向轴的用英语怎么说,向轴的的英文翻译


词语导航

基本信息

词语:向轴的

繁体:向軸的

拼音:xiàng zhóu de

英语翻译

【医】 adaxial

分词翻译

向的英语翻译:

always; at; be partial to; direction; face; out; to; toward
【医】 ad-; ak-; ob-

轴的英语翻译:

axes; axis; shaft; spindle
【医】 ax-; ax.; axes; axio-; axis; core

翻译例句

1. 双万向轴的优化数学模型必须满足强度、刚度、振动条件、稳定性及边界条件的约束。

The optimal mathematical model of the double universal spindle must satisfy the constraints of strength, rigidity, vibration condition, stability and boundary condition.

2. 热成像仪、日光照相机和激光组成一个提供360度视觉的4轴万向节稳定装置。

Together, the thermal imager, daylight camera, and lasers are in a 4-axis gimbal stabilized pod that provides 360-degree coverage.

3. 最后,您向Gwitter添加了一个分页界面,用于显示rest式t witterAPI调用的结果,以便于返回朋友时间轴。

And finally, you added a tabbed interface to Gwitter to display the results of the RESTful Twitter API call to return your friends timeline.

4. 在本文中,您将向Gwitter添加身份验证功能,并使Gwitter能够请求和解析您的朋友时间轴。

In this article, you"ll add authentication capability to Gwitter and enable Gwitter to request and parse your friends timeline.

5. 传动轴在大多数后轮驱动的车辆中主要是靠传动轴和万向节连结着变速箱与后轮驱动桥。

Drive shaft a drive shaft and universal joints connect the transmission to the rear drive axle on most rear-wheel-drive vehicles.

6. 其输入轴与变速器的输出轴用万向传动装置连接。

Its input axis and transmission gearbox"s output shaft with the rotary transmission device connection.

7. 拆下转向轴处的万向节。

Remove universal joint at the steering spindle.

8. 该引脚正好符合了扩锥孔的垂直轴的轴线,要么径向或切向轴表面。

The pin fits snugly in a reamed tapered hole that is perpendicular to the shaft axis and either radial or tangential to the shaft surface.

9. 讨论了充气压力、密封压力与充气压力比、轴径对法向接触应力的影响。

The influence of pneumatic pressure, sealed pressure and axial diameter on normal contact stress was discussed.

10. 万向节十字轴的四个轴颈叫做万向节十字头,分别装在两个万向节叉顶端的轴承中。

The four arms of the spider, known AS trunnions, are ASsembled into bearings in the ends of the two shaft yokes.

11. 四元数就不会遭受万向节锁的痛苦,因为它不用三个分离的轴表示旋转。

Quaternions do not suffer from gimbal lock, because they do not express rotations relative to three separate axes.

12. 结果表明:珠光体裂纹萌生与扩展方式取决于珠光体层片和拉伸轴的位向关系。

The results indicate that the crack initiation and propagation mechanism depends on the orientation of pearlite lamellae with respect to the tensile axis.

13. 柱状晶向等轴晶转变(CET)是在一定的凝固过程中必须控制的一种显微组织转变。

The columnar to equiaxed transition (CET) is a kind of microstructural transformation in certain solidification, which should be controlled.

14. 结果表明:随着双线性耦合场或双二次耦合场的增加,交换偏置场的最大值位置向易轴靠近。

The results show that the maximum of the exchange bias field departs from easy axis with increasing the biquadratic-coupling field or bilinear field.

15. 文内见解对延长十字轴万向联轴器的使用寿命和结构的改进具有一定指导意义和参考价值。

This paper will have certain direct significance and referential value for prolonging the usage life and improving the structure of the cardan joint.

16. 该高速动车组的双联式虎克万向节传动轴,均匀传递转矩和旋转运动。

The dual units type Hookes cardan shaft of EMUS can transfer equably torque and rotating motion.

17. 该方法依据系统的轮廓误差,通过自适应模糊控制手段向各联动轴提供附加补偿作用,进而提高CNC系统的轮廓加工精度。

This method provides each axis with an additional compensating function according to the contour errors by adaptive fuzzy inference control, so the CNC system contour machining accuracy is modified.

18. 为了满足安装的要求,对国产齿轮泵的旋向、内油孔位置和花键轴等进行了改造。

The revolving direction, internal oil hole position and spline shaft of the domestic pump are modified to meet the installation requirement.

19. 研究了轴间角和转速对万向联轴器转矩的影响,并对影响程度做了定量分析。

The influence of interaxial break Angle and rotary speed on the torque is investigated and analyzed quantitatively.

20. 研究地应力、洞室开挖和加固等因素对地下洞室围岩稳定的影响,以验证地下洞室长轴选向的正确性。

A study is made for the influence of the factors, such as tectonic geostress, excavation sequences, and reinforcement, on stability of underground opening.

21. 本文通过对十字型滑块式万向接轴工作原理及其特性的分析,论证了什么样的布置是正确的。

A proper arrangement of the forked ends is given through analysing the working principle and characteristic of the slipper type universal coupling.wwW.wEntIYi.Com

22. 如何处理水平轴风力机中的轴向诱导因子和周向诱导因子是其气动设计和性能计算的关键问题。

How to treat the axial and circumferential factors is the key in the aerodynamic design and performance calculations for a horizontal axial wind turbine.

23. 文章介绍了万向轴驱动装置在高速列车和电动车组上的应用。

The applications of the cardan shaft driving device in high speed electrical locomotives and EMUs are described.

24. 根据有限元计算、断口分析和实测数据对万向接轴断裂的原因进行分析。

Based on finite element method, break analysis and the measured data, the paper analyzes the breakage reasons of universal joint.

25. 万向节机构的输入轴和输出轴的夹角是影响泵性能的一个关键参数。

The crossing Angle between the driving shaft and the driven shaft is a key parameter that affects the performance of the pump.

26. 万向接轴是轧机主传动系统的关键部件,具有结构复杂、工作时承受随机冲击扭矩等特点。

Universal joint, a key part of main drive system in rolling mill, has the characteristics of complicated structure and bearing impact twisting moment when working.

27. 随着基坑的开挖,锚杆承受的拉力越来越大且锚杆轴力峰值有向锚杆末端偏移的趋势。

The anchor tension increases with the excavation depth, and the peak value of the tension tends to move towards the end of the anchor.

28. 柱状晶向等轴晶转变(CET)的研究具有重要意义,数值模拟是其有效的研究方法之一。

It is of great significance to the research of columnar-to-equiaxed transition (CET), and numerical simulation is one of the valid methods.

29. 检查前万向节轴上的回旋式风箱是否损坏。

Check the convoluted air bellows on the front cardan shaft for damage.

30. 联邦德国的BMW公司开发了一种万向节传动轴与半轴的扭转试验台,专供四轮驱动型桥车试验用。

BMW Corporation of West Germany has developed a torsion rig for universal joint propeller shaft and axle shaft for the use of testing four-wheel-drive cars.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!