
词语导航
基本信息
词语:内聚合物
繁体:內聚合物
拼音:nèi jù hé wù
英语翻译
【机】 interpolymer
分词翻译
内的英语翻译:
inner; inside; within
【医】 end-; endo-; ento-; in-; intra-
聚合物的英语翻译:
【化】 polymer
【医】 polymer; polymerid; polymeride
翻译例句
1. 每根钢索均由覆有薄聚合物管(预先包在不锈钢箔内)以防生锈。
Each steel cable is covered by a thin polymer tube (wrapped in stainless steel foil) to prevent rusting.
2. 因为在某些构型下聚合物内会出现相互作用,但是在其他构型下不会出现相互作用。
Because of some sorts of interactions that are possible in some configurations. And not in other configurations.
3. 长输管线系列球阀不仅选材广泛且内件材料均采用表面镀镍或是316材质、密封圈采用特制的聚合物材料。
Pipeline series ball valve is not only wide selection of parts and materials are used in nickel-plated or 316, seal with a special polymer material.
4. 结果表明,聚合物驱可有效地提高油层的动用状况,扩大平面波及系数,减小层间差异,使层内纵向动用更加均匀。
Results show that polymer flooding can improve the producing reserves effectively, extend the plane sweep efficiency, reduce the difference between layers and balance the in-layer vertical producing.
5. 他认为新型聚合物还可以用来清除废弃核电站里的污染。这些地方的管道内残余的放射性钴还仍然是一个问题。
He thinks that the new polymer could also be used to decontaminate decommissioned nuclear power-stations where residual radioactive cobalt in pipes remains a problem.
6. 导电聚合物作为新型多学科交叉的研究领域,备受世界范围内物理学、化学和材料科学家的关注。
The conducting polymer, as a new cross-subjects research field, has been widely investigated by physical scientists, chemists and material scientists all over the world.
7. 聚合物溶液在模型高渗透层内提高驱油效率作用的效果要好于中、低渗透层。
The effect of polymer solution on improvement of oil-displacement efficiency in high permeability layer is better than the effects in medium and low permeability layer.
8. 熔体充填过程是聚合物成型过程的一个重要阶段,该阶段涉及型腔内的压力变化及熔体前沿界面问题。
The melt filling stage is one of the most important stages of the polymer molding; this stage involves the variation of the pressure and the movement of the front interface.
9. 利用扫描电镜和紫外光谱考察了内相聚合物浓度和搅拌速度对微球粒径和药物包封率的影响。
The effects of polymer concentration and agitation rates on the size of microspheres and drug incorporation efficiency were studied by scanning electronic microscopy (SEM) and UV-spectrophotometry.
10. 本发明公开的一个方面涉及包括掺入脱乙酰壳多糖聚合物基质内的溶菌酶的复合膜。
One aspect of the disclosure herein contemplates a composite film comprising lysozyme incorporated within a chitosan polymer matrix.
11. 在静脉注射前事先给予动物游离的叶酸,将降低癌组织内的叶酸靶向聚合物。
The tumor tissue localization of the folate-targeted polymer could be attenuated by prior i. v. injection of free folic acid.
12. 该稀释剂包括至少一种内稀释剂和一种增稠稀释剂,选自聚合物如淀粉或淀粉衍生物。
The latter contains at least one intrinsic diluent and one thickening diluent chosen from polymers such as starch and starch derivatives.
13. 一个办法是保持足够的剪切以快速清洁机筒内表面。因为当聚合物与金属接触太长时间后会发生聚合物降解。
One solution is to maintain sufficient shear to wipe the metal surfaces constantly, since most polymer degradation occurs when polymer contacts metal for too long.
14. 在聚合物驱及聚合物交联微凝胶驱后,地层内剩余油主要分布在中、低渗透层,这是进一步提高采收率的潜力所在。
After polymer flooding and polymer cross link micro gel flooding, the residual oil mainly distributes in middle and low permeable reservoirs. This is the potential area of EOR.
15. 通过改变聚合物溶液浓度和岩心渗透率,计算了较宽浓度范围和渗透率范围内的衰竭层效应。
The depleted effects in a wider range of concentration and permeability of polymer solution were calculated with variations of polymer concentration and core permeability.
16. 本文对无定形聚合物的内聚能密度的温度依赖性进行了研究。
The dependence of amorphous polymer cohesive energy density on temperature is studied.
17. 根据超声作用机理,超声技术可以克服聚合物表面和吸附质间的亲和力,加快聚合物内的扩散以及表面的分子传递。
Ultrasound can overcome the affinity of the adsorbates with the adsorbent surface and accelerate the molecular transport towards and from the adsorbent surface.
18. 目的研制一种血管内治疗颅内动脉瘤的液体栓塞剂—醋酸纤维素聚合物(CAP)。
Objective To research the cellulose acetate polymer (CAP) solution which was used as a new liquid thrombotic material for endovascular treatment of intracranial aneurysm.
19. 体系中聚合物浓度低于第一临界浓度时,体系内只有分子内交联;
Under the 1~(st) critical polymer concentration, the crosslinking reaction is took place only inside the molecule.
20. 以单体、球型肌动蛋白的形式出现,为一种球状蛋白质;在活体细胞内以聚合物、丝肌动蛋白的形式出现,像两串彼此缠绕拧成一条细丝的珠子。
It occurs as a monomer, G-actin, a globular protein, and in living cells as a polymer, F-actin, which resembles two strings of beads twisted around each other into thin filaments.www.WENTIyI.cOm
21. 但是改性聚合物锂离子电池逐渐进入人们视线,并将首先被应用于笔记本电脑上,这使得在小规模内使用混合动力飞机变得可能。
But with the advent ofimproved lithium-polymer batteries, similar to what you"d find in a laptopcomputer, hybrid aircraft – albeit at asmall scale – are now starting to become viable.
22. 本文介绍了合成聚合物表面施胶剂AGP在胶版印刷纸和牛皮箱纸板生产中的应用试验,结果表明用AGP进行表面施胶能较大程度地提高纸的抗水性能,并可减少浆内施胶剂的用量。
The results proved that the use of the AGP as a surface sizing agent can improve the water-resistance of the paper and reduce the use of the internal sizing agent.
23. 产品成分:去离子水、丙二醇、丙烯酸聚合物、西曲氯铵、木瓜提取液、甘草提取液、DMDM乙内酰脲、香料。
Ingredients: Deionized Water, Propanediol, Acrylic Acid Polymer, N-Hexadecyltrimethylammonium Chloride, Pawpaw Extract, Melarrest l, DMDM Hydantoin, Essence.
24. 的电子性质的聚合物和它们的模型化合物的良好的相关性与承兑人强度,骨干的共面性,和分子内电荷转移。
The electronic properties of the polymers and their model compounds are well correlated with the acceptor strength, coplanarity of the backbone, and intramolecular charge transfer.
25. 采用内管网高分子聚酯类聚合物(PLGA)材料作为支架。
PLGA inner tube array was used as scaffold.
26. 产品成份:去离子水、丙二醇、丙烯酸聚合物、西曲氯铵、木瓜提取液、海藻提取液、DMDM乙内酰脲、香料。
Ingredients: Deionized Water, Propylene Glycol, Acrylic Acid Copolymer, N-Hexadecyltrimethylammonium Chloride, Papaya Extract, Alga Extract, DMDM Hydantoin, Essence.
27. 产品成份:去离子水、丙二醇、丙烯酸聚合物、西曲氯铵、木瓜提取液、海藻提取液、DMDM乙内酰脲、香料。
Ingredients: Deionized Water, Propylene Glycol, Acrylic Acid Copolymer, N-Hexadecyltrimethylammonium Chloride, Papaya Extract, Alga Extract, DMDM Hydantoin, Essence.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
