
词语导航
基本信息
词语:抑制电路
繁体:抑制電路
拼音:yì zhì diàn lù
英语翻译
【计】 suppression circuit
相关词条
1.killercircuit 2.inhibitcircuit 3.suppressioncircuit 4.suppressedcircuit分词翻译
抑制的英语翻译:
restrain; subdue; suppress; withhold; control; choke; curb; hold; represssmother; stifle; strangle
【计】 suppression
【化】 inhibition
【医】 ant-; anti-; check; inhibition; ischo-; repression
电路的英语翻译:
circuit; circuitry【计】 electrocircuit
【化】 circuit; electric circuit
【医】 circuit
翻译例句
1. 为了满足电磁兼容性和安全性要求,设计了EMI抑制电路。
The EMI suppression circuit is designed to meet the requirements of electromagnetic compatibility and safety.
2. 提出了一种用CPLD实现的高精度新型脉冲干扰抑制电路。
A new design of circuit with pulse disturbance restriction based on CPLD is presented.
3. 本发明提供一种电路断路器,其可以抑制电路断路器的高度方 向尺寸。
The invention provides a circuit breaker, which can inhibit height, direction and size of the circuit breaker.
4. 在带宽限制放大器电路的设计中使用了全差分运放结构,能有效抑制电路的共模噪声。
A fully differential operational amplifier is introduced in the design of wideband limiting amplifier which can restrain the common noise effectively.
5. 为了提高前置级的共模抑制能力,采用了共模信号的抑制电路—右腿驱动和浮地跟踪。
The design adopts the circuit for constraining the in-phase signal, in order to improve the system"s CMRR.
6. 它是通过混沌电路的耦合,使耦合轨道相互靠拢,轨道距离减少,从而抑制电路中的噪声。
By coupling of many chaotic circuits, orbits can be closed each other, distance can be shorted, and noise in measuring can be reduced.
7. 处理通过不同的两个图像读取手段读取的图像数据时,能抑制电路规模扩大,有效地进行处理。
When processing the image data read by two different image reading means, the enlargement of the circuit scale can be prevented for effective processing.
8. 在该基波抑制电路中设计了中和电路,消除了分布电容的影响,提高了基波抑制电路的应用范围。
The designed neutralization circuit reduces the effect of distributed capacitance and expands the application scope of the fundamental suppression circuit.
9. 设计了一个测量放大器电路,它由差动放大电路、共模抑制电路、双端单端转换电路和程控增益放大电路组成。
A measurement amplifier circuit is designed, which consists of circuits of differential amplifier, a common-mode rejection, double-end and single-end conversions and programmed gain amplifier.
10. 对功率因数校正器辅助电路中的滤波电路设计、起动电流抑制电路的设计和开关的浪涌吸收保护电路的设计进行了分析。
The design of the filter circuit, starting current check circuit and switching surge absorption-protection circuit in an auxiliary circuit of PFC is analyzed.
11. 提出了一种适用于电容检测型微机械陀螺的信号检测电路并分析了其对噪声的抑制能力。
A circuit used for detecting the signal of the micromachined gyroscope with capacitive detection is pre-sented, and its capability of restraining noise is also analyzed.
12. 文章介绍了数字电路设计中的信号完整性问题,探讨了振铃、边沿畸变、反射、地弹、串扰和抖动等各种信号完整性问题的成因和抑制措施。
Signal integrity in the circuits design is discussed in this paper, and the major influencing factors are analyzed such as ringing, border distortion, reflection, bounce, crosstalk and jitter.
13. 但最根本的应该是在印刷电路板设计、元器件布置和连接线的安排上下功夫,抑制共模骚扰源的产生。
But most attention should be put on the PCB design, elements position and line connection, which can suppress the source of the common mode disturbance.
14. 信号处理电路具有较强的抑制噪声干扰能力。
The signal processing circuit has strong ability to suppress noise interference.
15. 选择合适的电路形式,再分析它们的频率精度和噪声抑制要求,以及对信道的线性要求。
Selecting the appropriate circuit model and then analyzing their frequency accuracy, the requirement for the noise suppression and channel linearity.
16. 根据互相关原理,设计了相应的硬件相关电路,有效的抑制了噪声并能够提取缺陷信号的微小变化量。
According as principal of cross-correlation, the hardware circuit is used to restrain noise efficiently and acquire faint change of crack signal.
17. 信号处理电路具有较强的抑制噪声干扰能力。WWw.wENTiyi.com
The signal processing circuit has high ability to suppress noise interference.
18. 其主要特点是通过特殊电路提高信号的幅度和占空比,同时抑制日光干扰。
It is chiefly characterized by increasing the amplitude and the duty cycle of the signal, and reducing the interference of the daylight with a special circuit.
19. 用较简单的电路形式实现了低功耗和高电源抑制比的PTAT电流产生电路和CTAT电流产生电路。
We obtained PTAT and CTAT current generator with low power consumption and high PSRR, which in a simple circuit structure.
20. 结果表明在功放设计中,优化设计输出匹配电路可以有效抑制功放的谐波失真。
It shows that the harmonics distortion can be effectively suppressed by optimizing output matching circuits.
21. 前者可延长曝光时间来消除,后者可通过高填充因子和放大滤波电路予以有效抑制。
The former can be eliminated by prolonging exposure time and the latter can be inhibited effectively by selecting higher fill factor and adopting amplifying and filtering circuits.
22. 该技术充分利用了PN结反向饱和电流是温度敏感函数的特性,使用简单的电路结构,达到了很好的温度特性和电源抑制性能。
The sensitive temperature characteristics of PN junction inverse saturation current is fully utilized to obtain good temperature coefficient and PSRR with simple circuit structure.
23. 通过增加一些辅助电路,提高了电路的电源抑制比。
By adding some auxiliary circuits, the power rejection ratio of the circuit is improved.
24. 提出相应的相位均衡、温度补偿、阻抗均衡及寄生通带抑制等电路提高雷达接收性能。
Methods of phase equalizing, temperature compensating, impedance equalizing and spurious band suppression are proposed to improve the receiving performance of radar.
25. 内部电路保护包括滞后过热关机,瞬态抑制二极管及交叉电流保护。
Internal circuit protection includes thermal shutdown with hysteresis, transient-suppression diodes, and crossover-current protection.
26. 该电路有较低的温度系数和较高的电源抑制比。
This circuit features low temperature coefficient and high power supply rejection ratio.
27. 通过对系统的细致分析,有效地抑制了电路噪声和数字脉冲干扰。
The circuit noise and digital pulse interference have been restrained effectively through the system analysis.
28. 一种利用闭环控制电路抑制气敏元件零点漂移的设计思想、原理框图及实验结果。
The design idea, principle scheme and executive result for restricting zero drift of gas sensors by means of closed loop control circuit are reported.
29. 一种利用闭环控制电路抑制气敏元件零点漂移的设计思想、原理框图及实验结果。
The design idea, principle scheme and executive result for restricting zero drift of gas sensors by means of closed loop control circuit are reported.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
