及均分段操作的长度计算方法及控制策略。

This paper introduces the length compute means and control method for cutting head, cutting end and mean cutting operation in bar roughing roll process.

26. 该系统可以根据需要播放不同长度和格式的音频文件,文件存取方便,操作简单。

The system may play different length and format of audio files as need, convenient to access, easy to operate.

27. 在顺风航标时我多计算了两个船身的长度,迎风时也一样,这使我们每次操作都损失了30秒。

I went two lengths over the lay line downwind, and the same upwind, which made us, lose 30 seconds each time.

28. 研究了中空纤维膜组件在反冲操作时膜管内压降规律,考察了膜渗透系数、膜长度及膜内径对膜内压力分布及透量因子的影响。

The pressure distribution in hollow fiber membrane model is given and the effects of membrane permeability, length and diameter on pressure distribution and flux factor of the model are studied.

29. RISC通过保证每一个指令的长度相等的方法避免了这个问题,使指令在并行结构中更容易被流水线操作。

RISC avoided this problem by keeping every instruction at the same length, making it easier for instructions to be pipelined in parallel.

30. 建立了XDA - 1树脂柱吸附茶多酚过程的传质模型,并根据该模型分别计算了不同操作条件下相应的物质总传质系数及传质区长度。

Adsorption model for TP mass transfer with XDA-1 resins was set up and the height of mass transfer zone and total mass transfer coefficient in different operation conditions were calculated.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!