数控网络用英语怎么说,数控网络的英文翻译


词语导航

基本信息

词语:数控网络

繁体:數控網絡

拼音:shù kòng wǎng luò

英语翻译

【计】 numerical control network

分词翻译

数控的英语翻译:

numerical control
【计】 NC; numeral control

网络的英语翻译:

meshwork; network
【计】 ILLIAC network ILLIAC; internetwork; NET; network
【化】 mesh; network
【经】 network

翻译例句

1. 本论文将根据数控网络的这些特点,详细介绍如何在物理层,用VHDL语言设计一个满足这些要求的模块,通过光纤实现点对点的通信。

This paper will describe how to realize the fiber communication be - tween points in the CNC net base on the CNC net character. This module is designed with VHDL language and realized with...

2. 在分析开放式数控系统和网络数控技术的基础上,首次提出了数控信息网络存储制造的新概念。WWw.wentIYI.com

On the basis of analyzing open CNC system and network CNC technology, the new concept of nc information network storage manufacture was presented.

3. 根据轮毂上曲面的特殊性,提出了采用神经网络方法进行编程,实现数控加工,以取代传统的加工方法的设想。

According to the peculiarity of surface on wheel hub, the method of programming by neural network is presented to realize NC machining instead of traditional machining method.

4. 通过高精度的数控移动工件台获取密集的样本数据,并在神经网络训练过程中采用贝叶斯正则化方法。

Dense sample data are acquired by using numerical control platform of high precision, and the Bayesian generalization is adopted during training the neural network.

5. 论文对开放式网络数控系统的各种信息进行了研究,并建立了各种信息模块,详细论述了数控系统信息集成的一些关键技术。

The paper researches information of open network CNC system, sets up module of information and elaborates the key technology of information integration of CNC system.

6. 提出了一种改进的BP神经网络模型应用于数控机床的故障诊断方法。

This paper presents a fault diagnosis method that an improved BP neutral network model is applied to CNC machine.

7. 数控车床;智能故障诊断;贝叶斯网络;振动分析。

CNC lathe; intelligent fault-diagnosis; Bayesian Network; vibration analysis.

8. 本文提出了一种新型的神经网络结构的位置控制器,给出了该控制器的学习算法,并进行了数控机床位置伺服系统的仿真实验。

This paper proposes a new type position controller with neural network structure, gives it "s learning rule, and do the simulation experiment on position servo system of NC machine.

9. 数控系统作为数控装备的核心和网络化制造系统中的最基础和最底层设备,已经成为网络化制造中的重要一环。

Being the kernel and the most basic and bottom equipment, Numerical Control System has become important tache of Network Manufacturing.

10. 介绍分布式计算机数控系统通信网络的结构、通信协议、通信与管理软件的特点及功能。

Introduces its construction of distributed numerical control system, and communication protocols, and features and function of the software of DNC communication and managing.

11. 针对多数制造车间中不同档次和型号数控设备通信能力存在较大差异的现状,构建一个基于RS—485标准接口的集成dnc系统通信网络。

An integrated DNC communication network is set up based on RS-485, for in many manufacturing workshop, communication capacity of different kinds of NC equipment differs a lot.

12. 文章介绍了分布式计算机数控系统通信网络的结构、通信协议、调试步骤以及通信与管理软件的主要功能。

This article mainly introduces the construction of distributed numerical control system, communication protocols, debug process, and function of DNC communication and managing software.

13. 提出了将一种改进的人工神经网络联想记忆模型应用于计算机数控机床的故障诊断方法。

A modified associative memory model of Artificial Neural Network (ANN) is introduced into the fault diagnosis of computer numerical control machine tool.

14. 论文详细阐述了开放式网络化数控系统的概念、内容及其体系结构,并对数控系统的实时性进行了分析,建立了一种NC嵌入PC型数控系统的软硬件结构。

The paper introduces concept, content and architecture of open network CNC, analyze Real-time of CNC and establish a platform of open network CNC of NC-embedded PC structure.

15. 该数控系统在保证良好的实时性、稳定性,满足高精加工要求的同时,具有良好的开放性、人机界面与网络支持。

The nc System provides good performance of real-time and robustness and meets high precision requirement. Meanwhile, it has good openness, man-machine interface and network support.

16. 概述了采用网络互联的专用数控测井地面系统——SGX3数控测井系统的整体设计思路。

The paper describes the system design of the special numerical control measure well system based on network SGX3 numerical control measure well system.

17. 分析了系统的软硬件结构,并实现了数控系统的网络功能。

The paper analyses the hardware and software structure and realize the net function of this numerical control system.

18. 并阐述了当体解软件的组败、构造和体解控造外口IPC、PMAC和DPRAM的特色。铺示了里背网络化造造开放式数控体解的一类旧方式。

Lastly, it expounds the constitution, structure of system hardware and quality of system control core IPC, PMAC and DPRAM, puts forward a new method of open NC system towards network.

19. 开放式智能化、网络化的数控技术是实现制造自动化、智能化、集成化和全球化的基础技术。

The open pattern of intelligent and network NC technology is the very basics for the realization of automatic, intelligent, integrate and global manufacture.

20. 从实现全球制造对数控系统的要求出发,提出了一种支持全球制造的网络数控系统,并给出了一个可行的方案。

On base of the request of world wide manufacture, the thesis puts forward a system of network NC supporting world wide manufacture industry and gives a realizable method.

21. 而DNC技术作为数控技术和网络制造的关键技术之一,得到了越来越广泛的应用。

DNC (Distributed Numerical Control) technology is one of the key technologies in Network manufacture and C. n.

22. 本文提出了基于人工神经网络的可靠性预测方法,建立了用于数控机床可靠性预测的三层BP神经网络模型,给出了具体的算法。

This paper puts forward the ways of reliability prediction based on artificial neural networks, builds the three layers BP neural networks model, and presents its arithmetic in detail.

23. 提出嵌入式新型网络数控系统中央数控单元硬件实现方案,搭建起中央数控单元先进精简指令集处理器和数字信号处理器的软件架构。

A hardware implementation scheme for the embedded-based network numerical control is proposed, and the software architectures of ARM and DSP modules of the central NC unit are introduced.

24. 然后提出了基于实时网络的数控系统通信平台,并将该通信平台划分为内部网络和外部网络。

Then it proposes the communication platform of CNC system which is based on real-time network, and divides it into internal and external network.

25. 实际应用表明,无线数控通信系统有利于更加灵活便捷地实现车间网络化制造系统。

Practical application proves that the CNC network system of the wireless communication can realize the networked manufacture system of the workshop.

26. 本文以数控系统的网络化趋势为切入点,研究并实现了实时网络数控系统通信平台,为数控系统的网络化实现奠定了底层通信基础。

With the trends of network-based CNC system as the point, this thesis researches and implements the real-time network CNC system communication platform, which for network-based is established.

27. 本文介绍了一种相控阵天线仿真的新办法:将功率分配网络、数控移相器、TR组件等射频电路和微带天线阵列进行联合仿真,得到综合的阵列天线远场情况。

Not only simulate patch array antenna"s EM performance, but also concern the affects of feed networks including power divider network, digital phase shifter, TR module etc.

28. 本文针对船舶操纵这种非线性、时变参数控制对象,提出了一种采用神经网络自适应PID控制方案。

In this paper, according to nonlinear and time-varying parameter of ship maneuvering, the scheme of neural network adaptive PID control is proposed.

29. 描述了一个基于网络的虚拟数控铣削系统。

This paper describes a Web-based virtual NC milling system.

30. 描述了一个基于网络的虚拟数控铣削系统。

This paper describes a Web-based virtual NC milling system.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!