
词语导航
基本信息
词语:加工温度
繁体:加工溫度
拼音:jiā gōng wēn dù
英语翻译
【化】 processing temperature
分词翻译
加工的英语翻译:
machining; process【化】 processing
【医】 elaborate; elaboration
【经】 extra work; process; processing; transform
温度的英语翻译:
temperature【化】 temperature
【医】 T; temperature
翻译例句
1. 自动弥补磨损和加工温度波动造成的变化。
Automatic compensation for wear and process temperature variations.
2. 结果表明:热加工温度过高是传动轴断裂的主要原因。
The results show that the primary cause of fracture of the driving-shaft is that the hot working temperature has been too high.
3. 加工温度、物料含水量对系统参数和大米膨化产品质量指标的影响极显著。
The system parameters and rice extrudate properties index were affected significantly by moisture content and barrel temperature.
4. 含氮不锈钢的高温热塑性主要受热加工温度、钢中硫含量、氮含量等因素影响。
The hot ductility is influenced by hot worked temperature, sulfur content, nitrogen content and so on.
5. 本文研究了刚性粒子PS添加量、基体韧性、加工温度对PVC冲击强度的影响。
The study was made on the effects of the contents of rigid PS particles, the toughness of PVC and processing temperature on PVC impact strength.
6. 原料中还原糖、 天冬酰胺含量及加工温度是影响食品中丙烯酰胺形成的主要因素。
The formation of acrylamide in food is influenced mainly by the content of reducing sugars or asparagine in materials and the processing temperature.
7. 选择较高的加工温度及较低的剪切速率,可以使共混物PP在高组成比时成为分散相。
Higher spinning temperatures and lower shearing rate caused PP to form disperse phase at higher composition ratio.
8. 研究不同的加工温度、混炼设备、加工工艺对纳米氧化锌在BR胶料中分散性的影响。
The influence of the mixing temperature, mixer and processing technology on the dispersibility of nano-ZnO in BR compound was investigated.
9. 提高PV C材料的加工温度或加快材料的延伸速率,均对提高PV C熔体弹性有利。
It was also found that both increasing processing temperature and extension rate were favorable to elasticity of PVC melts.
10. 减少原料中的还原糖或天冬酰胺含量及降低加工温度能显著降低食品中丙烯酰胺的含量。
Acrylamid content in materials decreases as the reducing sugars or asparagine decrease, and it decreases dramatically by lowering the temperature.
11. 基丁酸酯共聚物是作为均聚物PHB的降解率一般用途的首选是在其正常高熔体加工温度。
PHB copolymers are preferred for general purposes as the degradation rate of PHB homopolymer is high at its normal melt processing temperature.
12. 实验还表明,单丝的拉伸强度和相对伸长率与它的加工温度、形态和熔化程度有密切的关系。
The experiment shows that the tensile strength and elongation of monofilament depend largely on the processing temperature, morphology and fusion level.
13. 随着加工温度升高,工件表面逐渐产生回火马氏体,这是造成工件表面硬度下降的主要原因。
Tempered martensite was gradually generated as the cutting temperature increased, which is the main cause of the decrease in the hardness.WWw.WenTIyI.COM
14. 上述研究工作为具有扫描叠加过程特点的激光加工温度场精确建模和质量控制提供了理论基础。
The research work above provides theory basic for exactly modeling and quality controlling of laser processing temperature field having the character of scanning and superposing process.
15. 对于注射成型加工温度范围较窄的PET塑料,可利用热流道板实现一模多腔热流道注射成型。
For PET resin, the processing temperature window of which is relatively narrow, hot runner plate could be used in the multi-cavity hot runner injection molding.
16. 涂覆应用试验表明,该涂覆专用料产品质量稳定,成膜均匀,剥离强度高,且降低了加工温度。
The test of coat application shows that the film has stable quality, uniform film formation and high peeling strength, as well as lower processing temperature.
17. 研究了合金元素、加工温度、金属含量、第三组分对低熔点金属填充聚合物材料断口形貌的影响。
It studied the influences of alloy elements, processing temperature, contents of metal and additives on the fracture section morphology of low-melting alloy filled polymer.
18. 半固态成形具有加工温度低,变形抗力小的特点,为高效低能实现金属近净成形提供了现实可能。
Due to the special properties of semi-solid metal, it provides a possibility for metal near net shaping with high efficiency and low consumption.
19. 加工温度对第4区压力影响较大;物料含水量对扭矩、第5区压力、产品膨化率和含水量影响较大。
Compared with the barrel temperature, the material moisture shows more influence on the torque, the 5th zone pressure, the expansion rate, and the product moisture, except the 4th zone pressure.
20. 为解决PET塑料加工温度范围较窄,工艺性较差的问题,提出了PET吹塑瓶坯热流道模具设计方法。
A design method of hot runner mold for PET bottle base was proposed to extend the temperature range of PET resin for better processing.
21. 着重阐述了过氧化物的添加量、加工温度对聚丙烯、聚乙烯性能的影响和利用该技术开发的两种专用料。
The effects of the amount of peroxide and processing temperature on the performances of polypropylene and polyethylene, has been studied.
22. 半固态金属具有良好的流动性,易于通过普通加工方法制成产品,并且具有加工温度低,产品质量高等优点。
Semi-Solid Metal shows good flowable behaviour so that it could be manufactured easily by general working methods, and it also has some advantages such as low working temperature, high quality etc.
23. 结果表明,复合材料的力学性能随着加工温度的升高而下降。PMMA与PPS 基体以“海岛”状的形式存在;
The results showed the mechanical properties of the composite decreased with the rise of the temperature.
24. 结果表明,在试验设计的加工温度和物料含水量范围内,加工温度和物料含水量对螺杆扭矩、第4区压力、第5区压力、产品膨化率和含水量都有极显著影响。
Within the designed range, the temperature and material moisture influences on the torque, the 4th zone pressure, the 5th zone pressure, the expansion rate, and the product moisture are significant.
25. 当油进行商业加工的时候,首先要做的是在其中加入化学溶剂并把它加热到很高的温度,然后经过五六道程序的加工。
When an oil is commercially processed, the first thing they do is add solvents and raise them to really high temperatures, then put it though five or six processes.
26. 在准备棉花的所有化学加工过程中,温度,时处理的时间长度和化学品的浓度之间的关系非常重要。
As with all chemical process used in the preparation of cotton, the relationship between temperature, length of treatment and concentration of chemical is important.
27. 玻璃传送厚度可根据有关加工玻璃工艺要求调节,加热温度可按需要事先设定。
Send thickness of the glass can be processed in accordance with the relevant requirements of glass conditioning, heating temperature may need to set in advance.
28. 玻璃传送厚度可根据有关加工玻璃工艺要求调节,加热温度可按需要事先设定。
Send thickness of the glass can be processed in accordance with the relevant requirements of glass conditioning, heating temperature may need to set in advance.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
