
词语导航
基本信息
词语:热变形
繁体:熱變形
拼音:rè biàn xíng
英语翻译
【化】 thermal collapse
相关词条
1.heatdistortion 2.thermaldistortion 3.hotdeformation 4.thermaldeformation 5.warpage分词翻译
热的英语翻译:
ardent; caloric; craze; eager; fever; heat; hot; warm【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-
变形的英语翻译:
transmute; distort; metamorphose; distortion; metamorphism; transfigurationtransformation; transmutation
【化】 anamorphosis; deformation; distortion; transform
【医】 allaxis; deformation; deformity; distortion; dysmorphia; dysmorphosis
malformation; metallaxis; metamorphosis; transformation
翻译例句
1. 没有热变形提高了高精度的准确性。
No heat build up or deformation provides high precision accuracy.
2. 热变形量往往超出允许的误差。
The thermal deformation often exceeds the allowed error.
3. 保持在热变形温度或玻璃态温度以下。
This shall remain below the heat deflection temperature or glass transition temperature.
4. 并对丝杠的热变形规律进行了分析总结。
The rule of ballscrew thermal deformation is given and summarized.wwW.WEntIyi.COm
5. 它具有高强度,刚度和良好的热变形温度。
It exhibits high strength, rigidity, and good heat distortion temperature.
6. 本文探讨了热变形高铬铸钢中颗粒状碳化物的形成。
This paper deals with the granular carbides formation from hot deformation in high chromium cast steel.
7. 且对孔形零件在工作情况下的热变形进行了理论推导。
Theoretical derivation was carried out upon thermal deformation of hollowed parts under operating conditions.
8. 主轴单元的热变形是高速加工中影响精度的主要因素。
Thermal deformation is the main factor that influence the machining accuracy of the high-speed spindle.
9. 该复合材料的热变形温度有所降低,但线膨胀系数减小。
Thermal deformation temperature and liner expansion coefficient of the composite were decreased.
10. 惯性约束聚变靶场编组站大口径光学元件的热变形分析。
Thermal Transfiguration Analysis for the Large Aperture Optical Element of Switchyard in ICF Driver Target Area.
11. 实验结果表明,随着弹性体含量的增加,热变形温度降低。
The results showed that HDT of the elastomer-modified PP decreases with increasing the elastomer content.
12. 公司主要产品有:电子拉力、电子万能试验机系列;热变形。
Our main products are: E-Rally, electronic universal testing machine series; hot deformation.
13. 用有限元法分析了人字形螺旋槽机械密封的热变形和力变形。
Using finite element method, the thermal and mechanical deformations of herringbone spiral groove mechanical seal are analyzed.
14. 它结合了火焰高强度优良的平衡,刚度和热变形温度阻燃能力。
It combines flame retardant ability with an excellent balance of high strength, stiffness and heat distortion temperature.
15. 系统分析了高炉用新型埋管式铸铜冷却壁的热态性能及热变形。
The thermal properties and deformation of new type cast copper stave with buried copper pipe were studied.
16. 最后分析了系统误差,并计算了系统误差对热变形测量结果的影响。
Finally the system error was analyzed and its effect was calculated to the measuring result of thermal distortion.
17. 导轨的热阻虚拟样机能够让我们深入理解导轨热变形的热力学机理。
This virtual prototype can let us thoroughly understand the thermodynamic mechanism of machine tool"s thermal distortion.
18. 文章对机床主轴组件温度场和热变形动态特性之间的差异进行了分析。
This paper analyzed the difference between the temperature filed and thermal deformation in dynamic characters for spindle components.
19. 并以此温度场为边界条件,利用FEA软件计算了机体热应力和热变形。
Then, the temperature field is loaded in FEA software to predict thermal stress and deformation.
20. 结果表明热变形对轴承性能的影响较小,而热弹变形对轴承性能影响较大。
The results show that the influence of thermal deformation on the bearing performances is smaller than that of thermal - elastic deformation.
21. 该树脂韧性好,其浇铸体的热变形温度高是一种综合性能良好的缠绕用树脂。
The resin toughness, the casting of the thermal deformation temperature is a good Comprehensive Performance winding resin.
22. 其基础树脂固化后的硬度和热变形温度较高,同时又具有良好韧性和耐气候性。
Based on the resin curing the hardness and thermal deformation temperature higher, but also has a good climate of tolerance and toughness.
23. 该树脂韧性好,其浇铸体的热变形温度高,是一种综合性能良好的缠绕用树脂。
The resin toughness is good, the casting body heat distortion temperatures are high, is a complex entanglement with a good performance resin.
24. 本文通过分析,探讨了电路板热变形的趋势,并得出了热变形动态补偿的方法。
This paper analyzes the tendency of the PCB thermal distortion, and gives the method for the dynamic thermal compensation.
25. 碳化物的析出量主要由形变温度和该形变温度下热变形奥氏体的组织状态决定。
The amount of carbides depends on deformed temperature and microstructure of austenite at thermally deformed at the deformed temperature.
26. 对哈勃太空望远镜太阳能帆板热变形的实例计算表明,数值解与理论解符合较好。
Numerical result of thermal deformation of the solar array on the Hubble Space Telescope agrees well with the analytical solution.
27. 本文就是适应这种要求而探讨了一种利用形状记忆合金控制在轨天线热变形的论文。
This article is just for the demand and discusses a method using Shape Memory Alloy to control the thermal deformation of antenna at orbit.
28. 减少机床热变形的方法为:进行热误差建模和补偿,温度控制,热态特性优化设计。
The methods to reduce the machine tool thermal deformation are: thermal error modeling and compensation, temperature control, optimization design of thermal state characteristics.
29. 基于热变形补偿对动静环进行了优化,并对优化前后动静环的热变形进行对比分析。
Based on the thermal deformation compensation, the rotary and stationary rings are optimized, and the thermal deformation before and after the optimization are attained and analyzed.
30. 基于热变形补偿对动静环进行了优化,并对优化前后动静环的热变形进行对比分析。
Based on the thermal deformation compensation, the rotary and stationary rings are optimized, and the thermal deformation before and after the optimization are attained and analyzed.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
