
词语导航
基本信息
词语:夹砂
繁体:夾砂
拼音:jiā shā
英语翻译
【化】 sand inclusion
相关词条
1.burningintosand 2.sonim分词翻译
夹的英语翻译:
clip; nip【医】 clamp; splint
砂的英语翻译:
【机】 sand翻译例句
1. 介绍夹砂缺陷的特征及其形成机理。
The features and formation mechanism of the scab defect was introduced.
2. 从而大大提高型砂的抗夹砂能力。
So as to improve the ability of anti sand sand.
3. 在粘土砂型铸造生产过程中经常出现夹砂类缺陷。
In casting iron production casting iron scab flaw is often found.
4. 生产夹砂管的关键设备是玻璃钢夹砂压力管缠绕机。
The winding machine is the key to produce FRP.
5. 挠曲性能是玻璃纤维增强塑料夹砂管的重要性能指标。
The deflection level is an important performance index for FRP m pipes and should be specially.
6. 目前,我国已经能够自主生产玻璃钢夹砂压力管缠绕机。
At present, China has been able to produce their own SGFRP winding machine.
7. 钒钛抗磨铸铁衬板的夹砂、断裂缺陷是影响质量的关键因素。
The scab and the fracture defect in VTi abrasion resistance cast iron sheathing board are the Key factors that influence its quality.
8. 长江引水三期工程采用大口径玻璃钢夹砂管,是首次在软土地基上敷设。
Large diameter GRP sand pipe used in Changjiang Water Diversion Project (III) is paved for the first time in the soft ground.
9. 防止夹砂缺陷的主要措施是降低型砂的膨胀应力和提高型砂的热湿拉强度。
Reducing expansion stress of the moulding sand and increasing wet tensile strength of moulding sand are the main measures to prevent scab defect.
10. 篮纹、绳纹和附加堆纹是其主要纹饰,夹砂灰陶、泥质灰陶是为主要质地。
Basket veins, rope veins and addition veins are main veins, gray pottery with sand and soil is main quality.
11. 前者是以手制泥质红陶和夹砂红陶上具有彩绘和绳纹为特色,称为彩陶文化;
The former is based on hand-made terra-cotta and coarse terra-cotta clay that has painted and Jomon features, known as the painted pottery culture;
12. 玻璃钢夹砂管道(以下简称夹砂管)是玻璃纤维与合成树脂及石英砂的复合体。
The sand inclusion glass fiber reinforced plastic pipe takes thermosetting resin as base body, take glass fibre and its products as reinforced material.wwW.wEnTIyI.CoM
13. 生产结果表明,铸件没有气孔、夹砂、夹渣、收缩等铸造缺陷,铸件品质稳定。
The result shows that there are no casting defects, such as shrinkages, blowholes, and slag inclusions and the quality of casting is steady.
14. 介绍了定长缠绕玻璃夹砂管在石狮引水工程中的设计与安装,以及所取得的效果。
The design and installation of fixed Lenth filament wound sand- filling FRP pipe in Shishi city" s diversion Engineering and the final effects are introduced in this paper.
15. 并建议尽快制定玻璃钢夹砂管的管材标准、设计规范、施工规程以及质量验收标准。
It is suggested that the technical standards, the design specifications, the job specifications, and the quality requirements, be worked out as soon as possible.
16. 厚实板类铸件按传统工艺生产,容易产生缩孔、缩凹、缩松、夹砂、胀包等铸造缺陷。
The shrinkage cavity, depression, shrinkage porosity, scab and swell defects often took place with the heavy plate castings produced by adopting traditional foundry method.
17. 介绍了玻璃钢夹砂管道施工技术、设备、工艺及其在绥化市红兴水库供水工程中的应用。
This paper introduces the construction technique of the glass steel grit filled pipe, equipment, craft and the application of water supply engineering at Hongxing Reservoir in Suihua City.
18. 分析了一体式后从板座及上心盘座裂纹、夹砂等缺陷产生的原因,并介绍了工艺改进措施。
The causes to such defects as cracking and sand inclusion in the integral rear draft lug and the body center plate filler are analyzed, and the technology improvement measures are described.
19. 本文介绍了玻璃纤维增强塑料夹砂管生产过程中出现的质量问题并提出了相应的解决办法。
This paper describes problems in the quality control of FRPM pipes during the manufacture and gives the solution.
20. 运用均衡凝固技术解决平板类铸件的夹渣,夹砂和气孔等缺陷,提高铸件质量,降低废品率。
Utilizes the balanced coagulation technology solution plate class casting the entrapped slag, the sand inclusion, flaws and so on blowhole, improves the casting quality, reduces rejection rate.
21. 商时期文化遗存所出陶器同样以夹砂陶为主,泥质陶较少,器类主要有罐、釜、尊和器座等;
Shang deposit contained mainly Sandy ware, with fewer clay potteries. Major typologies included jar, Fu, Zun and vessel bases.
22. 在铸造生产中可以促进铸件的方向性凝固,防止粘砂、夹砂等铸造缺陷和改善铸件表面粗糙度。
When using in moulding sand, it can promote oriental solidification of castings and prevent burn-on and sand inclusion of castings, and improve roughness of castings.
23. 广西的石灰岩按性质可分为纯质石灰岩、夹硅质石灰岩、夹砂页岩或火成岩的石灰岩三种类型。
According to the nature, Guangxi limestone is separated into three types: pure limestone, siliceous limestone, mixed sand shale or limestone of igneous rock.
24. 玻璃纤维增强塑料夹砂管(离心浇铸工艺)作为顶管管材运用于顶管工程中的设计、施工介绍。
Glass fibre reinforced plastic mortar pipe(Centrifugal casting process)is introduced to be as jacking pipe material used in the design and construction of one jack engineering project.
25. 仰韶文化的制陶工艺相当成熟,器物规整精美,多为细泥红陶和夹砂红陶,灰陶与黑陶较为少见。
Yangshao culture of the ceramic technology is mature, beautifully structured objects, mostly small mud Hongtao and RPM Hongtao, Huitao black pottery and more rare.
26. 国际上现有三种制造夹砂压力管的工艺方法。它们分别是,交叉缠绕工艺、连续缠绕工艺和离心浇铸工艺。
The three most commonly used method of manufacturing FRP are Cross-winding process, continuous winding process and the centrifugal casting process.
27. 详细分析了不锈钢熔模铸件夹砂(起皮)产生的原因,并提出了防止不锈钢铸件夹砂(起皮)的一系列措施。
The text detaily analyzes the cause of scab of stainless steel steel melt wax casting and proposes some measures to avoid it.
28. 对A30气缸体夹砂废品产生的原因,即型砂性能、铸件结构、浇注速度、浇注系统的布置等方面的要素进行了分析。
Analysis is done to the causes of reject A30 block with sand inclusion, i. e. the elements of molding sand feature; cast structure, casting speed and arrangement for casting system, etc.
29. 本实用新型公开了一种玻璃钢夹砂管,要解决的技术问题在于提供一种成本低且能有效利用管身强度的玻璃钢夹砂管。
The utility model discloses an FRPM (fiberglass reinforced plastic mortar) pipe and aims to provide an FRPM with low cost and available utilization for solving the technical problems.
30. 本实用新型公开了一种玻璃钢夹砂管,要解决的技术问题在于提供一种成本低且能有效利用管身强度的玻璃钢夹砂管。
The utility model discloses an FRPM (fiberglass reinforced plastic mortar) pipe and aims to provide an FRPM with low cost and available utilization for solving the technical problems.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
