
词语导航
基本信息
词语:丙烯酸剂
繁体:丙烯酸劑
拼音:bǐng xī suān jì
英语翻译
【机】 acryloid
分词翻译
丙烯酸的英语翻译:
【化】 acroleic acid; acrylic acid; propenoic acid
【医】 acrylic acid
剂的英语翻译:
【医】 agent
翻译例句
1. 在稀释剂中再溶解:喷到表面的丙烯酸漆通过稀释剂的蒸发来干燥。
Re-dissolve in thinner: When an acrylic lacquer is sprayed onto a surface it dries by evaporation of the thinner.
2. 研究了硫化剂TCY对丙烯酸酯橡胶(ACM)的硫化特性。
The vulcanization behavior of acrylate rubber(ACM) cured with trithiocyanuric acid(TCY) was investigated.
3. 探讨了丙烯酸与十四醇摩尔比,催化剂和阻聚剂的用量、反应温度及反应时间对酯化反应的影响。
The influence of acrylic acid and tetradecyl alcohol, amount of catalyst and inhibitor, reaction temperature, reaction time were investigated.
4. 用正交法探讨了以高锰酸钾为引发剂的竹纤维与丙烯酸接枝共聚改性反应。
An orthogonal method is used to study the grafting copolymerization of bamboo fiber with acrylic acid by using potassium permanganate as an initiator.
5. 研究了以硝酸铈铵、过硫酸铵、过硫酸铵-亚硫酸氢钠为引发剂玉米淀粉与丙烯酸的接枝共聚反应。wWW.WeNTiYI.Com
Graft polymerization of acrylic acid onto maize starch using ceric ammonium nitrate, ammonium persulfate and ammonium persulfate sodium bisulfate as initiators is studied.
6. 然后,结合丙烯酸树脂的光固化特点,从光源、活性稀释剂、引发剂体系等多方面考虑,主要是改进引发剂体系,找到了合适的抑制表面氧阻聚的方法。
Then, considering many respect such as light source, diluent and photoinitiator, mainly improving photoinitiating system, we found the solutions to oxygen inhibition of acrylic resin in uv-curing.
7. 在明胶上接枝丙烯酸丁酯是以硝酸铈铵为引发剂在水介质中进行的。
The grafting of butyl acrylate (BA) onto gelatin, using ceric ammonium nitrate (CAN) as redox initiator in aqueous medium, has been studied.
8. 室温交联丙烯酸皮革涂饰剂应用研究。
Study on Ambient Crosslinkable Styrene Acrylic Emulsion for applications in leather finishing agent.
9. 讨论了丙烯酸树脂、增粘树脂、交联剂等对双面压敏胶带性能的影响。
Effect of acrylic resin, tackifying resin and cross linking agent on properties of double sided pressure sensitive tape was discussed.
10. 泡沫抑制剂添加剂都是有机硅或聚丙烯酸酯。
Foam inhibitor additives are either silicones or polyacrylates.
11. 本文介绍了以无毒硅酸盐为主要防污剂、丙烯酸树脂为基料的无毒防污涂料的配方。
A formulation based on nontoxic silicate as antifouling agent and acrylic resin as binder was given.
12. 在合成丙烯酸酯浆料的过程中,乳化剂的使用在很大程度上影响着合成浆料的性能。
In the course of synthesizing acrylate size mixture, the using of emulsifier influenced synthetic size performance in some degree.
13. 以丙烯酸和十二醇为原料,在催化剂的作用下制备了丙烯酸十二酯。
Dodecyl acrylate is prepared from acrylic acid and dodecanol in the presence of catalyst.
14. 介绍了水性丙烯酸树脂体系中常用的几种交联剂,并且简要地概述了它们的交联机理、性能和研究进展。
Several common crosslinkers used in water-borne acrylic resins are introduced. The crosslinking mechanism, properties and development of these crosslinkers are also summarized briefly.
15. 介绍了降凝剂中间体丙烯酸高碳醇酯的合成和产品分离提纯方法。
Synthesis and purification of long chain alkyl acrylate as intermediate of pour point depressant were introduced.
16. 用电化学阻抗谱研究了丙烯酸系乳胶作为混凝土添加剂或钢筋表面涂层时对钢筋腐蚀行为的影响。
Acrylic emulsion was introduced into steel reinforcing concrete as concrete admixtures or rebar coatings in order to prevent steel reinforcements from corrosion.
17. 利用正交设计法研究由丙烯酸和十六醇为原料,对甲苯磺酸为催化剂,采用微波加热法合成丙烯酸十六酯。
The orthogonal design was utilized to study the hexadecyl acrylate synthesis by microwave irradiation using acrylic acid and hexadecyl alcohol as raw materials and toluene-p-sulfonic acid as catalyst.
18. 以丙烯酸酯类为单体,采用复合乳化剂研制了自交联无纺布胶粘剂。
Self crosslinking adhesive for non woven fabrics with acrylates monomers and compound emulsifier is prepared.
19. 研究了以过氧化苯甲酰(BPO)为引发剂、甲苯为溶剂的SBS接枝丙烯酸酯共聚反应。
The grafting-copolymerization of acrylate to SBS block copolymer in toluene solution with BPO as initiator was studied.
20. 在用之前添加硬化剂到丙烯酸瓷釉中。
A hardener is added to the acrylic enamel just before use.
21. 甲氧基丙烯酸酯类杀菌剂是一类低毒、高效、广谱杀菌剂,几乎对所有真菌病害均有良好的活性。
Strobilurin fungicide is a sort of fungicide with low toxicity, high efficiency and broad spectrum.
22. 研究发现:改性后的醇酸树脂与固化剂相容性很好,与丙烯酸树脂相容性较差。
The compatibility of the modified alkyd resin with curing agents and acrylic resin were reviewed.
23. 以甲基丙烯酸甲酯为硬单体,丙烯酸丁酯为软单体,丙烯酸为功能单体,环氧树脂为改性剂制备了密封胶用环氧改性丙烯酸树脂。
The epoxy modified acrylate resin for sealant is prepared with methyl acrylate as hard monomer, butyl acrylate as soft monomers, acrylate acid as functional monomers and epoxy resin as modifier.
24. 研究了氧化剂、还原剂以及温度对环氧丙烯酸酯胶粘剂性能的影响。
The effect of the oxidant, the reductant, and the temperature on the performance of the adhesive were investigated.
25. 本文研究了聚合引发剂、甲基丙烯酸酯、不饱和聚酯等浸渍微孔密封剂的几种主要组份对其耐热性的影响。
The effect of some components, such as initiator AIBN, methacrylate and unsaturated polyester, of impregnation microporosity sealants on their heat resistance were studied.
26. 研究纳米硅溶胶改性剂对水溶性丙烯酸树脂和钼酸盐组成的有机复合膜微观形貌及腐蚀行为的影响。
Effects of nano silicon sol on micro-morphology and corrosion behavior of organic composite film made up of water soluble acrylic resin and molybdate were investigated.
27. 以硝酸铈铵为引发剂将丙烯酸丁酯(BA)与淀粉(s)接枝共聚,考察了淀粉糊化对接枝反应的影响。
Graft copolymerizations of butyl acrylate (BA) onto starch (s) were carried out with ceric ammonium nitrate as initiator, and influence of starch pasting on graft reaction is tested.
28. 以混合聚醚多元醇、甲苯二异氰酸酯为主要原料,环氧树脂、羟基丙烯酸树脂为改性剂合成了湿固化聚氨酯涂饰剂。
The moisture cured polyurethane was synthesized with mixing polyether diol, toluene diisocyanate (TDI) as main raw materials, epoxy resin and hydroxy acrylic resin as modifiers.
29. 以混合聚醚多元醇、甲苯二异氰酸酯为主要原料,环氧树脂、羟基丙烯酸树脂为改性剂合成了湿固化聚氨酯涂饰剂。
The moisture cured polyurethane was synthesized with mixing polyether diol, toluene diisocyanate (TDI) as main raw materials, epoxy resin and hydroxy acrylic resin as modifiers.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
