
词语导航
基本信息
词语:胶粘强度
繁体:膠粘強度
拼音:jiāo zhān qiáng dù
英语翻译
【化】 adhesive strength【医】 adhesive strength
分词翻译
胶的英语翻译:
glue; gluey; mucus; pastern; sticky
【医】 gloea; glue
粘的英语翻译:
mucosity; paste; stick; viscidity
【建】 mucopeptide
强度的英语翻译:
intension; intensity; strength
【计】 intensity
【化】 strength
【医】 intensity; strength
翻译例句
1. 利用碱性条件下酚化改性的麦草碱木素代替部分苯酚制备了高木质素/苯酚比例和胶粘强度高的木质素酚醛树脂(LPF)胶粘剂。
The lignin-based phenol formaldehyde (LPF) adhesive with high ratio of lignin to phenol and strong adhesive was prepared by using the wheat straw soda lignin (WSSL) phenolated in alkaline medium.
2. 测试了胶粘剂的本体强度、粘接强度和粘度。
The viscosity, bulk and adhesive strength were tested.
3. 利用剪切粘接强度、SEM等方法,考察了有机硅烷偶联剂的种类和处理方法对丙烯酸酯类胶粘剂,粘接强度的影响。www.WENTIyI.COm
The effect of kinds of polysiloxane coupling agents, different treatments on the adhesive strength has been investigated by using shear adhesive strength and SEM.
4. 研究表明甲苯二异氰酸酯对聚乙烯醇缩醛胶粘剂耐水性改性是可行的并且能提高胶粘剂的粘接强度。
The results of this paper have shown that it is successful for improvement on the water proof and adhesive strength of PVF with TDI.
5. 考察了各因素对反应型聚氨酯热熔胶粘接强度、固化速度等性能的影响。
The factors which influenced adhesive strength, curing speed of reactive polyurethane hot melt adhesive were studied.
6. 合成了两种硅氧烷环氧固化剂,并研究了它们对环氧树脂胶粘剂的粘接强度、折射率、透光性等方面的影响。
Two siloxane epoxy curing agents were synthesized, and the effects of the products on the adhesive strength, refractive index and transparence of epoxy adhesive were studied.
7. 重点讨论了环氧树脂种类、复配合固化剂比例以及促进剂用量对胶粘剂粘接强度和耐热性能的影响。
The influence of the kinds of epoxy resin, the proportion of composite curing agent , and the content of accelerant on the adhesive strength and heat resistant properties of adhesive were discussed.
8. 研究了影响氯丁胶粘剂拉伸强度主要因素,探讨了混炼胶、溶剂、树脂等对氯丁胶粘剂拉伸粘接强度的影响。
It is studied that the main influence factors on adhesive strength of CR adhesives, including mixed rubber, solvent, resin etc.
9. 前言:研究了影响氯丁胶粘剂拉伸强度主要因素,探讨了混炼胶、溶剂、树脂等对氯丁胶粘剂拉伸粘接强度的影响。
It is studied that the main influence factors on adhesive strength of CR adhesives, including mixed rubber, solvent, resin etc.
10. 间苯二酚二环氧醚胶粘剂是一种室温固化高强度胶粘剂。
Resorcin diepoxide ether adhesive is a high strength adhesive curing at room temperature.
11. 结果表明:该胶粘剂的粘结强度(尤其是初粘强度)和剥离强度有明显的提高。
The results showed that felting and peeling intension (especially early felting intension) of the adhesive were obviously advanced.
12. 粘合强度可以通过选择正确的基体材料、表面处理、胶粘剂和工艺参数得以保证。
The bonding strength is ensured by the correct choice of substrate material, surface preparation, adhesive and process parameter.
13. 环氧胶粘剂的耐蚀性能是通过测定其拉伸剪切强度来评定的。
The corrosion resistance of epoxy adhesive was assessed by its tensile shear strength.
14. 装配方式不合理,固定胶粘接强度不足和工艺不完善是导致引脚断裂的原因。
The fracture of the pins was caused by improper assembly flow and lower adhesion strength of the fixing glue.
15. 考察了活性单体、预聚体及偶联剂对紫外光固化胶粘剂的粘接强度、体积收缩的影响。
The effect of active monomers, oligomers and couple agent on shear strength and volume shrinkage of UV-curing adhesive was investigated.
16. 在环氧胶粘涂层中加入填料可提高其强度和耐磨性。
The strength and wearing resistance of epoxy bonding can be improved by adding fillers.
17. 研究了原材料的用量变化对胶粘剂粘接强度的影响。
The effects of dosage of each material on the bonding strength were studied.
18. 异种三胶粘剂粘结强度可比提供总额蚀刻系统。
Xeno III Adhesive provides bond strength comparable to total etch systems.
19. 皮革和制鞋材料用胶粘剂。粘结强度。最低要求和胶粘剂分类。
Adhesive for leather and footwear materials. bond strength. minimum requirements and adhesive classification.
20. 与K - 35固化剂组合,形成热固化胶粘剂,即使120度也能保持很高的机械强度。
With hardener K-35 forms heat curing epoxy adhesive characterized by outstanding mechanical strength even at 120 deg c.
21. 试验表明,该胶粘剂具有成本低、粘接强度高、干燥速度快等特点,完全可以满足高速纸管包装的要求。
The trial showed that this kind of adhesive has specialities of low cost, fast dry, high strength, it can satisfy the needs of packing high speed paper-tube.
22. 该胶粘剂粘接强度高,固化速度快,耐温良好,储存稳定性佳,符合客户提出的工艺要求,并已成功地应用在生产线上。
The adhesive has the performances of high shear strength, rapid curing, high-temperature resistance as well as long storage life and has been applied successfully on the assembly line.
23. 改性后的玉米氧化淀粉胶粘剂粘接强度好、糊化温度低、粘度适当、抗水性好。
The modified starch adhesive has consistent quality of good viscosity, low gel temperature, good wet tack and water resistance.
24. 在低毒脲醛树脂胶粘剂合成过程中加入淀粉或氧化淀粉,能有效地改善胶合板板坯的预压性能和胶合板的胶接强度。
Adding amylum or oxidized amylum in the synthesis process of low toxic urea-formaldehyde resin can improve pre-press capability and bonding strength of plywood.
25. 本文叙述了DK-2抗磨胶粘剂的配方、物理性能和粘接强度。
The formulation, physical properties and bonding strength of Adhesive DK-2 are described in this per.
26. 并且讨论了软、硬单体配比,宫能单体含量及乳化剂用量等因素对压敏胶粘度、快粘力、持粘力、剥离强度等性能的影响。
The effects of propdrtion of soft and hard monomer, the content of functional monomer and emulsifier on the viscosity, ball tack and hold tack, peeling strength of adhesives were discussed.
27. 而对于低弹性模量胶粘剂接头,间隙使得接头上的应力峰值明显上升,可能导致接头的名义强度和实际强度显著降低。
On the other hand, the recessing in the joint with low elastic modulus adhesive caus es the peak stresses increase evidently that may decrease the nominal and actual strength of the joint markedly.
28. 测试了固化后的聚氨酯胶粘剂胶片的性能,讨论了分子结构对拉伸强度和伸长率的影响。
The effect of molecular structure of polyurethane on tensile strength and percentage elongation were evaluated by measuring the mechanical properties of the cured resin films.
29. 测试了该胶粘剂试样在高温状态下产生的烟雾信号的透过率以及常温粘接强度和工艺性能。
The transmittance of smoke signal at high temperature and the bonding and technical properties of the adhesive were tested.
30. 测试了该胶粘剂试样在高温状态下产生的烟雾信号的透过率以及常温粘接强度和工艺性能。
The transmittance of smoke signal at high temperature and the bonding and technical properties of the adhesive were tested.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
