阀门手轮用英语怎么说,阀门手轮的英文翻译


词语导航

基本信息

词语:阀门手轮

繁体:閥門手輪

拼音:fá mén shǒu lún

英语翻译

【化】 valve handle

分词翻译

阀门的英语翻译:

valve

手轮的英语翻译:

【化】 hand wheel

翻译例句

1. 配置这种备选件的阀门在执行器顶部安装一个手轮用于手动阀门操作。

Valves with this option have a hand wheel mounted on top of the actuator for manual valve operation.

2. 所有阀门都可以配置手轮、链轮和锥齿轮手轮和链轮。

All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.

3. 注明从阀门中心到手轮的所需加长件的长度。

Specify required extension length from centerline of valve to handwheel.

4. 订购手轮或链轮执行器时,要在主阀门订购代码基础上增加适当的执行器订购代码。

To order handwheel or chainwheel actuators, add the appropriate order code to the basic valve order code.

5. 不管阀门是在开启或是关闭位置,手轮总是处在相对于阀体的同样的位置。

The hand wheel is always in the same position relative to the valve body regardless of whether the valve is in the open or closed position.WWw.wenTiyi.CoM

6. 订购时,注明描述信息和从阀门中心线至手轮顶部或螺母的加长长度尺寸。

To order, specify description and extension length from center line of valve to top of handwheel or nut.

7. 如果操作装置的安装孔与阀门法兰孔没有对应上,就要把锁定螺栓退回,旋转手轮式的螺栓孔对准为止。

If the operator mounting holes do not line up with the valve flange holes, the stop screw (s) should be backed off and handwheel turned until holes are aligned.

8. 订购时,注明描述信息和从阀门中心线至手轮的加长长度尺寸。

To order, specify description and extension length from center line of valve to handwheel.

9. 运转原理:膜板阀是一种手轮型阀门,它采用两个由非穿孔横膈膜隔开的阀杆。这些横膈膜防止了沿着阀杆的泄漏。

Operating Principle: The diaphragm valve is a handwheel-operated valve, utilizing a two-piece stem separated by non perforated diaphragms. These diaphragms prevent leakage along the valve stem .

10. 铸钢阀门锤击手轮,阀座环,楔形闸板。

Cast Steel Valves Hammerblow Handwheel, Seat Rings, Wedges.

11. 这个尺寸必须至少为从阀门中心线至手轮距离长度的两倍。

This dimension must be at least twice the dimension from center line to handwheel.

12. 本装置由人力操作手轮,通过锥形齿轮等减速传动,直接驱动阀门阀杆上下移动,启闭阀门。

The device by the human operator launches, such as through the cone-shaped gear reducer drive, direct drive valve stem up and down movement of the valve gate.

13. 在阀门上,铝主要作为外部装饰材料装饰部件,如手轮或铭牌等。

In valves, aluminum is mainly used AS an exterior trim component such AS a handwheel or identification tag.

14. 扳手不能用于装有手轮的阀门。

Wrenches should not be used on valves equipped with hand wheels.

15. 用于手轮执行器阀门上的地轴承架可以在上方对阀门进行操作,包括手轮,暗杆,连接件,加长件,以及带闸板位置指示器的地轴承架。

A floorstand for handwheel actuated valves allows operation from above. Included is handwheel, non-rising stem, fittings, extension, and floorstand with gate position indicator.

16. 当手轮旋转,通过阀杆带动柱塞在孔架中间上下往复运动来完成阀门的开启与关闭功能。

When the hand wheel rotation, through the stem-driven plunger in the middle from KER to bottom hole reciprocating movement to complete the valves open and close function.

17. 当手轮旋转,通过阀杆带动柱塞在孔架中间上下往复运动来完成阀门的开启与关闭功能。

When the hand wheel rotation, through the stem-driven plunger in the middle from top to bottom hole reciprocating movement to complete the valves open and close function.

18. 许多实际应用要求闸阀、截止阀和截止止回阀采用齿轮装置来降低手轮的边缘拉力,使得靠一个人的力量就可以启闭阀门。

Many applications require gate, globe and stop-check valves to use gearing to reduce the hand wheel rimpull and thus allow one man to manually seat or unseat the valve.

19. 阀杆加长件由带连接在阀门上的联轴节的钢管长度,连接在手轮上的联轴节,或其它类型的操作机构组成。

The Extension consists of a length of steel tube with a coupling on one end to attach to the valve, and a coupling on the other end to attach to a handwheel or some other type of operating device.

20. 阀门启闭靠启动(手轮)气动装置来完成。

Valve on activated (hand wheel) pneumatic devices to be completed.

21. 阀门启闭靠启动(手轮)气动装置来完成。

Valve on activated (hand wheel) pneumatic devices to be completed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!