大锥用英语怎么说,大锥的英文翻译


词语导航

基本信息

词语:大锥

繁体:大錐

拼音:dà zhuī

英语翻译

auger

分词翻译

大的英语翻译:

big; great; large
【医】 macro-; magnum; makro-; megalo-

锥的英语翻译:wWw.wEntIYI.Com

awl; prick; wimble
【医】 cone; drill

翻译例句

1. 增设卷锥筒装置,实现大锥度的零件卷制。

Add up tapering reel and realize zero-piece coiling with great taper.

2. 即在大锥齿轮的齿面上涂一层薄而均匀的红铅油,然后转动齿轮数圈。

Paint the tooth flank of the big bevel gear with a thin and equal red lead coat.

3. 利用此法可制备出尖端锐利、大锥角或多锥体等各种结构的光纤探针。

Probes of various structures, such as large cone angle and short taper or multi-taper, can be formed with the combination of the static and dynamical chemical etching methods.

4. 基于液压传递原理,设计出一种用动态化学腐蚀法制备大锥角近场光纤探针的装置。

According to the hydraulic transmission principle, a device for fabricating large cone Angle near-field optical fiber probe by means of dynamic chemical etching is developed.

5. 针对大于5度的大锥角圆锥滚子加工工艺的特殊性,进行反复试验,摸索出可行的加工工艺。

For processing specificity of big cone Angle with exceeding5 degrees, the tests were repeatedly conducted so as to explore feasible processing technology.

6. 对大锥角防热层的亚缺陷进行无损检测、烧蚀性能、力学性能及扫描电镜分析,分析表明亚缺陷对材料的结构和性能有一定的影响。

It is indicated that the sub default has influence on materials microstructure and some properties on the basis of NDT, TEM and analysis of ablative and mechanical property.

7. 设计了一种第一级能够形成环形射流的W型聚能装药,第二级采用大锥角聚能装药的串联战斗部,并且通过试验研究了该种战斗部对靶板的毁伤效果。

W type liner that can form annular jet is adopted as the forward charge and the wide Angle shaped charge is adopted as the follow through one.

8. 公园内有数级熔岩台地,主要有环火山口熔岩台地、环火山锥熔岩台地和裂隙溢出的熔岩台地,面积大、坡度平缓。

There are several levels of lava platform in the park, the main ring lava ring platform, ring volcanic cone lava platform and the overflow of lava platform, large area, gentle slope.

9. 泡桐属一种中国产的泡桐属落叶乔木,具有心形的大对生叶片,淡紫色或白色锥状花冠,内部具有花斑。

Any of several Chinese deciduous trees of the genus paulownia having large heart-shaped opposite leaves and pyramidal panicles of purplish or white flowers with a spotted interior.

10. s头管-标准大柄接受器和锥设计,传统反应特点,用于SL 4747和SL 4762。

Leadpipe - features Remington large shank receiver and longer taper designed for traditional response characteristics. For SL4747 and SL4762.

11. 舵装置的键槽是内孔键槽,孔为锥孔、盲孔,而且采用双键联接结构,尺寸大,加工精度较高。

The rudder device keyway to hole keyway , Hole of the conical hole, Not run through the holes, Moreover structure of two key connection , Large size , High precision machining.

12. 泡桐属一种中国产的泡桐属落叶乔木,具有心形的大对生叶片,淡紫色或白色锥状花冠,内部具有花斑。

Any of several Chinese deciduous trees of the genus Paulownia, having large, heart - shaped, opposite leaves and pyramidal panicles of purplish or white flowers with a spotted interior.

13. 螺旋锥齿轮副的成形法大轮,利用合适的成形铣刀,在通用的立式加工中心上,可以实现热处理后硬齿面的高速铣削。

For spiral bevel gears" formate gear, using proper figurate cutting tool and generic CNC machining center, the gear"s hard tooth-surface can be milled with high speed.

14. 考察了9种大孔吸附树脂对紫锥菊中菊苣酸的吸附分离性能,确定大孔吸附树脂吸附分离菊苣酸的工艺条件。

In order to set up the technology for adsorbing and separating cichoric acid from Echinacea purpurea with macroporous adsorption resin, 9 types of resin were investigated.

15. 为了满足螺旋锥齿轮等大型零件的脉冲电化学光整加工的要求,设计了高频、窄脉宽、大电流的脉冲电源。

To meet with the requirement of PECF finishing, pulse power source with high frequency, narrow pulse width and high current is designed.

16. 结果表明,在大、小锥段交接处附近的流场更加顺畅,特别是水力旋流器轴向速度的波动明显减少。

The result shows that the flow field near the connection of the big and small cone sections is more fluent, particularly the fluctuation of the axial velocity of the hydrocyclone is greatly reduced.

17. 国产的泡桐属落叶乔木,具有心形的大对生叶片,淡紫色或白色锥状花冠,内部具有花斑。

Any of several Chinese deciduous trees of the genus Paulownia, having large, heart-shaped, opposite leaves and pyramidal panicles of purplish or white flowers with a spotted interior.

18. 沿大裂谷形成的火山大爆发这个问题和其他“大弹坑,”以及在底部渣锥。

Large volcanic eruptions along the Great Rift formed this and other "big craters," as well as the cinder cones at the bottom.

19. 主传动为螺旋锥齿轮,承载能力大,效率高。

Main transmission is spiral bevel gear, Strong in load bearing, high in efficiency.

20. 一种是大扩压角内有分割锥的扩压器 ;

The first scheme was a diffuser with wide cone angle.

21. 利用此方法,用较少的刀具规格,可以将弧齿锥齿轮大轮的凸凹面一次性切出,提高制齿效率。

By use of the method, the bigger one"s convex and concave of spiral bevel gears can be cut out one-through with few format of cutters, which can improve the efficiency of processing the gears."

22. 对大规格螺旋锥齿轮齿形误差的在机测量方法进行了研究。

Research on Coordinate Method for Measuring the Profile Error of Wormgears;

23. 对大规格螺旋锥齿轮齿形误差的在机测量方法进行了研究。

Research on Coordinate Method for Measuring the Profile Error of Wormgears;

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!